Topic: BURST mining: Configs, pools, stats etc (Read 3370 times)

mining burst on hard disks is finished long ago. rather would have released a similar coin for mining. and asic devices at once bothered

Better change the equipment as the manipulations with the hardware can kill your PC. Although the price of powerful equipment is very high, mining can be an interesting and profitable business with it.

hi, does anyone know if there is a way to the miner to use more memory

the easy way get started in burst coin http://burstcoin.ro/       stats   50 - 50  and payout 4 times a day

no one would help me with any info or anything until I found that site

if no faucets available someone in this channel will give you burst to get started https://discordapp.com/channels/322068576897073182/324092664813191170

Finally got super clear and detailed explanation!

Thank you!

Clannad, thank you too!

Hi,

When you are plotting a HDD, and you start let's say from 0, it writes X amount of nonces (for example from 0 to 0000050000), then the next HDD nonces needs to start from 0000050001 to X nonces depending on HDD size
(let's say it writes up to 0000100000), and the next one must start from 0000100001 to X.
Each HDD needs to have it's own range of nonces
example:
HDD1: from 0 to 0000050000
HDD2: from 0000050000 to 0000100000
HDD3: from 0000100001 to 0000150000
HDD4: from 0000150001 to 0000200000

The numbers are an example but I hope you get the point.

In order to choose from what number of nonces to start when plotting a HDD using the in wallet plotter (AIO wallet), when you choose the HDD to plot, on the next window check the "expert mode" checkbox, and add the number of nonce you want to start from.

example of plotted HDD file:

your-account-numeric-ID_12000000000000_60544_60544

explanation:

Your account numeric ID is your wallet address in numeric form.
the 12000000000000 is the nonces number that this HDD starts from
the 1st 60544 is the number of the nonces that this HDD have in plots
the 2nd 60544 is the number that has to do with the memory, but in my experience if the two numbers are the same (last 2 numbers on the plot file, 60544 and 60544 in my case) then the plot is optimized.

I hope I explained ok

You should not start from 0, but from the number of plots on the previous disk. Example:
-Disk 1: plots start at 0 and has 13107200 plots
-Disk 2; plots start from 13107200 and has 13107200 plots
-Disk 3: plots start from 26214400 and has 13107200 plots
-Disk 4: plots start from 39321600 and has 13107200 plots
etc...

Question:

I have 8 disks which I plot on fast computer using a wallet internal plotter. When I plotted 5th disk I've got the famous message on plots overlapping. I've deleted plots from 5th disk and assigned to it via Windows new letter which was not used for previous 4 disks (K:). I've plotted again - and got again the same error message.
Both overlapping disks had a plots starting from "0", so I decided to start plotting on 5th disk K from "2". Did plot again - and again got error message.

So - can anybody help to plot 5th and the rest of the disks without overlapping?

Pool (http://pool.burstcoin.space:8124/)

You in a pool or solo?

Most likely. I started mining on the 6th June with 3TB, on the 9th June I added another 3TB. So far I've made 1480 Burst in those 3 weeks (although I did hit a block!).

I went to the burst coin calculator with how many tb I can plot and it said ill be making $60/month..

Based on what ive read about burst, those calls are never right.. so i was asking if I can expect to recieve atleast 50% of that..

It seems you are smart enough to make predictions, if I may ask how do you do the calculations so it can appear 50-60% of 60%?
I am a little confused with your calculations. thanks

Based on previous comments - you most probably will get ~50-60% of $60 before you will be mining with pool 500 blocks. These numbers will depend on pool you are with. Just check their descriptions

That's right shadowlin, I was not aware of this GUI extension of the official wallet, it all makes sense now, thanks a lot !

But from what I see on the forum topic you linked, this GUI uses Janror's CPU plotter, which is what I used to create my plot files that were not optimized... But maybe they made some changes when integrating it into that GUI so I'll give it a try.

And thanks Ahead for your kind explanations

AIO (all in one) wallet is the only wallet you can download from Burst website. So I assumed that he has downloaded the correct one.
I'll provide you with the direct link to download then (check if you have the correct one)
https://sourceforge.net/projects/burstwindowswallet/

I think what Ahead mentioned is the aio wallet.
link:https://forums.burst-team.us/topic/16/burst-client-for-windows-v0-3-9-all-in-one-wallet-plotting-mining

Hi

You don't access your wallet through a browser at "localhost:8125"
The software you are running is the wallet.
Once you open it, there are 2 options on the top menu at the end of the line, "Local wallet" & "Online wallet" (right after the "about" menu)
"Online wallet" is connecting to https://wallet.burst-team.us:8126/index.html using the browser that is INCLUDED in the wallet you have downloaded.
"Local wallet" is running the wallet using the blockchain that has been downloaded (or still downloading) on your local PC.
You can see the bottom menu using both options (Online wallet, and Local wallet)
Check again.

Hi,
OFC I do run the burst wallet (client) on my PC
But when I access my wallet through localhost:8125 I don't have the buttons for plotting, mining, etc...

Look: https://img15.hostingpics.net/pics/464931BURSTwallet.png

Browser?!?!
The wallet you have downloaded needs to be run as a program on your PC.
Run the "Burst Wallet" NOT the "Burst Wallet on the Web"