Building RHEL(Cent/SL) and Fedora repositories if people are interested

boozer

sr. member

Activity: 309

Merit: 250

This still live? I'm trying to figure out how to get altcoins in fedora.

meltingrobot

member

Activity: 63

Merit: 10

Added CHNCoin

meltingrobot

member

Activity: 63

Merit: 10

Yeah, it looks like they have miniupnp in their repo and also in rpmforge repo. I built my RPMS against the rpmforge miniupnp. The boost rpms are now in the coins yum repo. Doing the below commands should work to do an update.

Code:

yum clean all && yum update

kaputt

member

Activity: 70

Merit: 10

Quote from: meltingrobot on May 23, 2013, 07:00:06 AM

Quote from: kaputt on May 22, 2013, 06:42:32 PM

Quote from: kaputt on May 22, 2013, 04:52:23 PM

Quote from: meltingrobot on May 22, 2013, 09:28:44 AM

Quote from: kaputt on May 22, 2013, 09:04:47 AM

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

The biggest problem you are probably hitting with compiling is the fact that RHEL/CENT/SL/Fedora do not ship OpenSSL with EC due to a perceived possible patent issue. The first thing I had to do was build openssl into a different directory. Then I had to fix every Makefile.unix to use that directory as the library directory for SSL. You also have to tell it where the library directory for DB4 is. Plus, you have to fix all the boost libraries to be boost-mt. It was a big pain to figure most of this out, but once you get one down, the rest are all pretty much the same steps.

Yes. Recompiling OpenSSL with EC enabled was difficult and took me a long time to figure out. There were too many bad references on the Internet. Once i had that solved my boost gave me trouble. I have not made changes in the makefile. I didn't want to mess things up. I will try one of the repos when I have a chance.

I tried the repo and got errors during yum update.

Code:

--> Finished Dependency Resolution
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_thread-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_filesystem-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_program_options-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_system-mt.so.1.48.0()(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

Before I tried the repo, I tried again to fix boost. I don't think I have the compiler include paths and linker library paths set right. I tried to do this in the makefile, but it didn't work. I don't really know enough to mess around with that.

How did you "fix all the boost libraries to be boost-mt"?

Ah, my bad, I hadn't tested the EL6 ones on a new system yet. You need newer boost libraries than what comes with RHEL6. I had already recompiled the ones that come with Fedora 18 for servers at work that needed newer ones. I copied the updated boost RPMS out into the repo if you want to use them.

Ok. I want to try using the boost from your repo. How do I do that? Also, I'm getting a different error after yum install. Do I need to get rid of the olea repo?

Code:

--> Finished Dependency Resolution
Error: Package: miniupnpc-1.5-1.fc15.i686 (olea)
Requires: libminiupnpc.so.5
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libminiupnpc.so.5()(64bit)
Removing: miniupnpc-1.5-1.el6.rf.x86_64 (@rpmforge)
libminiupnpc.so.5()(64bit)
Updated By: miniupnpc-1.5-1.fc15.i686 (olea)
Not found
Error: Package: bbqcoin-130522-1.el6.x86_64 (@coins)
Requires: libminiupnpc.so.5()(64bit)
Removing: miniupnpc-1.5-1.el6.rf.x86_64 (@rpmforge)
libminiupnpc.so.5()(64bit)
Updated By: miniupnpc-1.5-1.fc15.i686 (olea)
Not found
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

meltingrobot

member

Activity: 63

Merit: 10

Added Source RPMS for those that want to see the awful hacks I did in the SPEC files to get these to compile.

Added nibble
Added yacoin

meltingrobot

member

Activity: 63

Merit: 10

Quote from: kaputt on May 22, 2013, 06:42:32 PM

Quote from: kaputt on May 22, 2013, 04:52:23 PM

Quote from: meltingrobot on May 22, 2013, 09:28:44 AM

Quote from: kaputt on May 22, 2013, 09:04:47 AM

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

The biggest problem you are probably hitting with compiling is the fact that RHEL/CENT/SL/Fedora do not ship OpenSSL with EC due to a perceived possible patent issue. The first thing I had to do was build openssl into a different directory. Then I had to fix every Makefile.unix to use that directory as the library directory for SSL. You also have to tell it where the library directory for DB4 is. Plus, you have to fix all the boost libraries to be boost-mt. It was a big pain to figure most of this out, but once you get one down, the rest are all pretty much the same steps.

Yes. Recompiling OpenSSL with EC enabled was difficult and took me a long time to figure out. There were too many bad references on the Internet. Once i had that solved my boost gave me trouble. I have not made changes in the makefile. I didn't want to mess things up. I will try one of the repos when I have a chance.

I tried the repo and got errors during yum update.

Code:

--> Finished Dependency Resolution
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_thread-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_filesystem-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_program_options-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_system-mt.so.1.48.0()(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

Before I tried the repo, I tried again to fix boost. I don't think I have the compiler include paths and linker library paths set right. I tried to do this in the makefile, but it didn't work. I don't really know enough to mess around with that.

How did you "fix all the boost libraries to be boost-mt"?

Ah, my bad, I hadn't tested the EL6 ones on a new system yet. You need newer boost libraries than what comes with RHEL6. I had already recompiled the ones that come with Fedora 18 for servers at work that needed newer ones. I copied the updated boost RPMS out into the repo if you want to use them.

kaputt

member

Activity: 70

Merit: 10

And ultimately, I need to learn how to compile this myself without a repo, so that I can hop on any random new *coin.

kaputt

member

Activity: 70

Merit: 10

Quote from: kaputt on May 22, 2013, 04:52:23 PM

Quote from: meltingrobot on May 22, 2013, 09:28:44 AM

Quote from: kaputt on May 22, 2013, 09:04:47 AM

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

The biggest problem you are probably hitting with compiling is the fact that RHEL/CENT/SL/Fedora do not ship OpenSSL with EC due to a perceived possible patent issue. The first thing I had to do was build openssl into a different directory. Then I had to fix every Makefile.unix to use that directory as the library directory for SSL. You also have to tell it where the library directory for DB4 is. Plus, you have to fix all the boost libraries to be boost-mt. It was a big pain to figure most of this out, but once you get one down, the rest are all pretty much the same steps.

Yes. Recompiling OpenSSL with EC enabled was difficult and took me a long time to figure out. There were too many bad references on the Internet. Once i had that solved my boost gave me trouble. I have not made changes in the makefile. I didn't want to mess things up. I will try one of the repos when I have a chance.

I tried the repo and got errors during yum update.

Code:

--> Finished Dependency Resolution
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_thread-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_filesystem-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_program_options-mt.so.1.48.0()(64bit)
Error: Package: bitcoin-130522-1.el6.x86_64 (coins)
Requires: libboost_system-mt.so.1.48.0()(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

Before I tried the repo, I tried again to fix boost. I don't think I have the compiler include paths and linker library paths set right. I tried to do this in the makefile, but it didn't work. I don't really know enough to mess around with that.

How did you "fix all the boost libraries to be boost-mt"?

kaputt

member

Activity: 70

Merit: 10

Quote from: meltingrobot on May 22, 2013, 09:28:44 AM

Quote from: kaputt on May 22, 2013, 09:04:47 AM

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

The biggest problem you are probably hitting with compiling is the fact that RHEL/CENT/SL/Fedora do not ship OpenSSL with EC due to a perceived possible patent issue. The first thing I had to do was build openssl into a different directory. Then I had to fix every Makefile.unix to use that directory as the library directory for SSL. You also have to tell it where the library directory for DB4 is. Plus, you have to fix all the boost libraries to be boost-mt. It was a big pain to figure most of this out, but once you get one down, the rest are all pretty much the same steps.

Yes. Recompiling OpenSSL with EC enabled was difficult and took me a long time to figure out. There were too many bad references on the Internet. Once i had that solved my boost gave me trouble. I have not made changes in the makefile. I didn't want to mess things up. I will try one of the repos when I have a chance.

meltingrobot

member

Activity: 63

Merit: 10

Okay, I recompiled things for EL6 now. I haven't tested to see if things work or not yet. But I added the repo info to the top post if anybody wants to try them.

meltingrobot

member

Activity: 63

Merit: 10

Quote from: kaputt on May 22, 2013, 09:04:47 AM

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

The biggest problem you are probably hitting with compiling is the fact that RHEL/CENT/SL/Fedora do not ship OpenSSL with EC due to a perceived possible patent issue. The first thing I had to do was build openssl into a different directory. Then I had to fix every Makefile.unix to use that directory as the library directory for SSL. You also have to tell it where the library directory for DB4 is. Plus, you have to fix all the boost libraries to be boost-mt. It was a big pain to figure most of this out, but once you get one down, the rest are all pretty much the same steps.

kaputt

member

Activity: 70

Merit: 10

I would be interested in this. I have put quite a bit of time into trying to compile different coind like litecoind and yacoind on CentOS with hardly any success. Is there any good from start to finish instructions on this for CentOS? Considering how many web servers run it, it doesn't seem to be getting much attention. I would like to use it for block explorers, pools, nodes for new altcoins and other resources. In the even that I can't get a new altcoin compiled in the first few minutes after launch, it would be nice to have some other way. BTW, I typically never have trouble compiling on Ubuntu, just on CentOS. It could be something about my particular CentOS server, but I'm not about to re-install the OS on that one.

I've never built a repo/package (this is way beyond my ability), but if there is something I can do to help, let me know.

wormbog

hero member

Activity: 561

Merit: 500

Thanks for putting these together!

meltingrobot

member

Activity: 63

Merit: 10

Just an update, I currently have RPMs for Fedora18 built for the following:

bbqcoin
bitbar
bitcoin
elacoin
FeatherCoin
franko
gldcoin
litecoin
Powercoin
ppcoin
terracoin
Worldcoin

meltingrobot

member

Activity: 63

Merit: 10

Quote from: etbbtc on May 14, 2013, 09:37:25 PM

Quote from: meltingrobot on May 14, 2013, 11:13:25 AM

Quote from: etbbtc on May 14, 2013, 09:58:27 AM

Quote from: meltingrobot on May 14, 2013, 09:51:52 AM

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

I don't really have any experience building deb packages. You could probably use alien to convert them possibly. I haven't ran into that particular error yet when building the qt binaries, but I haven't tried to build JunkCoin or PowerCoin yet. I will try to build them next after I finish up elacoin.

Got that,but i would rather compile them myself for safety considerations. I have built elacoin,yacoin,bitcoin without this error. Just JunkCoin and PowerCoin are different from others. Anyway,if once you have encountered and solve this problem please let me know.Thank you very much.

Okay, it looks like in the Makefile, it is pointing to some Windows type locations for some bizarre reason. I'm guessing when they compiled, they had all their libraries in "E:" and compiled against that location. I basically yanked the LIBS and INCLUDE line from one of the working Makefiles(FeatherCoin) which pointed to the right locations for my libraries and used them to replace the LIBS and INCLUDE lines for Powercoin. I ran into some other weird issues where the final g++ line was doubled and I had to manually copy half the line to run it correctly.

Yes. I have built this two coins after simply replace LIBS line with that in FeatherCoin Makefile. Thanks a lot. The Junkcoin and Powercoin Makefile script on github seems designed for windows. Havent noticed weird issues u mentioned. I just continued with my previous make process with out make clean first. Just a few lines showed up and soon the build finished. You r so clever.Thank you very much.

I figured out what caused the double g++ line, it was a bad paste on my part. I'm glad I was able to help you get it compiled on Ubuntu.

etbbtc

member

Activity: 98

Merit: 10

Quote from: Kyune on May 14, 2013, 03:09:18 PM

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

Currently hitting the same problem trying to compile Junkcoin-qt in Ubuntu 12.04.

Refer to the prior meltingrobot reply, he has the solution!

etbbtc

member

Activity: 98

Merit: 10

Quote from: meltingrobot on May 14, 2013, 11:13:25 AM

Quote from: etbbtc on May 14, 2013, 09:58:27 AM

Quote from: meltingrobot on May 14, 2013, 09:51:52 AM

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

I don't really have any experience building deb packages. You could probably use alien to convert them possibly. I haven't ran into that particular error yet when building the qt binaries, but I haven't tried to build JunkCoin or PowerCoin yet. I will try to build them next after I finish up elacoin.

Got that,but i would rather compile them myself for safety considerations. I have built elacoin,yacoin,bitcoin without this error. Just JunkCoin and PowerCoin are different from others. Anyway,if once you have encountered and solve this problem please let me know.Thank you very much.

Okay, it looks like in the Makefile, it is pointing to some Windows type locations for some bizarre reason. I'm guessing when they compiled, they had all their libraries in "E:" and compiled against that location. I basically yanked the LIBS and INCLUDE line from one of the working Makefiles(FeatherCoin) which pointed to the right locations for my libraries and used them to replace the LIBS and INCLUDE lines for Powercoin. I ran into some other weird issues where the final g++ line was doubled and I had to manually copy half the line to run it correctly.

Yes. I have built this two coins after simply replace LIBS line with that in FeatherCoin Makefile. Thanks a lot. The Junkcoin and Powercoin Makefile script on github seems designed for windows. Havent noticed weird issues u mentioned. I just continued with my previous make process with out make clean first. Just a few lines showed up and soon the build finished. You r so clever.Thank you very much.

Kyune

sr. member

Activity: 287

Merit: 250

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

Currently hitting the same problem trying to compile Junkcoin-qt in Ubuntu 12.04.

meltingrobot

member

Activity: 63

Merit: 10

Quote from: etbbtc on May 14, 2013, 09:58:27 AM

Quote from: meltingrobot on May 14, 2013, 09:51:52 AM

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

I don't really have any experience building deb packages. You could probably use alien to convert them possibly. I haven't ran into that particular error yet when building the qt binaries, but I haven't tried to build JunkCoin or PowerCoin yet. I will try to build them next after I finish up elacoin.

Got that,but i would rather compile them myself for safety considerations. I have built elacoin,yacoin,bitcoin without this error. Just JunkCoin and PowerCoin are different from others. Anyway,if once you have encountered and solve this problem please let me know.Thank you very much.

Okay, it looks like in the Makefile, it is pointing to some Windows type locations for some bizarre reason. I'm guessing when they compiled, they had all their libraries in "E:" and compiled against that location. I basically yanked the LIBS and INCLUDE line from one of the working Makefiles(FeatherCoin) which pointed to the right locations for my libraries and used them to replace the LIBS and INCLUDE lines for Powercoin. I ran into some other weird issues where the final g++ line was doubled and I had to manually copy half the line to run it correctly.

etbbtc

member

Activity: 98

Merit: 10

Quote from: meltingrobot on May 14, 2013, 09:51:52 AM

Quote from: etbbtc on May 14, 2013, 09:47:15 AM

Yes i want them on ubuntu,too
And i prefer the manual doc than repositories

By the way,do you know why im encounting this error when i make the junkcoin-qt (and powercoin-qt) on ubuntu 12.04?
What do i miss?

g++: error: E:MinGWliblibws2_32.a: No such file or directory
g++: error: E:MinGWlibliboleaut32.a: No such file or directory
make: *** [junkcoin-qt] Error 1

a lot thanks.

I don't really have any experience building deb packages. You could probably use alien to convert them possibly. I haven't ran into that particular error yet when building the qt binaries, but I haven't tried to build JunkCoin or PowerCoin yet. I will try to build them next after I finish up elacoin.

Got that,but i would rather compile them myself for safety considerations. I have built elacoin,yacoin,bitcoin without this error. Just JunkCoin and PowerCoin are different from others. Anyway,if once you have encountered and solve this problem please let me know.Thank you very much.

Topic: Building RHEL(Cent/SL) and Fedora repositories if people are interested (Read 2991 times)