BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 793.

slovakia

full member

Activity: 770

Merit: 100

tiras right Wink

tiras

full member

Activity: 221

Merit: 100

Quote from: webster22 on December 17, 2017, 11:03:56 AM

Quote from: bible_pay on December 17, 2017, 10:47:44 AM

Quote from: webster22 on December 17, 2017, 10:45:08 AM

Rob -

I tried to withdraw some coins from pool overnight.
Got confirmation email and clicked on it.

But nothing coming. Are they lost due to the update?

Lets wait until the pool is on 1067 and synced, then we can look at the actual guid.

Nothing is lost in the blockchain, No, not lost, ever.

Only coins mined on a fork are lost. Or coins deposited to an exchange on a fork.

Oh this got my attention. How can you tell this? Concept of fungibility is designed in bitcoins. (1 bitcoin = Any other bitcoin). How can you tell what is fork vs no fork coin? How will exchange know?

I may be wrong but exchange should be on the same blockchain as you are . otherwise you TX will never be confirmed on their side .

webster22

newbie

Activity: 56

Merit: 0

Quote from: bible_pay on December 17, 2017, 10:47:44 AM

Quote from: webster22 on December 17, 2017, 10:45:08 AM

Rob -

I tried to withdraw some coins from pool overnight.
Got confirmation email and clicked on it.

But nothing coming. Are they lost due to the update?

Lets wait until the pool is on 1067 and synced, then we can look at the actual guid.

Nothing is lost in the blockchain, No, not lost, ever.

Only coins mined on a fork are lost. Or coins deposited to an exchange on a fork.

Oh this got my attention. How can you tell this? Concept of fungibility is designed in bitcoins. (1 bitcoin = Any other bitcoin). How can you tell what is fork vs no fork coin? How will exchange know?

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: webster22 on December 17, 2017, 10:45:08 AM

Rob -

I tried to withdraw some coins from pool overnight.
Got confirmation email and clicked on it.

But nothing coming. Are they lost due to the update?

Lets wait until the pool is on 1067 and synced, then we can look at the actual guid.

Nothing is lost in the blockchain, No, not lost, ever.

Only coins mined on a fork are lost. Or coins deposited to an exchange on a fork.

webster22

newbie

Activity: 56

Merit: 0

Rob -

I tried to withdraw some coins from pool overnight.
Got confirmation email and clicked on it.

But nothing coming. Are they lost due to the update?

togoshigekata

full member

Activity: 1260

Merit: 115

Quote from: bible_pay on December 17, 2017, 08:55:10 AM

BiblePay - 1.0.6.7
Mandatory Upgrade

- Disable tithe blocks at #21550
- Ensure Sanctuary payments can go live at #21551
- Increment mandatory protocol version to 70911
- Sanctuary payments went live at block #21551
- Superblocks start at block #30001
- Proposals and Budgets went live at block #21551

** This is the linux release. Please upgrade now and lets get the chain rolling on the right fork.

Windows will be available in 4 hours. **

Quote from: bible_pay on December 17, 2017, 09:08:53 AM

Oh unfortunately we need to update every single node in our system, the pool, the masternodes, everything

.

Quote from: tiras on December 17, 2017, 09:17:30 AM

it's asking to rebuild block DB after the update .

I deleted blocks,chainstate and database dirs and restarted the daemon but it still seems not syncing.

Quote from: slovakia on December 17, 2017, 09:26:55 AM

updated,rebuild,deled chains,block, .db without sync
next machine stuck on 21548 block with reindexing

Quote from: bible_pay on December 17, 2017, 10:28:24 AM

So after you upgrade your linux box, the last few blocks in the chain are bad because the tithe was paid at that height.

Go ahead and click OK to let it rebuild the block index.

Alex and I are working on this now to ensure we resync up to 21551. This upgrade only talks to other nodes of the same protocol version, hence the reason it is not going smoothly.

We are working it out now.

Please wait two more hours for the windows update.

Quote from: tiras on December 17, 2017, 10:32:00 AM

ROb , how long should it take to rebuild the block DB ?

I've been running it for more than an hour with no luck . stopped it .

can you post an IP of the node with a healthy rebuilt DB so we can force connection and resync ?

===============

For the block database issue, we just type in yes?

Do we need to run any of these commands?

Code:

rm blocks -R
rm chainstate -R

rm banlist.dat
rm fee_estimates.dat
rm governance.dat
rm mncache.dat
rm mnpayments.dat
rm netfulfilled.dat
rm peers.dat

./biblepayd -daemon -reindex

I tried the rm blocks and rm chainstate command and then a reindex and Im stuck at block 0 hehe

seeksilence1

newbie

Activity: 86

Merit: 0

I could not sync the blockchain. What step should I do? Just leave wallet and conf in the folder? Any change needs to be done to masternode.conf?

webster22

newbie

Activity: 56

Merit: 0

Morning everyone. Looks like another day of challenges. Keep at it Rob and team.

Question -

I am installing the latest (1.6.7). Are there any other things I must do. I am reading that blockchains must be rebuilt. Is this true for everyone?

Some can post all steps they took after install?

tiras

full member

Activity: 221

Merit: 100

Quote from: bible_pay on December 17, 2017, 10:28:24 AM

Quote from: 616westwarmoth on December 17, 2017, 09:26:25 AM

When looking at the masternode winners output from debug, it shows

Code:

"21551": "B547NvFM2TUeCKxEGcxCxpt8as42pyS4po:10",
  "21552": "BDkocGarpfSBMuT15p9dQzsAfNqsgb2UHh:10",
  "21553": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21554": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21555": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:10",
  "21556": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:9",
  "21557": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:9",
  "21558": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:10",
  "21559": "BCb8B85R4mpuiy62Sbs9W4Xv2w5CVEJ5TS:10",

Noticed block 21553 and 554 both went to the same payee, same with the 55/56 and 57/58. Only one MN in the list has each of these addresses. Am I misreading that, or is there something more to understand?

That should be OK if one controller has multiple masternodes; lets verify 100 payments after we get back up.

So after you upgrade your linux box, the last few blocks in the chain are bad because the tithe was paid at that height.

Go ahead and click OK to let it rebuild the block index.

Alex and I are working on this now to ensure we resync up to 21551. This upgrade only talks to other nodes of the same protocol version, hence the reason it is not going smoothly.

We are working it out now.

Please wait two more hours for the windows update.

ROb , how long should it take to rebuild the block DB ?

I've been running it for more than an hour with no luck . stopped it .

can you post an IP of the node with a healthy rebuilt DB so we can force connection and resync ?

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: 616westwarmoth on December 17, 2017, 09:26:25 AM

When looking at the masternode winners output from debug, it shows

Code:

"21551": "B547NvFM2TUeCKxEGcxCxpt8as42pyS4po:10",
  "21552": "BDkocGarpfSBMuT15p9dQzsAfNqsgb2UHh:10",
  "21553": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21554": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21555": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:10",
  "21556": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:9",
  "21557": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:9",
  "21558": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:10",
  "21559": "BCb8B85R4mpuiy62Sbs9W4Xv2w5CVEJ5TS:10",

Noticed block 21553 and 554 both went to the same payee, same with the 55/56 and 57/58. Only one MN in the list has each of these addresses. Am I misreading that, or is there something more to understand?

That should be OK if one controller has multiple masternodes; lets verify 100 payments after we get back up.

So after you upgrade your linux box, the last few blocks in the chain are bad because the tithe was paid at that height.

Go ahead and click OK to let it rebuild the block index.

Alex and I are working on this now to ensure we resync up to 21551. This upgrade only talks to other nodes of the same protocol version, hence the reason it is not going smoothly.

We are working it out now.

Please wait two more hours for the windows update.

noob101

newbie

Activity: 41

Merit: 0

Quote from: daemonko on December 17, 2017, 10:03:59 AM

guys, i'm loosing my patience here, two mandatory updates in one day, come on...

- now, i updated 6 machines to the latest version (1.0.6.7), starting biblepayd shows CPU 0.0%, biblepay-cli getmininginfo shows pool mining = false. wtf? any ideas what to do? please help. previous udpates worked ok. i'm on pool2.

- there is no windows version for 1.0.6.7? will it come out soon?

- and btw, withdrawing from minersofmen does not work (invalid account error...) any hints here? i tried to email them, got no response...

Hi there,

I know for big miners like you time=money, but please bear with us. I understand your frustration, and bible_pay(dev) and his team are working their rear ends off to solve these issues.

With regards to miners of men, the owners handle is nsummy. He is an independent who is kindly hosting a pool to assist the coin.

Again I apologize for any inconvenience. You have to agree though, it is not common to find a dev willing to submit solutions so quickly if a problem shows up.

All the best in your endeavors.

slovakia

full member

Activity: 770

Merit: 100

here is chat

https://discordapp.com/channels/348178609292443649/348178610324111362

tiras

full member

Activity: 221

Merit: 100

Quote from: crnewbie on December 17, 2017, 10:13:10 AM

Quote from: daemonko on December 17, 2017, 10:03:59 AM

guys, i'm loosing my patience here, two mandatory updates in one day, come on...

- now, i updated 6 machines to the latest version (1.0.6.7), starting biblepayd shows CPU 0.0%, biblepay-cli getmininginfo shows pool mining = false. wtf? any ideas what to do? please help. previous udpates worked ok. i'm on pool2.

- there is no windows version for 1.0.6.7? will it come out soon?

- and btw, withdrawing from minersofmen does not work (invalid account error...) any hints here? i tried to email them, got no response...

It seems that transition will not be that smooth. I think there are some more issues and who knows if pools are updated. I expect few more updates until things get fixed properly. I guess now we need to stay patient, pray and wait for further instructions from devs.

right, flaming in this thread won't help much.

crnewbie

newbie

Activity: 17

Merit: 0

Quote from: daemonko on December 17, 2017, 10:03:59 AM

guys, i'm loosing my patience here, two mandatory updates in one day, come on...

- now, i updated 6 machines to the latest version (1.0.6.7), starting biblepayd shows CPU 0.0%, biblepay-cli getmininginfo shows pool mining = false. wtf? any ideas what to do? please help. previous udpates worked ok. i'm on pool2.

- there is no windows version for 1.0.6.7? will it come out soon?

- and btw, withdrawing from minersofmen does not work (invalid account error...) any hints here? i tried to email them, got no response...

It seems that transition will not be that smooth. I think there are some more issues and who knows if pools are updated. I expect few more updates until things get fixed properly. I guess now we need to stay patient, pray and wait for further instructions from devs.

daemonko

newbie

Activity: 56

Merit: 0

guys, i'm loosing my patience here, two mandatory updates in one day, come on...

- now, i updated 6 machines to the latest version (1.0.6.7), starting biblepayd shows CPU 0.0%, biblepay-cli getmininginfo shows pool mining = false. wtf? any ideas what to do? please help. previous udpates worked ok. i'm on pool2.

- there is no windows version for 1.0.6.7? will it come out soon?

- and btw, withdrawing from minersofmen does not work (invalid account error...) any hints here? i tried to email them, got no response...

noob101

newbie

Activity: 41

Merit: 0

Hi guys,

Just a quick note. Please update the announcement on pool 2 to reflect correct block, seeing as we are past 21550 already.

Grin

Keep up the good work. Still rooting for you.

616westwarmoth

full member

Activity: 406

Merit: 101

Quote from: seeksilence1 on December 17, 2017, 09:45:24 AM

What's going on here. So many mandatory upgrades in one day without testing?!

Some things only come to light in the live environment. Masternodes were tested for months in testnet but this did not occur.

seeksilence1

newbie

Activity: 86

Merit: 0

What's going on here. So many mandatory upgrades in one day without testing?!

slovakia

full member

Activity: 770

Merit: 100

updated,rebuild,deled chains,block, .db without sync
next machine stuck on 21548 block with reindexing

Rob: whats next? you tested your update? cos it looks that didnt Angry

616westwarmoth you dont know how working MN: jump to dash forum and start to learn : yeah.... 207block/ numbers of MN=how many get MN every 24hours= this is your answer

616westwarmoth

full member

Activity: 406

Merit: 101

When looking at the masternode winners output from debug, it shows

Code:

"21551": "B547NvFM2TUeCKxEGcxCxpt8as42pyS4po:10",
  "21552": "BDkocGarpfSBMuT15p9dQzsAfNqsgb2UHh:10",
  "21553": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21554": "B5Ac1kfZd47aogmrHKzQM1SR65f2HidfJJ:9",
  "21555": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:10",
  "21556": "B8se8LxzDo9AKmSB9fnY38gbc3ubedRZxJ:9",
  "21557": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:9",
  "21558": "BSrFn8zpC48AykVANWcjVEve5tzn8NQNRE:10",
  "21559": "BCb8B85R4mpuiy62Sbs9W4Xv2w5CVEJ5TS:10",

Noticed block 21553 and 554 both went to the same payee, same with the 55/56 and 57/58. Only one MN in the list has each of these addresses. Am I misreading that, or is there something more to understand?

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 793. (Read 243376 times)