Topic: Bitcoin Core won't take my passphrase (Read 4188 times)

Send it over, ill give it a try.

Responded to you in the pywallet thread over here.

I have the same problem, is there any solution ?

Here are my two posts with my issue

First time i thought the problem is connected to Armory , but now i do not know
https://bitcointalksearch.org/topic/m.9263763


https://bitcointalksearch.org/topic/m.9271649    Re: Pywallet 2.2: manage your wallet [Update required]

It's possible that your keyboard layout has changed from US to UK or US international. Try using one of these instead of the tilda:

`
¬
#
"
'

You have a classic setup to get bitten by http://en.wikipedia.org/wiki/Dead_key issue. This is especially easy on Windows which keeps the keyboard layout state per thread/window. So many people are unaware that when the new window pops up the keyboard layout may have been temporarily changed for the duration of this new window being open. In all cases like this that I've personally assisted it was always caused by careless change in keyboard layout, keyboard driver, physical keyboard or the way the key presses are transmitted through the various "remote desktop" tools.

Like, are you positive that nobody in your household had recently started learning e.g. Spanish or stopped learning German?

Well, although I'm kinda happy (sorry) that something weird and mysterious isn't going on, I'm unhappy that this could make things more difficult for you...

On the (small) plus side, you already have JtR compiled, so if you'd like to use it to search for your password, it's a great option.

btcrecover is faster if you have a discrete video card, in terms of guesses per second (and JtR is faster if you don't have one). I also think that btcrecover is the easier option if you already have a good idea of what your password is, but I'm just a teensy bit biased (I'm the author of btcrecover)....

If you do choose to try btcrecover, the tutorial and quick start is here: https://github.com/gurnec/btcrecover/blob/master/TUTORIAL.md#btcrecover-tutorial

Let me know if you have any questions.

Ok...so I wasn't reading the output of JtR correctly. I purposely added a dummy password to the script I used to come up with the wordlist and that's when I realized I come close enough. So I'm back to that stage on trying to remember what I based my password on...grrrrrr

I still need to try that. I did do it but it may not be a proper test as the machine I put it on had it at one point. I do have a clean laptop I can put it but I haven't had a chance yet.

As for pywallet --dump, I can also try that a bit later.

I guess 0.9.0 didn't work either.

Can you dump your wallet with pywallet?

I'll give that python command a go at lunch time.

This was the command I used in Debian to get JtR:
git clone -b bleeding-jumbo git://github.com/magnumripper/JohnTheRipper JohnTheRipper

I have multiple copies of the wallet.dat. All are recent as I didn't want to mess with the original file other attempting to unlock it. What I don't have is an older version sitting around (wish I did).

This is mysterious....

First, a little background (if you're interested, if not just skip to the questions):

Bitcoin Core makes two checks when validating your password.

A. Run the password through a key derivation function (PBKDF1-SHA512) to generate a derived_key.
B. Use the derived_key to decrypt (with AES256) the 48-byte long encrypted_mkey (from the wallet) into a decrypted_mkey.
C. Check (1): make sure the decrypted_mkey is exactly 32 bytes long plus 16 valid padding bytes at the end.
D. Use the decrypted_mkey to decrypt a single (arbitrary) encrypted_privkey (from the wallet) into a decrypted_privkey.
E. Mathematically derive from the decrypted_privkey a derived_pubkey.
F. Check (2): make sure the derived_pubkey is equal to the pubkey stored in the wallet file.

JtR doesn't bother with check (2) in the interest of speed. This should be OK, because the likelihood that check (1) passes, but check (2) fails should be extremely small (something like 1 in 2^128).

pywallet doesn't bother with check (1) (in other words, it always "accepts" the password at first), it simply truncates the decrypted_mkey to 32 bytes in length and ignores any padding (even when the padding is invalid). It only uses check(2) (running that check against every encrypted_privkey if you answer "y" to that question it asked).

If JtR thinks you have the right password, but pywallet and Bitcoin Core disagree... than I'm not sure what's going on.

So... questions...

Could you try btcrecover (another Python script)? (use "--passwordlist --wallet wallet.dat" for its options.) It should use the same single check as JtR.

Where did you get your JtR? If you compiled it from source, how recent is it (there were some recent Bitcoin-related updates to JtR)?

Do you have any wallet.dat backups (even if they're encrypted)?

This is what I'm getting:

To me it seems like it's accepting the password but the private keys won't take them. Or am I reading this wrong??

The size option is there mostly for hard drive scans. For a wallet, just choose a size that's larger than the wallet size.

You need to append a (strange) unit to the end of the size, so for example --recov_size=100Mo means 100 megaoctets.

(Be sure to take a backup of the wallet file before running pywallet on it, just in case)

So I'm looking at the command pywallet.py --recover and it looks like it requires a size option be set. How do you what number to put in there? The rest of the command, seems easy enough.

No. Capital and lower case letters, numbers and the tilde key. I wasn't sure if the tilde was the issue but I was able to encrypt a blank wallet and then successfully change the password.

I'll try the pywallet thing later. Right now I'm up against washing machine and a bearing that doesn't want to be replaced!

This means that JtR was able to decrypt the mkey (and verify that the padding bytes were correct, which makes it extremely likely that the password was correct). JtR doesn't try to actually decrypt any private keys to check them against the stored public keys.

If the first private key, or its associated public key, is corrupted, this will happen (although that seems unlikely to me...). If this is the case, `pywallet.py --recover` can help.

CDNinATL, can you let us know how this turns out? I'm personally interested...

Also, does your password contain any non-ASCII characters (any characters not list here: https://en.wikipedia.org/wiki/ASCII#ASCII_printable_code_chart)?

I can. I'll give it a go on my main computer.

Can you install 0.9.0 on another system again and see if it works?

I ran bitcoin2john.py command that came with John the Ripper.

There is no hashed password stored in the wallet to extract. What exactly did you do?