Topic: Can't shake the 100% cpu bug. [Sorta Resolved] - page 2. (Read 5393 times)
If you dont want to switch to linux, try this. http://mion.faireal.net/BES/
Sure thing, good luck!
Thanks much! Imma have to check out Linux soon enough. I made a partition for it already. It's a dedicated miner/goof on the internet rig.
I couldn't get rid of the 100% CPU bug in Windows 7 either. I am now running Linux.
Good walk-through on Ubuntu: https://bitcointalksearch.org/topic/ubuntu-natty-narwhal-1104-mining-guide-howto-7514
I like BAMT if this is a dedicated machine. Burn the image onto a USB stick. Boot up, edit a few lines in the config file and it's ready to mine: https://bitcointalksearch.org/topic/bamt-easy-persistent-usb-key-based-linux-for-dedicated-minersmining-farms-28967
Good walk-through on Ubuntu: https://bitcointalksearch.org/topic/ubuntu-natty-narwhal-1104-mining-guide-howto-7514
I like BAMT if this is a dedicated machine. Burn the image onto a USB stick. Boot up, edit a few lines in the config file and it's ready to mine: https://bitcointalksearch.org/topic/bamt-easy-persistent-usb-key-based-linux-for-dedicated-minersmining-farms-28967
This worked for me
I picked up a 5770 cheap yesterday to run along with a 5830. Noticed 100% cpu usage once I started mining. I had 0% usage when running one card. Seems to be a common problem caused by the openCL drivers. Here's what I did to fix it. Running WIN7 64 bit / Phenom II dual core cpu.
I have one monitor installed to both cards (HDMI / VGA port)
Boot with both cards plugged in. Go to screen resolution display settings and on the drop down menu for multiple displays select " Show desktop only on 1" (for 1st installed card)
start up your miner for that card. Go back to display settings and select "show desktop only on 2" (for 2nd card) Now start up another miner for that card.
I am now getting 0% cpu usage. I'm assuming this will work for Windows XP also. You may have to select extend display or detect first for Windows to recognize both cards before doing the above.
I have one monitor installed to both cards (HDMI / VGA port)
Boot with both cards plugged in. Go to screen resolution display settings and on the drop down menu for multiple displays select " Show desktop only on 1" (for 1st installed card)
start up your miner for that card. Go back to display settings and select "show desktop only on 2" (for 2nd card) Now start up another miner for that card.
I am now getting 0% cpu usage. I'm assuming this will work for Windows XP also. You may have to select extend display or detect first for Windows to recognize both cards before doing the above.
This is what you're looking for as far as that's concerned
https://bitcointalksearch.org/topic/guidehow-to-setup-an-automated-headless-linuxcoin-mining-rig-watchdog-29021
https://bitcointalksearch.org/topic/guidehow-to-setup-an-automated-headless-linuxcoin-mining-rig-watchdog-29021
Switching to linux is fairly simple using linux coin but you're going to need to flash a diffrent bios to the cards if you want to overvolt them
No over volting here. I'm fine with switching, if you could write a brief walkthrough (or point me to one) I'd me very appreciative.
Edit: I'd like a version that I can browse the web on, but at this point I'll take what I can get and work from there.
try 11.9rc some say it fixes the bug but i didnt have any luck with it
fixes it for one GPU, not sure about multiple
Switching to linux is fairly simple using linux coin but you're going to need to flash a diffrent bios to the cards if you want to overvolt them
try 11.9rc some say it fixes the bug but i didnt have any luck with it
fixes it for one GPU, not sure about multiple try 11.9rc some say it fixes the bug but i didnt have any luck with it
er, thats what gave me the Bluescreen (I had 10.9, edited)
try 11.9rc some say it fixes the bug but i didnt have any luck with it
So I was fine on 2.1sdk with 10.4 drivers. Got a new card (2x 5770, not crossfired, no bridge). Reformatted (just to be sure nothing got mixed up).
Ran into a few snags bug got everything running.
Now for the life of me, I can't shake the 100% cpu bug.
I've installed 2.1 with 10.4, but it didn't recognize openCL. Uninstalled that, 11.6 (with sdk that comes with it). It recognizes that, but 100% bug. I uninstall that, and try every mix of 2.1/2.4 with 10.4/11.6 I can imagine. Bug still there. Then I try the 11.9 RC build. Bluescreen on windows.
Reformat.
Then I try 11.6 with the sdk that comes with it (in case the previous install got things mixed up with 2.1) WITHOUT CCC. 100% CPU bug still there.
Can anyone offer any suggestions?
EDIT:
I'm willing to switch to linux if someone wouldn't mind walking me through it.
Ran into a few snags bug got everything running.
Now for the life of me, I can't shake the 100% cpu bug.
I've installed 2.1 with 10.4, but it didn't recognize openCL. Uninstalled that, 11.6 (with sdk that comes with it). It recognizes that, but 100% bug. I uninstall that, and try every mix of 2.1/2.4 with 10.4/11.6 I can imagine. Bug still there. Then I try the 11.9 RC build. Bluescreen on windows.
Reformat.
Then I try 11.6 with the sdk that comes with it (in case the previous install got things mixed up with 2.1) WITHOUT CCC. 100% CPU bug still there.
Can anyone offer any suggestions?
EDIT:
I'm willing to switch to linux if someone wouldn't mind walking me through it.
Jump to: