I'm guessing you are using Windows yes?
Example:
C:\WINDOWS> ROUTE ADD 192.168.1.254 MASK 255.255.255.255 192.168.0.12
blades IP^ ^mask ^computers IP
C:\WINDOWS> PING 192.168.1.254
What is the IP of your computer?
8 )
Topic: Can I get some help with my blade please? - page 3. (Read 2756 times)
Tell me if this is right
route my ip the subnest mask and the gateway # the ip of my blade?
route my ip the subnest mask and the gateway # the ip of my blade?
The commands above with 'route' up to, but not including, the # is the entire command, after that try to ping the blade:
ping 192.168.1.254
If pings reply then you should be able to get to the config page on the blade:
http://192.168.1.254:8000
8 )
Edit: also realize that 192.168.0.12 is an example I chose and might not be your computers actual IP!
ping 192.168.1.254
If pings reply then you should be able to get to the config page on the blade:
http://192.168.1.254:8000
8 )
Edit: also realize that 192.168.0.12 is an example I chose and might not be your computers actual IP!
How would I add that into the CMD I tried Route 192.168.1.254 then what comes next or what is the entire command line I should run so I can get to the configuration page?
OP What o/s are you using?
Your computer needs to route to 192.168.1.0/24 if the blade was indeed reset or configured to the IP you state in your post.
Assign a temporary IP address to your computer in that range and try to ping the blade at 192.168.1.254 or the IP 192.168.1.24 you configured the blade to.
You can also add a temporary static route directly to the blades IP to bypass your router.
Most are using Windows:
In a command prompt issue:
ipconfig # to find the systems IP address: 192.168.0.12 for example.
Then issue:
route add 192.168.1.254 mask 255.255.255.255 192.168.0.12 # for default blade IP
or
route add 192.168.1.24 mask 255.255.255.255 192.168.0.12 # the IP you configured the blade at
This will not be persistent and will go away after a reboot of the computer.
If you are using Linux you should already know how to accomplish the above in your distro.
8 )
Your computer needs to route to 192.168.1.0/24 if the blade was indeed reset or configured to the IP you state in your post.
Assign a temporary IP address to your computer in that range and try to ping the blade at 192.168.1.254 or the IP 192.168.1.24 you configured the blade to.
You can also add a temporary static route directly to the blades IP to bypass your router.
Most are using Windows:
In a command prompt issue:
ipconfig # to find the systems IP address: 192.168.0.12 for example.
Then issue:
route add 192.168.1.254 mask 255.255.255.255 192.168.0.12 # for default blade IP
or
route add 192.168.1.24 mask 255.255.255.255 192.168.0.12 # the IP you configured the blade at
This will not be persistent and will go away after a reboot of the computer.
If you are using Linux you should already know how to accomplish the above in your distro.
8 )
I know this I have set a static Ip of 192.168.1.10 Subnet of 255.255.255.0 gateway of 192.168.1.1 try to connect to my blades configuration page and nothing. I have tried this on more than one pc I just don't understand why it connected to the configuration page once but never again.
can you post a screen cap of your local network settings? If the blade is on 192.168.1.254 you need to also be on the same 192.168.1.X network.
I have done this many times it still won't let me connect again after the first time I connected I have never been able to connect again.
Just reset it and it will go back to 192.168.1.254.... its the 2 pins by the network NIC.
I think the problem is in my network somewhere. Let's start from the beginning I changed my ip address from a 192.168.0.x to a 192.168.1.x ip
I got the blade to connect once seen the configuration page and everything well I changed the ip address to 192.168.1.24 yea I know I should have set it to 192.168.0.24 well I kind of rushed it a little anyways I hit update servers and such changed my Ip back to automatically find an Ip. Well after this no matter what I do go back and change my Ip to a 192.168.1. ip I cannot connect to the blade all I get is an internet explorer cannot open the search page. I have reset my router reset my blade nothing and I mean nothing will get me back to that configuration page. I pressed the reset button on my router and touched the 2 pins on the blade next to the Ethernet port and still same thing cannot connect to search page. This is very frustrating I have had this blade for about 2 weeks and cannot get it to connect to the configuration page again. All help would be appreciated.
I got the blade to connect once seen the configuration page and everything well I changed the ip address to 192.168.1.24 yea I know I should have set it to 192.168.0.24 well I kind of rushed it a little anyways I hit update servers and such changed my Ip back to automatically find an Ip. Well after this no matter what I do go back and change my Ip to a 192.168.1. ip I cannot connect to the blade all I get is an internet explorer cannot open the search page. I have reset my router reset my blade nothing and I mean nothing will get me back to that configuration page. I pressed the reset button on my router and touched the 2 pins on the blade next to the Ethernet port and still same thing cannot connect to search page. This is very frustrating I have had this blade for about 2 weeks and cannot get it to connect to the configuration page again. All help would be appreciated.
Jump to: