###Joining Proof###
Campaign: Facebook
campaign:twiter
Campaign: TELEGRAM
Topic: ⚡⚡[BOUNTY]⚡⚡SYNTHESTECH - Synthesis of Precious Metals⚡⚡ (Read 23027 times)
1st of December, video-stream of “Synthestech” project was conducted
https://blog.synthestech.com/1st-of-december-video-stream-of-synthestech-project-was-conducted-de8aa0c0faf0
https://blog.synthestech.com/1st-of-december-video-stream-of-synthestech-project-was-conducted-de8aa0c0faf0
Few words about SYNTHESTECH Center
Its total usable area is 400 square meters, which are spread over two floors. The center was built in full compliance with the standards, taking into account regional building codes and environmental requirements. Foundation structures and floors are cast from high-strength concrete of grade 500. The height of the building is 3.5 meter. The building is equipped with all necessary systems. The center is connected to the Internet via a fiber-optic channel at a speed of 300 megabits.
A workshop, a construction department, a research and analytical complex, and a briefing room will be located in “Synthestech” Center.
The building itself is located in a beautiful place, in a lived-in area near the city center of Sochi, and it meets all the stated objectives. All this together allows us fulfillment of our stated plans.
Here, our work under implementation of “Synthestech” Project on the Cold Synthesis of Valuable Elements is entering a practical phase.
We are starting to move to our new center. However, due to long rains and high humidity, some processes are not completed.
Sometimes we are asked — how likely is achievement of project commercialization by 2020 announced in White Paper? We are now absolutely confident in the implementation of this plan and, as it is evident from the already embodied stages, we are consistently moving towards its implementation. Some perspectives and plans will be revealed during our video stream.
On behalf of the project head Vladislav Karabanov and the team working in the project, we thank all those who invest in “Synthestech” Project, help and believe in it.
Below are photos of our Center. As the Center gets settled, we will provide photo information.
Our Center
View from the facade
30 meters to the Center
Work goes till late
We try on a place for a logo
Learn more and sign up for newsletter at our web site: https://ico.synthestech.com/
https://blog.synthestech.com/our-center-is-finished-6f70a457d2b9
Scandium is under review by “Synthestech”
As it is known, “Synthestech” project is engaged in developing the technology for obtaining valuable elements using Cold Nuclear Fusion. We are primarily focused on platinum metals. However, during experiments, other, no less interesting elements can be obtained.
https://blog.synthestech.com/scandium-is-under-review-by-synthestech-627838624135
Very good news - Proof of achievements in research of “Synthestech”
We are grateful to everyone who participates in investing our project. This confidence is of great importance for us, and we will justify it.
At the same time, sometimes questions on the evidence that the obtained elements are acquired as a result of Cold Nuclear Transmutation processes of chemical elements implementation. Indeed, this is an important question.
This is a very difficult task. Moreover, artificially synthesized elements are impossible to distinguish from the natural usual methods of analysis. This is the same chemical element. (It is right, their biological activity, as we believe, is different, but this is a completely new sphere, where we operate). However, we successfully coped with this task and we have indisputable proof of our success.
Especially for this purpose we have equipped analytical laboratory with advanced methods of analysis, which allows us to present evidence of our results.
All chemical elements have from one to several isotopes.
Isotopes are types of atoms of one chemical element differing in mass of nuclei. Isotope elements have the same number of protons but different number of neutrons in the nuclei. Natural balance of stable isotopes of one chemical element has a completely strict value. For example, sulfur (S) isotopes in nature have the following ratio — 32S (95,02%), 33S (0,75 %), 34S (4,21 %), 36S (0,02 %). Deviations are extremely rare, within the percentage. This is true even for the sulfur, that is found in meteorites. That is, all processes in the foreseeable space lead to a constant natural ratio of isotopes. And so touches all chemical elements. Today, a person can change this ratio, but only with the help of enrichment facilities worth hundreds of millions of dollars. Such facilities are used in the nuclear industry and access to them is closed. In addition, it is necessary to develop an enrichment technology for each isotope, which also costs many millions of dollars.
At the same time, during the Cold transmutation of nuclei processes of, newly obtained elements, as a rule, also reproduce the natural ratios of isotopes. However, as a rule, it does not always mean — under some processes that we use to carry out Cold Transmutation, we change isotopic ratio of individual elements.
This concerns, for example, Titan (Ti) — the natural ratio of its isotopes is as follows: 46Ti (8,25 %), 47Ti (7,44 %), 48Ti (73,72 %), 49Ti (5,41 %), 50Ti (5,18 %).
In our samples, which mass spectrometry analysis card is applied, the ratio differs significantly from the natural one — 46Ti (3,89%), 47Ti (7,29%), 48Ti (76,75%), 49Ti (5,71%), 50Ti (5,75%). As it is evident, the 46Ti isotope is 2 (!!) times less in our sample than the natural one.
Such Titan (Ti) is not available in nature, it is impossible to buy or somehow obtain it.
Nobody in the world can make this. This fact is a reliable proof of the implementation of Cold Transmutation within the framework of «Synthestech» project.
Everyone can make sure in it. We plan to send such samples to non-believer — to check them.
In the nearest future, we will move to our new Center and the implementation of the Cold Synthesis project of valuable elements will move into a practical phase.
https://blog.synthestech.com/proof-of-achievements-in-research-of-synthestech-de8e8a77a4f3
We are grateful to everyone who participates in investing our project. This confidence is of great importance for us, and we will justify it.
At the same time, sometimes questions on the evidence that the obtained elements are acquired as a result of Cold Nuclear Transmutation processes of chemical elements implementation. Indeed, this is an important question.
This is a very difficult task. Moreover, artificially synthesized elements are impossible to distinguish from the natural usual methods of analysis. This is the same chemical element. (It is right, their biological activity, as we believe, is different, but this is a completely new sphere, where we operate). However, we successfully coped with this task and we have indisputable proof of our success.
Especially for this purpose we have equipped analytical laboratory with advanced methods of analysis, which allows us to present evidence of our results.
All chemical elements have from one to several isotopes.
Isotopes are types of atoms of one chemical element differing in mass of nuclei. Isotope elements have the same number of protons but different number of neutrons in the nuclei. Natural balance of stable isotopes of one chemical element has a completely strict value. For example, sulfur (S) isotopes in nature have the following ratio — 32S (95,02%), 33S (0,75 %), 34S (4,21 %), 36S (0,02 %). Deviations are extremely rare, within the percentage. This is true even for the sulfur, that is found in meteorites. That is, all processes in the foreseeable space lead to a constant natural ratio of isotopes. And so touches all chemical elements. Today, a person can change this ratio, but only with the help of enrichment facilities worth hundreds of millions of dollars. Such facilities are used in the nuclear industry and access to them is closed. In addition, it is necessary to develop an enrichment technology for each isotope, which also costs many millions of dollars.
At the same time, during the Cold transmutation of nuclei processes of, newly obtained elements, as a rule, also reproduce the natural ratios of isotopes. However, as a rule, it does not always mean — under some processes that we use to carry out Cold Transmutation, we change isotopic ratio of individual elements.
This concerns, for example, Titan (Ti) — the natural ratio of its isotopes is as follows: 46Ti (8,25 %), 47Ti (7,44 %), 48Ti (73,72 %), 49Ti (5,41 %), 50Ti (5,18 %).
In our samples, which mass spectrometry analysis card is applied, the ratio differs significantly from the natural one — 46Ti (3,89%), 47Ti (7,29%), 48Ti (76,75%), 49Ti (5,71%), 50Ti (5,75%). As it is evident, the 46Ti isotope is 2 (!!) times less in our sample than the natural one.
Such Titan (Ti) is not available in nature, it is impossible to buy or somehow obtain it.
Nobody in the world can make this. This fact is a reliable proof of the implementation of Cold Transmutation within the framework of «Synthestech» project.
Everyone can make sure in it. We plan to send such samples to non-believer — to check them.
In the nearest future, we will move to our new Center and the implementation of the Cold Synthesis project of valuable elements will move into a practical phase.
https://blog.synthestech.com/proof-of-achievements-in-research-of-synthestech-de8e8a77a4f3
News of project “Synthestech” https://blog.synthestech.com/news-of-project-synthestech-426a4000da90
By numerous requests, we are working at the ability to receive “Synthestech” project tokens using PayPal.
By numerous requests, we are working at the ability to receive “Synthestech” project tokens using PayPal.
Perticipation Proof
Twitter campaign
Facebook campaign
Twitter campaign
Facebook campaign
Soon we will finish construction of the 2nd floor
Construction of the laboratory center “Synthestech” has already been realized by 60%. Internal technical systems for installation are prepared. In the nearest future we will begin the interior decoration. In November, a fully-fledged work on the project will be launched in the laboratory center. However, even now the work in the analytical laboratory, that we have created, does not stop. The analysis of the elemental composition of the substance obtained as a result of cold synthesis is carried out.
https://blog.synthestech.com/soon-we-will-finish-construction-of-the-2nd-floor-97ff9dc3cce9
Construction of the laboratory center “Synthestech” has already been realized by 60%. Internal technical systems for installation are prepared. In the nearest future we will begin the interior decoration. In November, a fully-fledged work on the project will be launched in the laboratory center. However, even now the work in the analytical laboratory, that we have created, does not stop. The analysis of the elemental composition of the substance obtained as a result of cold synthesis is carried out.
https://blog.synthestech.com/soon-we-will-finish-construction-of-the-2nd-floor-97ff9dc3cce9
News of the project “Synthestech”
As we reported earlier, realization of construction program of our laboratory center started in Sochi ( Olympic Games 2014 residence), Russia. For 2 weeks the site for the construction of the complex has been fully prepared and the anti-slide piles are flooded. In the coming days, the lower slab of the concrete frame of the building will be molded. (see photo).
We plan to erect the building without furnishings till the middle of September. This will allow us to provide our work on the project with the basic necessary conditions by the end of October.
As practice has shown without a separate housing it is extremely difficult to continue work. This is as a condition for our research and design work, and also the key task of preserving know-how.
At the same time, the work of our laboratory of substance analysis, which we have created, is gaining momentum. In the nearest future we will provide our investors with positive information
We remind you that discount in the amount of 33,33% for project tokens is valid for the period of construction and start-up of the laboratory
https://blog.synthestech.com/news-of-the-project-synthestech-6ad8d82835d4
As we reported earlier, realization of construction program of our laboratory center started in Sochi ( Olympic Games 2014 residence), Russia. For 2 weeks the site for the construction of the complex has been fully prepared and the anti-slide piles are flooded. In the coming days, the lower slab of the concrete frame of the building will be molded. (see photo).
We plan to erect the building without furnishings till the middle of September. This will allow us to provide our work on the project with the basic necessary conditions by the end of October.
As practice has shown without a separate housing it is extremely difficult to continue work. This is as a condition for our research and design work, and also the key task of preserving know-how.
At the same time, the work of our laboratory of substance analysis, which we have created, is gaining momentum. In the nearest future we will provide our investors with positive information
We remind you that discount in the amount of 33,33% for project tokens is valid for the period of construction and start-up of the laboratory
https://blog.synthestech.com/news-of-the-project-synthestech-6ad8d82835d4
Greetings !!!
I've been following this project for a long time, but now I've become especially active!
The team is moving in the right direction! I wish more listings on the top exchanges and fulfillment of the set goals !!!
I have joined
Facebook campaign
Twitter campaign
Signature campaign
Facebook campaign
Twitter campaign
Signature campaign
News of the project “Synthestech”
As we reported earlier, realization of construction program of our laboratory center started in Sochi ( Olympic Games 2014 residence), Russia. For 2 weeks the site for the construction of the complex has been fully prepared and the anti-slide piles are flooded. In the coming days, the lower slab of the concrete frame of the building will be molded. (see photo).
We plan to erect the building without furnishings till the middle of September. This will allow us to provide our work on the project with the basic necessary conditions by the end of October.
As practice has shown without a separate housing it is extremely difficult to continue work. This is as a condition for our research and design work, and also the key task of preserving know-how.
At the same time, the work of our laboratory of substance analysis, which we have created, is gaining momentum. In the nearest future we will provide our investors with positive information
We remind you that discount in the amount of 33,33% for project tokens is valid for the period of construction and start-up of the laboratory
https://blog.synthestech.com/news-of-the-project-synthestech-6ad8d82835d4
As we reported earlier, realization of construction program of our laboratory center started in Sochi ( Olympic Games 2014 residence), Russia. For 2 weeks the site for the construction of the complex has been fully prepared and the anti-slide piles are flooded. In the coming days, the lower slab of the concrete frame of the building will be molded. (see photo).
We plan to erect the building without furnishings till the middle of September. This will allow us to provide our work on the project with the basic necessary conditions by the end of October.
As practice has shown without a separate housing it is extremely difficult to continue work. This is as a condition for our research and design work, and also the key task of preserving know-how.
At the same time, the work of our laboratory of substance analysis, which we have created, is gaining momentum. In the nearest future we will provide our investors with positive information
We remind you that discount in the amount of 33,33% for project tokens is valid for the period of construction and start-up of the laboratory
https://blog.synthestech.com/news-of-the-project-synthestech-6ad8d82835d4
Current news of the project “Synthestech”
https://blog.synthestech.com/current-news-of-the-project-synthestech-bf05ce98c9bb
Construction of our own laboratory for isotope analysis of chemical elements was one of the most important means for the implementation of our project of cold synthesis of valuable elements.https://blog.synthestech.com/current-news-of-the-project-synthestech-bf05ce98c9bb
We begin to build our laboratory complex. The site for the construction is acquired. Within 3-4 months the complex will be built. It will be used for assembling and launch of experimental reactor for cold fusion of platinum metals.
https://twitter.com/Synthestech/status/1012313078715813889
https://twitter.com/Synthestech/status/1012313078715813889
The project “Synthestech” is building new center and provides discount for STT tokens.
https://blog.synthestech.com/news-of-the-project-synthestech-we-are-building-our-center-c336be5d5946
We begin to build our laboratory complex. The site for the construction is acquired. Within 3-4 months the complex will be built. It will be used for assembling and launch of experimental reactor for cold fusion of platinum metals.
https://twitter.com/Synthestech/status/1012313078715813889
https://twitter.com/Synthestech/status/1012313078715813889
It was a very long ICO,I'm glad that it ended successfully.I hope that soon we will receive our reward.I hope that everything will go smoothly and without delays.
Thanks for your suppport and kind words)
we want to make a success))
all the payments are completed)
Hi to all!!!
Bounty and Airdrop distribution is completed!
You can see the results HERE!
Thanks for your activity and support!
The company is over,the payout for bounty received,the amount is very small if you take into account that the company Slagelse half.But this is not the main thing ,despite the low remuneration,I think the main factor is that the payment is received.I want to say thanks to the team SYNTHESTECH for good work
thanks a lot for your support))) I got bounty today on my wallet and I thank SYNTHESTECH team for the work done. I wish good luck in the development of the project!!
you are welcome!Thanks for your support)))
I've done bounty for a very long time, it's a shame that I was paid only for a twitter, not paid for facebook, I do not believe in this project, it certainly will not appear on stock exchanges.
hi,
did you make reports and fulfill all the requirements?
Jump to: