Bitminter client (Windows/Linux/Mac) - page 27.

ewibit

legendary

Activity: 2955

Merit: 1049

Quote from: DrHaribo on August 25, 2013, 06:40:31 AM

Go to "settings" -> "options..." in the menu. On the left side where it says "when new devices connect" make sure you set it to "always start device". This will automatically start mining on devices that are detected. Then go under the "devices" tab in the same window. Make sure "rescan for added/removed devices" is on. Set the rescan interval as you please.

Now it should automatically re-discover any ASICs that disconnect and start mining on them again.

thx, exactly so I had it configured (rescan is @default @10s), but last 10h LS was not discovered...

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

BitMinter client version 1.4.1 is out.

This is just a small bugfix release to make the client run with the new firmware used in BFL ASIC singles and minirigs.

Changes from 1.4.0 to 1.4.1:

Fix incompatibility with new BFL ASIC firmware

Try it out:

If you have issues with 1.4.1 then you can still get the previous release (1.4.0) at https://bitminter.com/client/1.4.0/bitminter.jnlp

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: ewibit on August 25, 2013, 06:32:05 AM

last night the BFL LS was away again; - in the morning when I came I have done
"probe all ports for external devices"
and BFL LS was here again
therefore it will be a good feature in the menu
Perform scheduled actions
to do "probe all ports for external devices"
~ all 2 hours
TIA

Go to "settings" -> "options..." in the menu. On the left side where it says "when new devices connect" make sure you set it to "always start device". This will automatically start mining on devices that are detected. Then go under the "devices" tab in the same window. Make sure "rescan for added/removed devices" is on. Set the rescan interval as you please.

Now it should automatically re-discover any ASICs that disconnect and start mining on them again.

ewibit

legendary

Activity: 2955

Merit: 1049

last night the BFL LS was away again; - in the morning when I came I have done
"probe all ports for external devices"
and BFL LS was here again
therefore it will be a good feature in the menu
Perform scheduled actions
to do "probe all ports for external devices"
~ all 2 hours
TIA

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: ewibit on August 24, 2013, 03:33:57 PM

perhaps this will tell you something, because you know the difference of the versions:
with v. 1.4.0 the BFL LS does nothing; - only errors

Yes, the beta has 2 bugfixes to work on BFL ASIC singles and minirigs.

ewibit

legendary

Activity: 2955

Merit: 1049

perhaps this will tell you something, because you know the difference of the versions:
with v. 1.4.0 the BFL LS does nothing; - only errors

Code:

2013.08.24 [22:30] BitFORCE (ttyUSB6) ERROR: Unexpected response to work results poll command: 7263D42502FF3564936F793A8A4EFBE44AA37627B96C0B48D117F6F3837EF0C4,F52D848A521917BC19415257,3,0
2013.08.24 [22:30] BitFORCE (ttyUSB6) ERROR: Unexpected response to queue job pack command: 7263D42502FF3564936F793A8A4EFBE44AA37627B96C0B48D117F6F3837EF0C4,F52D848A521917BD19415257,2,2,41B5ACB6,7BA5BD9B
2013.08.24 [22:30] BitFORCE (ttyUSB6) ERROR: Unexpected response to work results poll command: 7263D42502FF3564936F793A8A4EFBE44AA37627B96C0B48D117F6F3837EF0C4,F52D848A521917BE19415257,5,2,681FBEFD,A6F2A3DC
2013.08.24 [22:30] BitFORCE (ttyUSB6) ERROR: Unexpected response to queue job pack command: OK
2013.08.24 [22:30] BitFORCE (ttyUSB6) ERROR: Unexpected response to work results poll command: 7263D42502FF3564936F793A8A4EFBE44AA37627B96C0B48D117F6F3837EF0C4,F52D

all other devices are working...

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: ewibit on August 24, 2013, 02:34:21 PM

I have tried different USB ports and now BFL LS on a Anker USB 3.0 Hub -> same errors
only resolving is if I kill client and start new Huh

1.4.1Beta2

Looks pretty much the same as other USB failures. But I don't get why restarting the client fixes it. It closes the port after timing out while probing the port. Are you sure it's not just taking a short break that fixes it?

ewibit

legendary

Activity: 2955

Merit: 1049

around every ~2 hours I have BFL LS errors

Code:

2013.08.24 [20:48] FPGA device detected on ttyUSB11: Icarus
2013.08.24 [20:48] ASIC device detected on ttyUSB6: BitFORCE SC 1.0
2013.08.24 [20:48] Icarus (ttyUSB10): Tuning timers.
2013.08.24 [20:48] Icarus (ttyUSB11): Tuning timers.
2013.08.24 [20:50] Work rejected. Server says: Stale proof of work
2013.08.24 [20:51] Work rejected. Server says: Stale proof of work
2013.08.24 [21:14] BitFORCE (ttyUSB6) ERROR: Unexpected response to work results poll command: C5A29
2013.08.24 [21:14] BitFORCE (ttyUSB6) ERROR: Unexpected response to queue job pack command: OK
2013.08.24 [21:14] BitFORCE (ttyUSB6) ERROR: Unexpected response to work results poll command: OK:QUEUED 4
2013.08.24 [21:25] BitFORCE (ttyUSB6) ERROR: Disconnected while working
2013.08.24 [21:25] Cannot write to ttyUSB6: device disconnected (output stream gone)
2013.08.24 [21:25] Probe of port ttyUSB6 failed: timeout
2013.08.24 [21:26] Cannot write to ttyUSB6: device disconnected (output stream gone)
2013.08.24 [21:27] Cannot write to ttyUSB6: device disconnected (output stream gone)
2013.08.24 [21:27] Cannot write to ttyUSB6: device disconnected (output stream gone)
2013.08.24 [21:27] Probe of port ttyUSB6 failed: timeout

the Jalapeno and Eruptors are working though
I have tried different USB ports and now BFL LS on a Anker USB 3.0 Hub -> same errors
only resolving is if I kill client and start new Huh

1.4.1Beta2

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: ThatFatGuy on August 24, 2013, 12:25:57 AM

Hey what is happening when everything stops showing computation rates on the website and my miner runs out of work? It happened night before last for about 4 hours but when i rebooted it started right up. Should I fear reboot? Will it keep me from receiving coins? Thanks. Shocked

There was a networking problem at the server for a moment, but it was luckily short.

ThatFatGuy

newbie

Activity: 38

Merit: 0

Hey what is happening when everything stops showing computation rates on the website and my miner runs out of work? It happened night before last for about 4 hours but when i rebooted it started right up. Should I fear reboot? Will it keep me from receiving coins? Thanks. Shocked

SgtSpike

legendary

Activity: 1400

Merit: 1005

I've not touched the beta client since first running it, and it's been rock solid thus far.

ThatFatGuy

newbie

Activity: 38

Merit: 0

Hey Dr. Haribo,
the BitMinter beta client and web page works great with my BFL 60 GHs.

Better than any other client/website combo.

You had the drivers and recognition for my tiny .333 miners when i just started, now I have a big dog, but I am sticking with the pool that got me off the ground when I was a newbie!

Thanks so much, I feel many of the clients are behind in the basic useful functionality for the small miner.

ThatFatGuy

doubleganger

newbie

Activity: 12

Merit: 0

Is it possible to turn off the security warning that pops up every time I start the client either from the desktop or the command line that warns that the application has requested permission to create a desktop launcher. There is a check box to always allow but it's greyed out. Any ideas as this is pretty annoying? Otherwise everything is working great.

vaio127

newbie

Activity: 28

Merit: 0

The newest version works great! Very nicely done

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Yeah it looks like you have some USB issues. Maybe one of those USB hubs that "sometimes work" ?

ewibit

legendary

Activity: 2955

Merit: 1049

now with the new beta:

Code:

2013.08.23 [13:45] Icarus (ttyUSB8): Not getting any results. Retuning timers.
2013.08.23 [13:45] Icarus (ttyUSB8): Command response 6 ms, hash rate 336,0 Mhps.
2013.08.23 [14:12] Work rejected. Server says: Stale proof of work
2013.08.23 [14:12] Work rejected. Server says: Stale proof of work
2013.08.23 [14:28] Work rejected. Server says: Stale proof of work
2013.08.23 [14:29] Work rejected. Server says: Stale proof of work
2013.08.23 [15:10] Work rejected. Server says: Stale proof of work
2013.08.23 [15:23] Work rejected. Server says: Stale proof of work
2013.08.23 [15:23] Work rejected. Server says: Stale proof of work
2013.08.23 [15:27] Work rejected. Server says: Stale proof of work
2013.08.23 [15:27] Work rejected. Server says: Stale proof of work
2013.08.23 [15:28] BitFORCE (ttyUSB12) ERROR: Disconnected while working
2013.08.23 [15:28] Cannot write to ttyUSB0: device disconnected (output stream gone)
2013.08.23 [15:28] Cannot write to ttyUSB0: device disconnected (output stream gone)
2013.08.23 [15:28] Probe of port ttyUSB0 failed: timeout

ewibit

legendary

Activity: 2955

Merit: 1049

Quote from: DrHaribo on August 22, 2013, 10:10:42 AM

BitMinter client v1.4.1beta2 is ready for testing.

New:

Fixed unstable hashrate on BFL ASIC singles and minirigs

Please check it out:

Let me know how it runs, especially on singles and minirigs.

I test it now and the last hour it seems ok; - because the old version had troubles with BFL LS and with BFGminer I have the same troubles, - always got sick after an hour
seems to be a USB driver problem (Ubuntu)

I hope this version will run without getting sick
and secondary
the most important feature will be to add a backup pool (if bitminter is down again)
TIA

SgtSpike

legendary

Activity: 1400

Merit: 1005

Quote from: DrHaribo on August 22, 2013, 10:10:42 AM

BitMinter client v1.4.1beta2 is ready for testing.

New:

Fixed unstable hashrate on BFL ASIC singles and minirigs

Please check it out:

Let me know how it runs, especially on singles and minirigs.

It appears to be working great for mine! I'll run it for a while and let you know if I run into any issues with it.

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

BitMinter client v1.4.1beta2 is ready for testing.

New:

Fixed unstable hashrate on BFL ASIC singles and minirigs

Please check it out:

Let me know how it runs, especially on singles and minirigs.

ziggysisland

newbie

Activity: 4

Merit: 0

Down again!! this bites!!

Topic: Bitminter client (Windows/Linux/Mac) - page 27. (Read 654946 times)