I have posted my tire pressure gauge listing again but I have yet to see it appear in the market, I sent it using bitmessage. Actually I dont see any items currently in the market. Also if I want a custom contract to appear on the market do I need to fill in the "Send Contract to" field? If i dont fill it in it doesnt seem to try to send to the market. The only way I can get my listing to appear in the market is if I put in an address in the "Send Contract to" field.
My listing is now on the market but I had to search for it to get it to appear
Thanks
Topic: BitBay OFFICIAL BITBAY Thread Smart Contracts Decentralized Markets Rolling Peg - page 330. (Read 542094 times)
March 25, 2015, 06:39:55 PM
March 25, 2015, 06:26:51 PM
I tried to create a wallet/address, first time when I installed the software and now from File menu. I named two key files and tried to save them to a different directories, but the files did not appear and the address was not created. Some time ago I tried it with the qt wallet and had the same result, no files and no address. I'm using windows 7.
Did you install to somewhere where you have no write access? Or are you trying to save keys to certain directories without write access? I saw this issue before with my friends computer. It wasnt allowed to save to certain directories! Go ahead and see where you can write to. Also, make sure it has admin privelages.
March 25, 2015, 04:48:24 PM
As always have a lot of threads in the market.which better thanothers and trustful will be forward... 
March 25, 2015, 04:29:37 PM
How cute. David has a stalker.
March 25, 2015, 04:06:51 PM
I loaded the client at still can't get markets to load. Can someone explain how to get this to work. Pretend I am 5 years old.
Ok sure. First of all, it works on Bitmessage. You are a node in the network. Everyone will pass messages around to their neighbors and eventually the message will get to you. If you can decrypt it, its for you. No servers needed to run this.
However, it may take time the first time you connect to the markets. And after two days, orders are forgotten by the nodes. However, a node can of course send the order again as a reminder to new people once it leaves the market.
So first of all, take some time to let the nodes find each other. You have a list of nodes and messages will eventually need to find you. However, once the full list of peers is obtained, things start working very fast.
So first, you should check and see if you have a good connection in the receive tab. If you see about 8 or more connections you are good. Next, let it find all the nodes. Sometimes that is very fast and sometimes not. Lastly, go ahead and test sending to the market. If your network is running properly anything you send to the market will show in the market tab.
I will send some orders to the market to fill it up a bit. If you want more assistance, please PM me and would be happy to help.
March 25, 2015, 04:01:05 PM
I tried to create a wallet/address, first time when I installed the software and now from File menu. I named two key files and tried to save them to a different directories, but the files did not appear and the address was not created. Some time ago I tried it with the qt wallet and had the same result, no files and no address. I'm using windows 7.
March 25, 2015, 03:25:13 PM
how long does it take for contracts to come up?. I set up a contract but have yet to see it on the market
March 25, 2015, 03:12:18 PM
I apologize for the false alarm. I misunderstood it
SorryPleas Gizfreak removed post
March 25, 2015, 01:15:51 PM
I loaded the client at still can't get markets to load. Can someone explain how to get this to work. Pretend I am 5 years old.
March 25, 2015, 01:03:23 PM
The new QT on Mac works perfectly fine, however the client for Mac crashes every time during Setup Wizard.
I'm on OS X Yosemite. Anybody experiencing the same issue?
I'm on OS X Yosemite. Anybody experiencing the same issue?
the same...
(mac os x 10.10.1)Please note that the Market Client is out on it's first public beta test, the idea being that we can get all of your feedback and fix any problems to produce a perfectly working client.
This is the reason we are releasing stable QT wallets, so you can stake and send/receive with them while we develop and test the full client.
The beta Market Client will go through many changes before we release a final stable version, so as always with beta software, use with caution and expect some turbulence, especially in the early days.
The BitBay client works fine its only calling the daemons as a subprocess. Bitbayd and Blackcoind. Getting a static build that is good for commercial release.
For example we were told getting a linux build for all versions of linux in one client is not practical because of libraries for certain computers being different. Our windows build works on 100% of the systems currently. The others working on more than 90% (according to reports vs download counter)
Still though, reports are very important. The reason for public release was because we need more Macs to test on.
March 25, 2015, 12:57:23 PM
I apologize for the false alarm. I misunderstood it
SorryPleas Gizfreak removed post
March 25, 2015, 12:38:54 PM
The new QT on Mac works perfectly fine, however the client for Mac crashes every time during Setup Wizard.
I'm on OS X Yosemite. Anybody experiencing the same issue?
I'm on OS X Yosemite. Anybody experiencing the same issue?
the same...
(mac os x 10.10.1)Please note that the Market Client is out on it's first public beta test, the idea being that we can get all of your feedback and fix any problems to produce a perfectly working client.
This is the reason we are releasing stable QT wallets, so you can stake and send/receive with them while we develop and test the full client.
The beta Market Client will go through many changes before we release a final stable version, so as always with beta software, use with caution and expect some turbulence, especially in the early days.
March 25, 2015, 11:53:04 AM
The new QT on Mac works perfectly fine, however the client for Mac crashes every time during Setup Wizard.
I'm on OS X Yosemite. Anybody experiencing the same issue?
I'm on OS X Yosemite. Anybody experiencing the same issue?
the same...
(mac os x 10.10.1) March 25, 2015, 11:45:27 AM
I see a few things i havent done yet such as the email so let me try a few of the things mentioned and then we can try troubleshooting if it doesnt work.
yep no dice got an email attached and it says bitmessage has 8 network connections. went as far as checking my firewall and set bitbay and bit halo to super trusted in the settings and still the market does nothing. sadly ive got things to do so maybe someone can help me troubleshoot later.
yep no dice got an email attached and it says bitmessage has 8 network connections. went as far as checking my firewall and set bitbay and bit halo to super trusted in the settings and still the market does nothing. sadly ive got things to do so maybe someone can help me troubleshoot later.
You might want to try posting an order to the market and see if you end up seeing your own order. Make it for like 1 bitbay. Also, everyone in the markets should see that as well.
Another thing we can try is that I send an offer to you directly to your bitmessage address. We will see if it sees incoming messages. Perhaps your peers didnt find ours. So far, i have only see this issue once and it was with my build on my computer at a second location. I was unable to see messages that my other setup saw. But it later found peers and fixed itself. I will definitely look into hard coding some peers for the network thats arent native bitmessage nodes.
In the future, i can run all the nodes through a server and have all client pull that list for instant connection.
March 25, 2015, 10:34:36 AM
I see a few things i havent done yet such as the email so let me try a few of the things mentioned and then we can try troubleshooting if it doesnt work.
yep no dice got an email attached and it says bitmessage has 8 network connections. went as far as checking my firewall and set bitbay and bit halo to super trusted in the settings and still the market does nothing. sadly ive got things to do so maybe someone can help me troubleshoot later.
yep no dice got an email attached and it says bitmessage has 8 network connections. went as far as checking my firewall and set bitbay and bit halo to super trusted in the settings and still the market does nothing. sadly ive got things to do so maybe someone can help me troubleshoot later.
March 25, 2015, 10:30:13 AM
Ok been running the market wallet for over a day and have tried searching the market and nothing shows at all...Ive asked once before what i may be doing wrong and didn't get an answer or even a suggestion.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
Hey there, if you see how many times i post here obviously im more than happy to help you out even personally. Ok so your market isnt populating. I'm wondering if bitmessage wasnt getting a good connection or perhaps has a firewall issue? Im thinking the best way may be to give you a custom bitmessage client that you can run so we can look inside it and see whats going on.
Also, try to double check that your bitmessage address is loaded. Even in Bitbay, it will tell you how many connections you had. Sorry if i overlooked your comment. I get amazingly busy.
I'm more than happy to walk you through it on IRC, Skype or email. PM me so we can get you started.
To improve Bitmessage, im very soon going to be having a superior seeding system to speed things up.
March 25, 2015, 10:27:56 AM
Ok been running the market wallet for over a day and have tried searching the market and nothing shows at all...Ive asked once before what i may be doing wrong and didn't get an answer or even a suggestion.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
Please understand that this is new to everyone. Some questions can be answered by a few of us, but some must be answered by David. He is busy coding, and can not be on this forum 24/7.
What os are you using? Is your client synced? Have you been able to set up your email in the client? Got the test mail? Bitmessage enabled?
March 25, 2015, 10:02:25 AM
Ok been running the market wallet for over a day and have tried searching the market and nothing shows at all...Ive asked once before what i may be doing wrong and didn't get an answer or even a suggestion.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
So am i to assume this is how new people on the scene are going to be treated, because Ive seen others post here and get answers and Ive posted here even in the past and so far have never received an answer to ANY of my questions.
Please someone explain why the market never populates for anything at all with my client.
March 25, 2015, 09:44:54 AM
On Windows 8 I get a "bitpayd failed to load" message. I have tried running as Administrator and no luck. Ideas?
you're not running bitbayd.exe already in the background? because that happens when you try to run the QT wallet and client simultaneously or the bitbaydaemon already running. Jump to: