anything new about bitstamp frontend?
fix is ready, i'm testing it.
I think i'll be able to send C.A.T. 2.4 In the next 3 days
Topic: 【BOT】 🌟 C.A.T. Cryptocurrency Automatic Trader 🌟 (New Price List 04/2021) - page 236. (Read 531556 times)
November 09, 2014, 02:18:49 PM
fix is ready, i'm testing it.
I think i'll be able to send C.A.T. 2.4 In the next 3 days
November 09, 2014, 02:00:32 PM
Sorry about that but C.A.T. couldn't be killed for the log you post, in that log there are only 2 divide by zero exception :
this is only the Market Table, there's a Divide By Zero on the Volume Calculation, but nothing to do with a Java Virtual Machine Crash.
first i suggest you to save your Ping-Pong option in the XML File, so if C.A.T. crash you'll be able to load them without any problem.
Then i suggest you to make a check of you java installation, because this is not a C.A.T. problem but a Java Virtual Machine Problem.
Quote
at CAT.zMarketClass.SingleMarket.getCurrentVolumeBTC(SingleMarket.java:248)
at CAT.mainPanel.JPanelMarketsCurrency.addRow(JPanelMarketsCurrency.java:116)
at CAT.mainPanel.JPanelMarketsCurrency.addRow(JPanelMarketsCurrency.java:116)
this is only the Market Table, there's a Divide By Zero on the Volume Calculation, but nothing to do with a Java Virtual Machine Crash.
first i suggest you to save your Ping-Pong option in the XML File, so if C.A.T. crash you'll be able to load them without any problem.
Then i suggest you to make a check of you java installation, because this is not a C.A.T. problem but a Java Virtual Machine Problem.
November 09, 2014, 01:55:08 PM
so, after ~3 hours of working on new configuration:
C.A.T. was killed, all ping/pong is running 1 time and have to reconfigure and start all again
(since last 2 days C.A.T. was dead too because of this...)
very angry
Code:
java -jar CAT.jar
Exception in thread "AWT-EventQueue-0" java.lang.ArithmeticException: / by zero
at java.math.BigDecimal.divideAndRound(BigDecimal.java:4106)
at java.math.BigDecimal.divide(BigDecimal.java:5153)
at java.math.BigDecimal.divide(BigDecimal.java:1561)
at java.math.BigDecimal.divide(BigDecimal.java:1591)
at CAT.zMarketClass.SingleMarket.getCurrentVolumeBTC(SingleMarket.java:248)
at CAT.mainPanel.JPanelMarketsCurrency.addRow(JPanelMarketsCurrency.java:116)
at CAT.mainPanel.JPanelMarketsCurrency.lambda$setMercati$37(JPanelMarketsCurrency.java:96)
at CAT.mainPanel.JPanelMarketsCurrency$$Lambda$18/16160114.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:311)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:744)
at java.awt.EventQueue.access$400(EventQueue.java:97)
at java.awt.EventQueue$3.run(EventQueue.java:697)
at java.awt.EventQueue$3.run(EventQueue.java:691)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:75)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:714)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
Exception in thread "AWT-EventQueue-0" java.lang.ArithmeticException: / by zero
at java.math.BigDecimal.divideAndRound(BigDecimal.java:4106)
at java.math.BigDecimal.divide(BigDecimal.java:5153)
at java.math.BigDecimal.divide(BigDecimal.java:1561)
at java.math.BigDecimal.divide(BigDecimal.java:1591)
at CAT.zMarketClass.SingleMarket.getCurrentVolumeBTC(SingleMarket.java:248)
at CAT.mainPanel.JPanelMarketsCurrency.addRow(JPanelMarketsCurrency.java:116)
at CAT.mainPanel.JPanelMarketsCurrency.lambda$setMercati$37(JPanelMarketsCurrency.java:96)
at CAT.mainPanel.JPanelMarketsCurrency$$Lambda$18/16160114.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:311)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:744)
at java.awt.EventQueue.access$400(EventQueue.java:97)
at java.awt.EventQueue$3.run(EventQueue.java:697)
at java.awt.EventQueue$3.run(EventQueue.java:691)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:75)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:714)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
killed
C.A.T. was killed, all ping/pong is running 1 time and have to reconfigure and start all again
(since last 2 days C.A.T. was dead too because of this...)
very angry
November 09, 2014, 08:27:31 AM
Hello: I am selling my C.A.T. core program for 0.35 BTC.
The API for Cryptsy has been disabled so you will have to buy a new one from Sampey for 0.20 BTC if you wish to use it for trading on Cryptsy.
If you wish to use it for other exchanges, the prices for the API are on the first post of this thread.
Its a fantastic program and does what the developer says. Sampey is one of the best developers I have seen who supports their products and always answers any email you send. I'm sad to let it go, but with family taking up most of my time, I just can't use it right now.
If you are interested, please PM and after the sale is complete, I will notify Sampey of the new owner's name.
With this sale you will get all the support that a normal C.A.T. user gets.
The API for Cryptsy has been disabled so you will have to buy a new one from Sampey for 0.20 BTC if you wish to use it for trading on Cryptsy.
If you wish to use it for other exchanges, the prices for the API are on the first post of this thread.
Its a fantastic program and does what the developer says. Sampey is one of the best developers I have seen who supports their products and always answers any email you send. I'm sad to let it go, but with family taking up most of my time, I just can't use it right now.
If you are interested, please PM and after the sale is complete, I will notify Sampey of the new owner's name.
With this sale you will get all the support that a normal C.A.T. user gets.
November 08, 2014, 06:36:38 PM
anything new about bitstamp frontend?
November 08, 2014, 05:37:36 PM
Althouh what you mentioned could be a useful feature also..the option to have multiple parameters on the same coin.
November 08, 2014, 05:31:49 PM
Much more efficient and faster...as soon as one order gets filled, another order gets placed.
Is placed at what price? Current Market Price??
Youre misunderstanding me. What I am saying is simple...Lets say you want to buy some 200 SDC at 0.00018 and the order gets filled. Instead of putting that 200 SDC to sell, CAT leaves it alone and puts another 200 buy order at 0.00018 or whatever price range the parameters are set. So instead of buying and selling, CAT just keeps buying.
You are probably thinking why not just manually on the exchanges put 1 big order or a many orders around that price range, and the reason for this is that accumulation is much more difficult this way. Once traders see a lot of buy support, they put orders of their own and as a result your orders dont fill, especially if the price is already near a bottom.
Oh ok i understand, so you mean something like
Set a 10% GAIN
PING 1 Sell100@100 -> TRADE
PING 2 Sell100@110 -> TRADE
PING 3 Sell100@121 -> TRADE
and so on.....
There's an HIGH risk to get your PING order "Frozen" and that strategy doesn't have any effect....
There is no gain. It just buys or it just sells. And there will only be 1 ping.
November 08, 2014, 05:28:42 PM
Much more efficient and faster...as soon as one order gets filled, another order gets placed.
Is placed at what price? Current Market Price??
Youre misunderstanding me. What I am saying is simple...Lets say you want to buy some 200 SDC at 0.00018 and the order gets filled. Instead of putting that 200 SDC to sell, CAT leaves it alone and puts another 200 buy order at 0.00018 or whatever price range the parameters are set. So instead of buying and selling, CAT just keeps buying.
You are probably thinking why not just manually on the exchanges put 1 big order or a many orders around that price range, and the reason for this is that accumulation is much more difficult this way. Once traders see a lot of buy support, they put orders of their own and as a result your orders dont fill, especially if the price is already near a bottom.
Oh ok i understand, so you mean something like
Set a 10% GAIN
PING 1 Sell100@100 -> TRADE
PING 2 Sell100@110 -> TRADE
PING 3 Sell100@121 -> TRADE
and so on.....
There's an HIGH risk to get your PING order "Frozen" and that strategy doesn't have any effect....
November 08, 2014, 05:25:50 PM
Much more efficient and faster...as soon as one order gets filled, another order gets placed.
Is placed at what price? Current Market Price??
Youre misunderstanding me. What I am saying is simple...Lets say you want to buy some 200 SDC at 0.00018 and the order gets filled. Instead of putting that 200 SDC to sell, CAT leaves it alone and puts another 200 buy order at 0.00018 or whatever price range the parameters are set. So instead of buying and selling, CAT just keeps buying. THe same option can apply to selling only.
You are probably thinking why not just manually on the exchanges put 1 big order or a many orders around that price range, and the reason for this is that accumulation is much more difficult this way. Once traders see a lot of buy support, they put orders of their own and as a result your orders dont fill, especially if the price is already near a bottom.
Same concept applies towards selling. If I want to sell my coins, I am better off putting small orders 1 at a time instead of just put huge sell orders because most often this creates panic dumps and more sell pressure, as a result the big orders most likely wont fill, especially if the price has reached a ceiling or peak.
November 08, 2014, 05:12:27 PM
Much more efficient and faster...as soon as one order gets filled, another order gets placed.
Is placed at what price? Current Market Price??
November 08, 2014, 05:08:26 PM
Can i suggest to have a buy only or sell only feature? There are some coins where I want to accumulate and I want the bot only to buy and not wait for the complementary sell and visa versa with coins I want to sell only, where after one sell order fills another sell order gets put in place
I will look about this.
Technically is possible, but i don't understand why you need C.A.T.
If you want to sell all or accumulate you can do it direcly from the exchange.
What kind of advantage can you get on doing using C.A.T.?
Much more efficient and faster...as soon as one order gets filled, another order gets placed. Its the same thing as ping and pong, but both ping and pong orders will be the same..if you want to buy it will just buy..if you want to sell then it will just keep selling.
November 08, 2014, 05:01:58 PM
Can i suggest to have a buy only or sell only feature? There are some coins where I want to accumulate and I want the bot only to buy and not wait for the complementary sell and visa versa with coins I want to sell only, where after one sell order fills another sell order gets put in place
I will look about this.
Technically is possible, but i don't understand why you need C.A.T.
If you want to sell all or accumulate you can do it direcly from the exchange.
What kind of advantage can you get on doing using C.A.T.?
November 08, 2014, 03:34:18 PM
Can i suggest to have a buy only or sell only feature? There are some coins where I want to accumulate and I want the bot only to buy and not wait for the complementary sell and visa versa with coins I want to sell only, where after one sell order fills another sell order gets put in place
November 08, 2014, 05:23:48 AM
i have a feature request:
i want the possibility in market explorer where my own orders are listed that im able rightclick a order and select
take into cat as ping (or take into cat as pong)
and a move all buyorders into cat as ping (or pong)
and move all sellorders into cat as pong (or ping)
(when select pong the orders should fill by calculate with ctual cat settings the missing informations
example when cat is set to 2%
and i wana move one of my price 100 sellorders into cat as a pong
the cat estimate the ping buy price was 98
reason for all this if cat crash or pc crash i can refill my cat with existing orders
i want the possibility in market explorer where my own orders are listed that im able rightclick a order and select
take into cat as ping (or take into cat as pong)
and a move all buyorders into cat as ping (or pong)
and move all sellorders into cat as pong (or ping)
(when select pong the orders should fill by calculate with ctual cat settings the missing informations
example when cat is set to 2%
and i wana move one of my price 100 sellorders into cat as a pong
the cat estimate the ping buy price was 98
reason for all this if cat crash or pc crash i can refill my cat with existing orders
These are good suggestions
Some are easyer, some others are complex, but i will sure add these features
November 07, 2014, 08:54:44 PM
i have a feature request:
i want the possibility in market explorer where my own orders are listed that im able rightclick a order and select
take into cat as ping (or take into cat as pong)
and a move all buyorders into cat as ping (or pong)
and move all sellorders into cat as pong (or ping)
(when select pong the orders should fill by calculate with ctual cat settings the missing informations
example when cat is set to 2%
and i wana move one of my price 100 sellorders into cat as a pong
the cat estimate the ping buy price was 98
reason for all this if cat crash or pc crash i can refill my cat with existing orders
i want the possibility in market explorer where my own orders are listed that im able rightclick a order and select
take into cat as ping (or take into cat as pong)
and a move all buyorders into cat as ping (or pong)
and move all sellorders into cat as pong (or ping)
(when select pong the orders should fill by calculate with ctual cat settings the missing informations
example when cat is set to 2%
and i wana move one of my price 100 sellorders into cat as a pong
the cat estimate the ping buy price was 98
reason for all this if cat crash or pc crash i can refill my cat with existing orders
November 07, 2014, 02:34:25 AM
He done it but no result.
Problem seems the double click on the Table Component (Portfolio or Market List).
Never heard about that, so i'm trying to study a solution....
Problem seems the double click on the Table Component (Portfolio or Market List).
Never heard about that, so i'm trying to study a solution....
Same problem here... I'm running windows 8.1 Pro and I can't get the markets to open. But it works fine on Windows 7 Pro.
Yes I installed Java on both.
Was this ever resolved?
Thanks!
Strato
Yes, user told me that he re-download the RAR File and re-extract and everything works fine.
November 06, 2014, 11:17:07 PM
He done it but no result.
Problem seems the double click on the Table Component (Portfolio or Market List).
Never heard about that, so i'm trying to study a solution....
Problem seems the double click on the Table Component (Portfolio or Market List).
Never heard about that, so i'm trying to study a solution....
Same problem here... I'm running windows 8.1 Pro and I can't get the markets to open. But it works fine on Windows 7 Pro.
Yes I installed Java on both.
Was this ever resolved?
Thanks!
Strato
November 06, 2014, 10:36:06 PM
Our team is happy to assist with integration of the Bitspark API into C.A.T. We are keen to render any assistance to get this done.
Regards,
Bitspark Team
Regards,
Bitspark Team
November 06, 2014, 04:07:00 PM
you fight against your customers like enemys... thats wrong!
please do not say stupid things
November 06, 2014, 03:53:43 PM
as i told ya twice, i like cat.
no one has as much Patience with cat than i do.
but i realy don't like the way you do with your customers!
don't tell Storys, so no one has to blame you!
sorry, i complain about non working bitsatmp frontend after i payed twice for it ( not your fault, i know!)
no one has as much Patience with cat than i do.
but i realy don't like the way you do with your customers!
don't tell Storys, so no one has to blame you!
sorry, i complain about non working bitsatmp frontend after i payed twice for it ( not your fault, i know!)
It's from page 32 (https://bitcointalksearch.org/topic/m.9310689) that you're complaining
If you like CAT stop complaining and and have this bad attitude.
Do you think that only for the reason you buy cat you can tell what you want and talks me like i'm stupid? Bad news, you can't.
You don't like the way i'm doing?
I reply to any of your topics, i make a discount for your error on a Bitstamp API, i send you back your donation, i add some of your suggestions (buy/sell pool reuse and limit) in the 2.3,but i don't like the way i'm doing with customers?? LOL
I also have a private life, i'm not always on CAT.
You must wait for the fix.
most of above... dito!
you fight against your customers like enemys... thats wrong!
Jump to: