BIOS and mods for Sapphire RX 480 8gb Micron Memory - 0.25 ETH reward for help - page 2.

Vaas

newbie

Activity: 8

Merit: 0

Quote from: doktor83 on April 17, 2017, 12:22:29 AM

For all of you guys i made a custom bios from the one in the main post.
You won't need any wattool,wattman,afterbuner,trixx or any other software of that type, i set everything in the bios like Insider00 did with wattool, so :

Def gpu clock : 1144 Mhz
Def mem clock: 2150 Mhz

Mem straps 1625
VDDC (gpu voltage) set at 925mV
TDP 120w
Set fans to hold cards at about 70c, so you don't need fan regulation either

Before flashing remove ALL software that you used before for manipulating (wattool,wattman,afterbuner,trixx...).
Then clean all video drivers with DDU.
Flash bios.
Reboot, reinstall video drivers.

Test.

Enjoy Wink

http://www.filedropper.com/s480-8gb-micron

worked great but my 480 nitro still keeps the fan at 0% any insight in what might be happening? also the newest driver didn't recognize it, can the ATI pixel clock patcher solve this or not??

willi9974

legendary

Activity: 3500

Merit: 2792

Enjoy 500% bonus + 70 FS

Hello,

i have Sapphire RX 480 8GB Micron (NON PLUS)

It is better to copy the 1500 strap or a other one? what is the diffrent and what is the best bios mod for my card?

Update:
i have this night moded the bios and set Mem: 1160 Powerstage: 3 Memory: 2150 and get 29,4 mhs :-)

Link: http://1stminingrig.com/best-bios-rom-sapphire-nitro-rx-480-8gb-oc-micron-memory-30-mhs/

Regards
Willi

doktor83

hero member

Activity: 2548

Merit: 626

that is what you should do.

eviltapki

newbie

Activity: 1

Merit: 0

hey guys

First of all, thanks for the BIOS Doktor83.

I have a strange issue:

Doktor83's bios has the temp settings:

med temp - 45
high temp - 56
max temp - 73

And in MSI Afterburner i can see the max temp limit is 65. Of course after my cards reach 65c - reboot.

But the original bios:

med temp - 65,
high temp - 85
max temp - 109

AS for me, that is some kind of bug. Any suggestions ? Should i change the temp settings via POlaris and than flash the cards again?

Thanks!

carlosescuela

newbie

Activity: 3

Merit: 0

Quote from: cryptominer420 on March 26, 2017, 09:18:38 AM

Here are 3 bioses modded for you.
1625 Memory straps https://www.dropbox.com/s/qs3av04vv5e1skn/micron4802-1625%20Straps.rom?dl=0
1700 Memory straps https://www.dropbox.com/s/292axebpcc3pghb/micron4802-1750%20Straps.rom?dl=0
1500 Memory straps (may not work at all) https://www.dropbox.com/s/0x6767hd9idlnxm/micron4802-1500%20Straps%20May%20noy%20work%20under%20load.rom?dl=0

This is the usable Micron and elpida version of polaris bios editor https://www.dropbox.com/s/5r3z83yg15arymq/PolarisBiosEditor-micron-elpida.rar?dl=0

dude, download link dont work! Huh

doktor83

hero member

Activity: 2548

Merit: 626

Best is to modify your own bios, less chance to brick card.

dygus

legendary

Activity: 1193

Merit: 1000

Peaky Blinder

Quote from: doktor83 on May 08, 2017, 12:10:17 PM

Quote from: dygus on May 08, 2017, 08:47:33 AM

What's the difference between hynix and micron memory and how to check, which I have?

Different manufacturers.
You can see in gpu-z

Thank you. Now I know I have Micron. Which one BIOS is correct one to download and where can I download it?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: dygus on May 08, 2017, 08:47:33 AM

What's the difference between hynix and micron memory and how to check, which I have?

Different manufacturers.
You can see in gpu-z

dygus

legendary

Activity: 1193

Merit: 1000

Peaky Blinder

What's the difference between hynix and micron memory and how to check, which I have?

lazyboi

newbie

Activity: 10

Merit: 0

Quote from: doktor83 on May 04, 2017, 04:08:20 PM

Stay with wattool if you are happy with it

i've decided to get 5 more cards rx 470 8gb's since this is the cheapest card i can get in my country

suggestions accepted

doktor83

hero member

Activity: 2548

Merit: 626

Stay with wattool if you are happy with it

lazyboi

newbie

Activity: 10

Merit: 0

Quote from: doktor83 on April 17, 2017, 12:22:29 AM

For all of you guys i made a custom bios from the one in the main post.
You won't need any wattool,wattman,afterbuner,trixx or any other software of that type, i set everything in the bios like Insider00 did with wattool, so :

Def gpu clock : 1144 Mhz
Def mem clock: 2150 Mhz

Mem straps 1625
VDDC (gpu voltage) set at 925mV
TDP 120w
Set fans to hold cards at about 70c, so you don't need fan regulation either

Before flashing remove ALL software that you used before for manipulating (wattool,wattman,afterbuner,trixx...).
Then clean all video drivers with DDU.
Flash bios.
Reboot, reinstall video drivers.

Test.

Enjoy Wink

http://www.filedropper.com/s480-8gb-micron

_______________________________________________________________________________ ______________________________________
_______________________________________________________________________________ ______________________________________

hey DOk

what if i brick my card ?
can it be fixed by just restoring the old rom ?

card = Sapphire RX 480 8GB NON PLUS MICRON

btw my current settings are in this link

https://lazyboi-1.tumblr.com/image/160311333430

getting 24-25 in dual mining and in single mining getting 26 mh stable without BIOS MOD

almirfiorio

sr. member

Activity: 312

Merit: 250

Dear Densets

im can use in Sapphire RX480 Nitro 4GB with elpida memory (not Nitro+) ?

Thanks
Almir

Quote from: densets on April 18, 2017, 12:38:38 PM

Quote from: cryptominer420 on March 26, 2017, 09:18:38 AM

Here are 3 bioses modded for you.
1625 Memory straps https://www.dropbox.com/s/qs3av04vv5e1skn/micron4802-1625%20Straps.rom?dl=0
1700 Memory straps https://www.dropbox.com/s/292axebpcc3pghb/micron4802-1750%20Straps.rom?dl=0
1500 Memory straps (may not work at all) https://www.dropbox.com/s/0x6767hd9idlnxm/micron4802-1500%20Straps%20May%20noy%20work%20under%20load.rom?dl=0

This is the usable Micron and elpida version of polaris bios editor https://www.dropbox.com/s/5r3z83yg15arymq/PolarisBiosEditor-micron-elpida.rar?dl=0

can yo reupload this?

almirfiorio

sr. member

Activity: 312

Merit: 250

Quote from: doktor83 on April 17, 2017, 12:22:29 AM

For all of you guys i made a custom bios from the one in the main post.
You won't need any wattool,wattman,afterbuner,trixx or any other software of that type, i set everything in the bios like Insider00 did with wattool, so :

Def gpu clock : 1144 Mhz
Def mem clock: 2150 Mhz

Mem straps 1625
VDDC (gpu voltage) set at 925mV
TDP 120w
Set fans to hold cards at about 70c, so you don't need fan regulation either

Before flashing remove ALL software that you used before for manipulating (wattool,wattman,afterbuner,trixx...).
Then clean all video drivers with DDU.
Flash bios. Reboot, reinstall video drivers.
http://www.filedropper.com/s480-8gb-micron

Dear Doktor83

Im have Sapphire RX 480 Nitro (not Nitro+) with elpida memory . and my card have 4gb

you can help me how im can modify bios tor reach 30mh/s?

What values im need to change???

See my bios picture in polaris

Thanks
Almir

GPUM1ner

newbie

Activity: 39

Merit: 0

Quote from: amfofo on May 01, 2017, 10:19:23 AM

Quote from: GPUM1ner on May 01, 2017, 01:29:05 AM

Thanks doktor83!

Your rom allowed 4x Sapphire Nitro 480 8GB reach 29.3MH/s (Micron).

I tweaked the settings a bit, but I mostly needed the straps as PBE wouldn't work.

1100 GPU/1000 mV
2050 Memory/1000 mV

Fan minimum 50% makes them run smooth.

I can't confirm his rom is best, but at least the straps are changed. What strap mod did you perform?

how lucky you are
i got artifacts on doctor83's bios

I think Micron might be hit or miss maybe?
If it is of any use, the ASIC qualities in GPU-Z are 70.4%, 68.7%, 68.3%, 79.5%.

Has been running stable 29.3MH/s for 3 days now. Lets see if it crashes eventually.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: w0lf0. on May 01, 2017, 03:58:06 PM

Hi guys any help for msi 470 4gb with hynix memory?

stock bios only 20.5 mh/s
modded bios with 1500 straps 23.2 mh/s

anyone have good bios for this type of card?

Thanks

cool the vrm and vram and you will get to 24.5mhs Cheesy

w0lf0.

hero member

Activity: 1050

Merit: 513

Hi guys any help for msi 470 4gb with hynix memory?

stock bios only 20.5 mh/s
modded bios with 1500 straps 23.2 mh/s

anyone have good bios for this type of card?

Thanks

amfofo

newbie

Activity: 46

Merit: 0

Quote from: GPUM1ner on May 01, 2017, 01:29:05 AM

Thanks doktor83!

Your rom allowed 4x Sapphire Nitro 480 8GB reach 29.3MH/s (Micron).

I tweaked the settings a bit, but I mostly needed the straps as PBE wouldn't work.

1100 GPU/1000 mV
2050 Memory/1000 mV

Fan minimum 50% makes them run smooth.

I can't confirm his rom is best, but at least the straps are changed. What strap mod did you perform?

how lucky you are
i got artifacts on doctor83's bios

GPUM1ner

newbie

Activity: 39

Merit: 0

Thanks doktor83!

Your rom allowed 4x Sapphire Nitro 480 8GB reach 29.3MH/s (Micron).

I tweaked the settings a bit, but I mostly needed the straps as PBE wouldn't work.

1100 GPU/1000 mV
2050 Memory/1000 mV

Fan minimum 50% makes them run smooth.

I can't confirm his rom is best, but at least the straps are changed. What strap mod did you perform?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Zorg33 on March 29, 2017, 06:58:21 PM

No, it 's a obvious sign of too much OC.
Hynix won't be stable over 1950 MHz with the common timkng straps.
Even with custom straps you are lucky if you can go over 2000 Mhz.
1950Mhz with 1500 timing should bring you about 28 mh/s.

yeah my hynix 480 and 470 cards i just used 1900-1925 some even as low as 1850 just to keep them stable

my feeling is 1 or 2mhs more hash is not worth me rebooting a rgig once everyday

Topic: BIOS and mods for Sapphire RX 480 8gb Micron Memory - 0.25 ETH reward for help - page 2. (Read 22180 times)