BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 120.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: seeksilence1 on July 14, 2019, 08:21:17 AM

I am still have some confusion about the abn and pog. Will the abn mining affect the coin age for pog and how?

Yes, ABN will affect POG, but only to the degree that you are actually solving blocks.
If you had 256,000 total coin*age in the wallet, and you create an ABN for 128k, you still have 256K coin*age for the GSC transmission for POG (If you didnt solve a block).
But if You did solve a block before the gsc transmission hits, the GSC txid creator would only have 128K to work with. If your GSC percent is set at .50, it would only be able to send a GSC of 64K coin age.

You can also type 'exec createabn nnnnn' with the amount you specify (such as 128000), and it will show you which coins are allocated toward the ABN, and that would give you an idea which coins would be spent (if you solve a block) and not available for the next gsc.

So basically: Pog & ABN share the same UTXO base.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: dave_bbp on July 14, 2019, 06:15:15 AM

Quote from: kudos_mpm on July 14, 2019, 02:36:09 AM

if i mined as funded worker, how many percent do i get compare to the one who funded me?

It's stated at the pool's "About" page under "Funded miner ABN fee (Funded Block Solve Ratio):" (currently 50 %).

@Rob: just tested the dual mining feature in my Windows wallet by restarting my wallet with the 2 IDs in the config and simply not unlocking it for ABN. It correctly switched to funded, nice work there.

Then I used the cli with headlesspassword to unlock the wallet, but it never switched back, although my abnweight was far above the current requirement. How long should it usually take to switch back? I waited maybe half an hour.

The linux wallets don't have this feature yet, right? Because on those it didn't work.

btw: watching getmininginfo today sometimes showed "received a stale block form the pool... Please wait". Any chance to avoid this?

1) On using cli to enter headlesspassword, and having it switch back, I believe it takes about 3 minutes. Please let me know if it didn't eventually switch? If it didn't I can take a look at that switching time. It might have taken one whole block to switch because the miner had a valid ABN for that block.

2) On the received stale block, yes, I am aware of that one, but it should be very little computer time - IE like when the machine is just getting started with mining, or switching over etc. It usually only happens when the pool is having trouble supplying you with an abn and it delays for a few seconds. Let me know if you see this happening more than .01% of the time.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: kudos_mpm on July 14, 2019, 02:36:09 AM

if i mined as funded worker, how many percent do i get compare to the one who funded me?

Its a dynamic ratio (in the About page of the pool), currently at 50%.
So the funded worker gets debited 50% of their hashpower, while the non-funded workers run at full hashpower.
Then the rewards are paid based on HPS as usual (so the pool keeps zero of the ABN fees).

seeksilence1

newbie

Activity: 86

Merit: 0

I am still have some confusion about the abn and pog. Will the abn mining affect the coin age for pog and how?

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: kudos_mpm on July 14, 2019, 01:33:11 AM

Quote from: bible_pay on July 13, 2019, 09:16:30 AM

Quote from: jsheets1970 on July 13, 2019, 08:44:26 AM

Quote from: kudos_mpm on July 13, 2019, 04:45:16 AM

windows 10(64bit) wallet 1.4.4.1(h) cant connet to the pool.. I dont have problem connecting to the pool on windows 7 (64bit)

addnode=explorer.biblepay.org

pool=http://pool.biblepay.org

poolport=80

workerid=KMIS *note (Funded worker)

genproclimit=60

minersleep=0

gen=1

----------------------------

"blocks": 131417,
  "currentblocksize": 2484,
  "currentblocktx": 2,
  "difficulty": 3493.889791328252,
  "errors": "",
  "pooledtx": 2,
  "chain": "main",
  "genproclimit": 60,
  "networkhashps": 454494.8052647252,
  "hashps": 0,
  "minerstarttime": "07-13-2019 09:25:23",
  "hashcounter": 0,
  "pooledtx": 2,
  "chain": "main",
  "biblepay-generate": true,
  "poolinfo1": "",
  "poolinfo2": "",
  "poolinfo3": "",
  "abninfo": "Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti

Paste the full output of getnining info. Looks to me like it could not find your miner name and reverted you to solo mining or your use is not listed as funded. So grab a snapshot of your worker list also. That might be setup wromg

Yes, and I see a lot of windows10 users appear to not edit the correct biblepay.conf file.

Please navigate to:
%appdata%\biblepayevolution

Create the biblepay.conf there. Then look at it in DOS, and ensure its called "biblepay.conf" not "biblepay.conf.conf.txt" etc.

Happy mining!

im sure im on the right biblepay.conf... also looked it at DOS, it doest NOT have the .TXT extention.

I see the problem; please change pool=http to pool=https:// (Evo only supports HTTPS).
Remove poolport also.

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: kudos_mpm on July 14, 2019, 02:36:09 AM

if i mined as funded worker, how many percent do i get compare to the one who funded me?

It's stated at the pool's "About" page under "Funded miner ABN fee (Funded Block Solve Ratio):" (currently 50 %).

@Rob: just tested the dual mining feature in my Windows wallet by restarting my wallet with the 2 IDs in the config and simply not unlocking it for ABN. It correctly switched to funded, nice work there.

Then I used the cli with headlesspassword to unlock the wallet, but it never switched back, although my abnweight was far above the current requirement. How long should it usually take to switch back? I waited maybe half an hour.

The linux wallets don't have this feature yet, right? Because on those it didn't work.

btw: watching getmininginfo today sometimes showed "received a stale block form the pool... Please wait". Any chance to avoid this?

kudos_mpm

newbie

Activity: 14

Merit: 0

if i mined as funded worker, how many percent do i get compare to the one who funded me?

kudos_mpm

newbie

Activity: 14

Merit: 0

Quote from: bible_pay on July 13, 2019, 09:16:30 AM

Quote from: jsheets1970 on July 13, 2019, 08:44:26 AM

Quote from: kudos_mpm on July 13, 2019, 04:45:16 AM

windows 10(64bit) wallet 1.4.4.1(h) cant connet to the pool.. I dont have problem connecting to the pool on windows 7 (64bit)

addnode=explorer.biblepay.org

pool=http://pool.biblepay.org

poolport=80

workerid=KMIS *note (Funded worker)

genproclimit=60

minersleep=0

gen=1

----------------------------

"blocks": 131417,
"currentblocksize": 2484,
"currentblocktx": 2,
"difficulty": 3493.889791328252,
"errors": "",
"pooledtx": 2,
"chain": "main",
"genproclimit": 60,
"networkhashps": 454494.8052647252,
"hashps": 0,
"minerstarttime": "07-13-2019 09:25:23",
"hashcounter": 0,
"pooledtx": 2,
"chain": "main",
"biblepay-generate": true,
"poolinfo1": "",
"poolinfo2": "",
"poolinfo3": "",
"abninfo": "Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti-botnet transaction.; Unable to Create ABN: Sorry, your coin-age is too low to create an anti

Paste the full output of getnining info. Looks to me like it could not find your miner name and reverted you to solo mining or your use is not listed as funded. So grab a snapshot of your worker list also. That might be setup wromg

Yes, and I see a lot of windows10 users appear to not edit the correct biblepay.conf file.

Please navigate to:
%appdata%\biblepayevolution

Create the biblepay.conf there. Then look at it in DOS, and ensure its called "biblepay.conf" not "biblepay.conf.conf.txt" etc.

Happy mining!

im sure im on the right biblepay.conf... also looked it at DOS, it doest NOT have the .TXT extention.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: zupernovato on July 13, 2019, 05:27:20 PM

Quote from: bible_pay on July 13, 2019, 09:47:25 AM

Quote from: zupernovato on July 13, 2019, 09:44:50 AM

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

In case this answer was for me, I updated my post with more info just now. And yes, Im in windows 10.

Also, please check this out, and see Moving the Wallet section:
https://wiki.biblepay.org/Evolution_Upgrade

Somehow the remote console is stucked, and rejecting any connection that I try, so I won't have access till Monday. However, I assure you that I have followed the steps and that I am running evolution. Even the icons for mined BBPs are different (they are like birds). I am probably not using the last version that you posted here, but the last but one (the last mandatory). Should I do a 'biblepay-qt --erasechain' first of all? I have seen in reddit someone with the same problem as me, but that, after running that command, his BBPs, including the old mined ones in the BOINC era, went to zero (which does not make sense).

Ok, no problem and I wish you the best on recovering it all.
Technically, the last mandatory 1.4.0.1, is still "good enough" to use and mine on, but we had a GSC issue a couple weeks ago where we recommended everyone upgrade, and to erase the chain (just in case a node tried to go on the lower proto version sanc side).

So yes, if your node doesnt agree with https://chainz.cryptoid.info/bbp/ , please start with
./biblepay-qt -erasechain=1

And let it resync. Its a wives tail that you will lose all your BBP. That comes from the very true fact that if you start with 0 legal coins, and mine on a fork 100% of the time, all the BBP mined on the fork will be lost.

But during a resync, all official main-chain BBP is still in the wallet.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: Gilligan_M on July 13, 2019, 05:52:35 PM

Evening Rob!

I'd reply via email but I've been tied on time recently,

as per your request, I tested out funded ABN and non-funded, both of which work without hassle for me. Personally, I found that by reducing my hardware print down to 1 PC (with the most hashpower) I have stopped finding so many blocks and have started building ABN much better, mining without issue or random program closure.

Great work on it all so far, when / how should we expect to see the payout from funded ABN mining, to those with ABN supplying?

Awesome!

I "think" the crash is resolved that you had reported, so feel free to try the higher thread limit etc.

To find the funded miner payout ration, please click About in the pool and look for Funded Miner ABN fee. Its on a sliding dynamic scale now.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: dave_bbp on July 13, 2019, 05:57:44 PM

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

Although I wasn't mining a lot over the last couple of days, when I did my wallet never crashed afair. (Still running the exe in Win7 compatibility mode btw, not sure if this has any use).

Thanks, just to give you an update, while debugging the new funded ABN feature in 1.4.4.1, I did find a "sensitive area" that could have been the problem with windows 10 - and fixed it in 1.4.4.1h. So now if you would like to, you can try non lite mode and regular windows 10 mode to see if its resolved.

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

Although I wasn't mining a lot over the last couple of days, when I did my wallet never crashed afair. (Still running the exe in Win7 compatibility mode btw, not sure if this has any use).

Gilligan_M

newbie

Activity: 28

Merit: 0

Evening Rob!

I'd reply via email but I've been tied on time recently,

as per your request, I tested out funded ABN and non-funded, both of which work without hassle for me. Personally, I found that by reducing my hardware print down to 1 PC (with the most hashpower) I have stopped finding so many blocks and have started building ABN much better, mining without issue or random program closure.

Great work on it all so far, when / how should we expect to see the payout from funded ABN mining, to those with ABN supplying?

zupernovato

newbie

Activity: 35

Merit: 0

Quote from: bible_pay on July 13, 2019, 09:47:25 AM

Quote from: zupernovato on July 13, 2019, 09:44:50 AM

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

In case this answer was for me, I updated my post with more info just now. And yes, Im in windows 10.

Also, please check this out, and see Moving the Wallet section:
https://wiki.biblepay.org/Evolution_Upgrade

Somehow the remote console is stucked, and rejecting any connection that I try, so I won't have access till Monday. However, I assure you that I have followed the steps and that I am running evolution. Even the icons for mined BBPs are different (they are like birds). I am probably not using the last version that you posted here, but the last but one (the last mandatory). Should I do a 'biblepay-qt --erasechain' first of all? I have seen in reddit someone with the same problem as me, but that, after running that command, his BBPs, including the old mined ones in the BOINC era, went to zero (which does not make sense).

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: bible_pay on July 13, 2019, 10:45:53 AM

Quote from: Borgholio on July 12, 2019, 08:22:58 PM

Is it possible to use the funded ABN in the pool as a backup? Say if I have enough ABN for single block and I burn it, will I continue to mine with funded ABN? Thanks!

This feature is ready in beta.

Does anyone have a windows machine available to test dual abn/non-abn mining?

Ok, whoever wants to test this dual mining feature (this is where you set up two pool workerids, one without a funded ABN and one with a funded ABN, you enter both of these in your biblepay config file, and the wallet prefers to use your non-funded ABN as long as possible (until it runs out), then it switches to the funded ABN for a while). It does switch back to non-funded when your coin-age increases again.

Setup Guide:
https://wiki.biblepay.org/Quick_Start (Search for Dual Funded)

Download the windows version from:
www.biblepay.org

(We need to know this feature works before building a release for the public).

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: Borgholio on July 12, 2019, 08:22:58 PM

Is it possible to use the funded ABN in the pool as a backup? Say if I have enough ABN for single block and I burn it, will I continue to mine with funded ABN? Thanks!

This feature is ready in beta.

Does anyone have a windows machine available to test dual abn/non-abn mining?

zupernovato

newbie

Activity: 35

Merit: 0

Quote from: bible_pay on July 13, 2019, 09:45:34 AM

Quote from: zupernovato on July 13, 2019, 09:38:23 AM

Quote from: bible_pay on July 13, 2019, 09:16:30 AM

Yes, and I see a lot of windows10 users appear to not edit the correct biblepay.conf file.

Please navigate to:
%appdata%\biblepayevolution

Create the biblepay.conf there. Then look at it in DOS, and ensure its called "biblepay.conf" not "biblepay.conf.conf.txt" etc.

Happy mining!

Hello! Something weird is happeing on my side, after an update (I am not sure which one) I started to mine millions (which is impossible just with a laptop). I have checked now my wallet at: https://chainz.cryptoid.info/bbp/, and I am not mining there since 1st of June. But the worst is that I have two more movements 23rd of June and another one 24th of June of an average of MINUS 2500 BBPs each time. But going backwards shows to me that everything I mined, was taken out everytime I had more than a BBP (pluses followed by minus all the time).

I am in shocked, as I had even bought BBPs this summer, so I could start to contribute with PoS + mining + old BOINC system.

PD: I can see in the same webpage that all was moved to a 'Guesstimated Wallet', whatever that is, where my main address appears as the owner of that guess wallet. So perhaps not all is lost. But still I am mining millions without a reason. Perhaps I am in a forked wallet? How could that happend?

I need some guidance now.

First, have no fear that any BBP you bought or mined on the main chain is still there, as long as you have the wallet.dat file.

One step at a time, we will need to ensure you upgraded to Evolution. You should be on 1.4.4.0, what version do you have?

Note that Evo required us to move the wallet.dat file to the new location. You may still be mining in BiblePay Classic, which would explain how you solved so many blocks (diff is probably .0001) now.

Ok, thank you. I followed the upgrade steps, including a backup of wallet.dat (that I still keep it safe just in case of). It seems the remote acces has been cut now, as soon as it resets or I have physical access to the machine, I'll give you every detail you need. Thank you so much.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: zupernovato on July 13, 2019, 09:44:50 AM

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

In case this answer was for me, I updated my post with more info just now. And yes, Im in windows 10.

Also, please check this out, and see Moving the Wallet section:
https://wiki.biblepay.org/Evolution_Upgrade

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: zupernovato on July 13, 2019, 09:38:23 AM

Quote from: bible_pay on July 13, 2019, 09:16:30 AM

Yes, and I see a lot of windows10 users appear to not edit the correct biblepay.conf file.

Please navigate to:
%appdata%\biblepayevolution

Create the biblepay.conf there. Then look at it in DOS, and ensure its called "biblepay.conf" not "biblepay.conf.conf.txt" etc.

Happy mining!

Hello! Something weird is happeing on my side, after an update (I am not sure which one) I started to mine millions (which is impossible just with a laptop). I have checked now my wallet at: https://chainz.cryptoid.info/bbp/, and I am not mining there since 1st of June. But the worst is that I have two more movements 23rd of June and another one 24th of June of an average of MINUS 2500 BBPs each time. But going backwards shows to me that everything I mined, was taken out everytime I had more than a BBP (pluses followed by minus all the time).

I am in shocked, as I had even bought BBPs this summer, so I could start to contribute with PoS + mining + old BOINC system.

PD: I can see in the same webpage that all was moved to a 'Guesstimated Wallet', whatever that is, where my main address appears as the owner of that guess wallet. So perhaps not all is lost. But still I am mining millions without a reason. Perhaps I am in a forked wallet? How could that happend?

I need some guidance now.

First, have no fear that any BBP you bought or mined on the main chain is still there, as long as you have the wallet.dat file.

One step at a time, we will need to ensure you upgraded to Evolution. You should be on 1.4.4.0, what version do you have?

Note that Evo required us to move the wallet.dat file to the new location. You may still be mining in BiblePay Classic, which would explain how you solved so many blocks (diff is probably .0001) now.

zupernovato

newbie

Activity: 35

Merit: 0

Quote from: bible_pay on July 13, 2019, 09:43:15 AM

I remember Dave_BBP and Gilligan had a Windows10 mining crash issue, please let us know if the last release solved the problem.

In case this answer was for me, I updated my post with more info just now. And yes, Im in windows 10.

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 120. (Read 243386 times)