I might murder my rig...
I cannot figured out what is wrong with my rig. Everything was working great for two months and now nothing. Not one of my cards will hash, everytime claymore starts it goes to 0 mh/s then freezes. Meaning, my whole system freezes up and I have to hard reset. When isolating the GPUs this still occurs. Does not matter if I have one running or all 6. I am ready to shoot this thing.
I suspect that is it my motherboard or power supply. None of my cards will work on this rig, but they work without issue on other systems.
Claymore will run for no longer than 30 seconds until the entire system freezes. When I restart my system after the hard reset I have a notification of, "Application has been blocked from accessing Graphics hardware."
.
System Info:
-6x MSI RX 570 Armor 4Gb
-6x Victony PCIE x16 Risers.
-1x 128Gb SSD w/ windows 10
-1x 4Gb DDR4 RAM
-1x BioStar TB-250 BTC 6 PCIe
-1X EVGA SuperNOVA 1000W 80+Gold -
1X Intel BX80662G4400
-Running Windows 10
-Running Claymore miner 11.5, ETH only
What I have attempted:
-DDU
-Clean install of the driver
-Pixel Patcher
-Loaded each card up one by one
-Tested the risers
-Reinstalled Windows 10
-This: https://www.drivereasy.com/knowledge/application-blocked-accessing-graphics-hardware-error-windows-10-solved/
-FUCKING EVERYTHING
Any ideas?
