BTC Miner Snow Panther B1+ | Bitcointalksearch.org

HashNOOB

newbie

Activity: 9

Merit: 6

Quote from: chipi48 on August 14, 2019, 10:50:47 AM

There is a new english website: bitfily.vip, but you cannot make any orders. And their original chinese website is still online: bitfily.com...

I believe that .vip address redirects to the .com address now...

For the sake of a new thread, I have a question about the OS for the Bitfily devices...
Just received an A1+, wouldn't draw an IP so I pulled the OrangePi Zero board out. I grabbed the SD card out of it and slid it into my card reader only to find that it was empty (windows recognized it as a drive without needing to format and shows empty)

Does anyone have a link to the original OS .rar file?

anything else I should know about this 90 pound monster? I will post some stats and data if I can get it working!

chipi48

newbie

Activity: 12

Merit: 10

Recently I have noted there is a new model from Bitfily. The B3.

www.bitfily.com/product/snow-panther-b3/

Chip energy efficiency says only 0.081J/Gh, so, not a big improvement from B1+ but price (~669.00USD) and stock availability are interesting.

chipi48

newbie

Activity: 12

Merit: 10

Quote from: hatem31 on August 09, 2019, 03:45:11 PM

hello I just delivered your asic b1 +, I try to turn it on but there is a problem that I can not solve:
1- the blue lights on the three sets of hash board PCI-e connectors is not keep on.
2 - the configuration page does not show any status it remains blocked.

https://imgur.com/a/0T4AV9U

Have you resolved this issue? Blue leds should turn on in a few seconds. If not, try to disconnect from mainboard one of the fans, and reconnect after blue leds turn on.

There is a new english website: bitfily.vip, but you cannot make any orders. And their original chinese website is still online: bitfily.com

We have received a new batch of B1+. But It´s different in some details, like mainboard.
Here is a short video and screencap of efficiency and performance mode.

https://imgur.com/a/3Kw58uN

I will add some details later.

ZimbaCardi

member

Activity: 128

Merit: 36

Quote from: hatem31 on August 09, 2019, 03:45:11 PM

hello I just delivered your asic b1 +, I try to turn it on but there is a problem that I can not solve:
1- the blue lights on the three sets of hash board PCI-e connectors is not keep on.
2 - the configuration page does not show any status it remains blocked.

https://imgur.com/a/0T4AV9U

Those blue lights will blink when it starts hashing, the connections look good and that screen will change in a few minutes.

Steamtyme is right, be a little patient. There are a few of us here that have those, so hope we can help because the company is gone now.

Steamtyme

legendary

Activity: 1554

Merit: 2037

Hey sorry to hear you are having troubles. Not positive but I think the company has gone out of business - can't even check their site anymore.

To try and help though. How long are you leaving the machine on before trying to log in and monitor. Gear is tricky, sometimes you can log in right away sometimes it's a few minutes. If you've given it plenty of time check to see if there are any loose connections. You may wind up having to open the machine, not sure.

Might want to check with one of the people in this thread who bought one for additional troubleshooting.

hatem31

newbie

Activity: 1

Merit: 0

hello I just delivered your asic b1 +, I try to turn it on but there is a problem that I can not solve:
1- the blue lights on the three sets of hash board PCI-e connectors is not keep on.
2 - the configuration page does not show any status it remains blocked.

https://imgur.com/a/0T4AV9U

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Another *possible* replacement may be the PSU for Whatsminer M10 series available through Pangolinminer. The M10 also uses a split supply with the high side being around 15v.

The catch to using other PSU's is that all of the split supplies have communications between the controller and PSU to set the voltage fed to the chip strings on the hash boards. What the com signals are and where they feed into the PSU remains to be seen.

ZimbaCardi

member

Activity: 128

Merit: 36

Thank you and NotFuzzy, saved me from diging it out, will search for options also.

chipi48

newbie

Activity: 12

Merit: 10

Hey, thank you for the merit @ZimbaCardi Cheesy

I am not a electronic specialist like many here, but I think is not very good idea to connect conventional Psu to B1.

User NotFuzzyWarm already talked about that

Quote from: NotFuzzyWarm on October 15, 2018, 02:35:03 PM

DO pay close attention to the power specs for this! The miner CANNOT use a normal PSU. It requires 2 different voltage inputs, one for the control board and a higher voltage one for the hash boards.
From their site:
3. If the voltage for the miner’s control board doesn’t range from 10.8V to 13.2V and the voltage for the hash boards doesn’t range from 14.5V to 15.5V, the miner may fail to work or even breaks.

If you look at their PSU for the miner it is dual voltage out...

It seems it is very difficult to find a replacement for B1's Psu.

Rabinovich also talked about other Asic that uses 14-15v PSU. Innosilicon T2.

Maybe this Psu can work with B1?
http://www.innosilicon.com/html/2200w-psu/index.html
But, it´s 14v not 15v.

I will keep searching.

ZimbaCardi

member

Activity: 128

Merit: 36

Great idea, thank you, merit given, Try that with some regular computer PSU's I have laying around?

I believe the only "odd" current on The B1+ is for the Mainboard. Any idea if the Hashboards are the the usual 12V?

Have to read the manual before I go try this, hope it is regular PCIe voltage.

chipi48

newbie

Activity: 12

Merit: 10

I am glad to know that, ZimbaCardi. I have positive feedback too about post-sale service of Bitfily, but same as you, I had to pay customs taxes. They have send me a PSU that is capable of handle hotter conditions. Is OK now.
One thing that has helped me is use 2 PSU per Asic. I mean, one psu for 2 hashboards. It works very well.

ZimbaCardi

member

Activity: 128

Merit: 36

Like Chipi48 said there is an issue with some of the PSU's when at 32C or above, 2 even shorted the cable connecting the mainboard, 1 PSU survived other had to be replaced, Bitfily did replace the cables and connectors at no cost to my Freight forwarder in China (Cost to get here is a different story).

They asked to receive the damaged PSU before sending the replacement. I just bought another one since shipping to China was USD $75, they will send and extra cable and Mainboard for my troubles so I am very happy with their customer support, they are just far is all.

chipi48

newbie

Activity: 12

Merit: 10

@ZimbaCardi, PM'd you. At least, I tried Tongue

It's just about temperature conditions, my B1+'s psu cannot handle 32C and above, it makes the miner crash. Have you experienced something similar?

ZimbaCardi

member

Activity: 128

Merit: 36

Sorry for the late reply, tried PMing you but you have it so newbies can't PM you.
I do speak spanish.
This miner comes with it's own PSU, if you are trying something else I'm afraid it'll be an engineering project of it's own.
Other than that; How can I help?

chipi48

newbie

Activity: 12

Merit: 10

hey ZimbaCardi, do you speak spanish? I can't send you a pm. I am facing some serious problem regarding the psu.

ZimbaCardi

member

Activity: 128

Merit: 36

Since Antpool now supports ASIC Boost I switched 2 of this there and they do hash but at about 20 TH/s, almost 20% drop from Slushpool, not sure if this happens with other AB miners.

Rabinovitch

legendary

Activity: 2030

Merit: 1076

A humble Siberian miner

Quote from: NotFuzzyWarm on October 15, 2018, 02:35:03 PM

DO pay close attention to the power specs for this! The miner CANNOT use a normal PSU. It requires 2 different voltage inputs, one for the control board and a higher voltage one for the hash boards.
From their site:
3. If the voltage for the miner’s control board doesn’t range from 10.8V to 13.2V and the voltage for the hash boards doesn’t range from 14.5V to 15.5V, the miner may fail to work or even breaks.

If you look at their PSU for the miner it is dual voltage out...

Just like Innosilicon's T2 miners... It looks that this is a common practice these days...

ZimbaCardi

member

Activity: 128

Merit: 36

Quote from: Steamtyme on October 16, 2018, 10:24:43 AM

Thanks for the updates. I'll add them to the current hardware thread, with a link here for the discussion about the miner.

Just to be sure when you bought your it was part of a 100 unit order? Sounds like you were pooled in with others/businesses.

Any chance you have or took a photo of the shipment? I'm just trying to get an idea of how many of these they were able to deliver or ship out so far. Anyways I'm satisfied that I've seen at least one.

I was pooled with others, can do it again. They have in stock a batch of 23.5 TH/s if interested, next batch unknown date.

By shipment, you mean photo of the boxes arriving? No, they pooled me in with others but shipped direct to me.

Quote from: vincl on October 16, 2018, 09:03:46 AM

slushpool works for you? on slush i only get about 19-20 TH/s with this miner

Yeah, had a "scoring hash rate" of 50.27 with both before I had to power down for other issues.

Steamtyme

legendary

Activity: 1554

Merit: 2037

Thanks for the updates. I'll add them to the current hardware thread, with a link here for the discussion about the miner.

Quote from: ZimbaCardi on October 16, 2018, 01:13:31 AM

My sales person can pool a few of us together, even with different shipping addresses since I am working with possible distributors in Mexico.

Just to be sure when you bought your it was part of a 100 unit order? Sounds like you were pooled in with others/businesses.

Any chance you have or took a photo of the shipment? I'm just trying to get an idea of how many of these they were able to deliver or ship out so far. Anyways I'm satisfied that I've seen at least one.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: ZimbaCardi on October 16, 2018, 01:13:31 AM

...
It uses ASIC Boost so you need a pool with that, I use Slushpool, Bitfily suggests "www.dpool.top slushpool.com and www.poolin.com/"

In addition to those, current list of pools supporting AB:
http://kano.is
https://bitminter.com
http://solo.ckpool.org
http://ckpool.org
https://www.f2pool.com

May be more, but I don't care as I only mine at Kano (and have no miners that use AB).

Topic: BTC Miner Snow Panther B1+ (Read 1784 times)