[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 144.

KL0nLutiy1

newbie

Activity: 88

Merit: 0

Quote from: madMoneyMax on October 30, 2017, 01:07:45 PM

Ok Tried --opengl 1 that didnt work. Im using the basic config "cast_xmr -S [pool server] -u [username or wallet address]"

Thanks anyway

--opencl 1, but not --opengl 1

madMoneyMax

newbie

Activity: 4

Merit: 0

Ok Tried --opengl 1 that didnt work. Im using the basic config "cast_xmr -S [pool server] -u [username or wallet address]"

Thanks anyway

billhinge

member

Activity: 104

Merit: 10

Quote from: madMoneyMax on October 30, 2017, 12:53:21 PM

Blockchain driver are not detected

Greetings all and thanks for the new miner.....

So I hought I would try this new miner on my test rig but I get the error message "Blockchain driver are not detected" when I try to run it.
My system is a B250 Mining expert with 16gb memory and only 2 Vega RX56 in it. Running Win10 Pro and blockchain driver 17.30.1029
The setup works for Ether with Claymore so I dont think its my hardware. Any suggestions?

I had that error until I put --opengl 1 in bat file

billhinge

member

Activity: 104

Merit: 10

Quote from: Ystss on October 30, 2017, 12:38:55 PM

what is "Outdated because of job change"?

3%, you are lucky, I could live with that, I was getting upto 50% rejected even when using high difficulty - 50000+ (computation failed)
(not knocking the developer, just bringing it to his attention)

madMoneyMax

newbie

Activity: 4

Merit: 0

Blockchain driver are not detected

Greetings all and thanks for the new miner.....

So I hought I would try this new miner on my test rig but I get the error message "Blockchain driver are not detected" when I try to run it.
My system is a B250 Mining expert with 16gb memory and only 2 Vega RX56 in it. Running Win10 Pro and blockchain driver 17.30.1029
The setup works for Ether with Claymore so I dont think its my hardware. Any suggestions?

Ystss

newbie

Activity: 32

Merit: 0

what is "Outdated because of job change"?
https://i.imgur.com/INQuCUA.jpg

Jackkyy

full member

Activity: 252

Merit: 100

Hi
if i want run 2x VEGA64 use this settings??

cast_xmr-vega -I 9 --opencl 1 -G 0,1, -S ********

and what hashrate - same with singl???

stueng

newbie

Activity: 6

Merit: 0

@glph3k

Please could you add average hash rate over time to the output, this is useful when tuning because you can see the immediate affect vs the 5min / 10min or whatever average

frostedace

newbie

Activity: 39

Merit: 0

Quote from: oskar_n8 on October 29, 2017, 12:53:02 PM

Quote from: jogar on October 29, 2017, 12:01:34 PM

Hi guys, what is your gpu temp for these settings, Core Frequency: -10.5%, Memory Clock: 1025 MHz, Power Limit: -23% of your rx vega 64? is 75 to 78 temp normal?

For my guess it is too much.
Around 60°C and max 65°C is okay.

Depends on what your ambient temps are.

If you have 64s checkout some guides on modifying the .reg (found somewhere in one of these vega forms). Lowering voltages will help you bring down your temps. Also try setting your fan speed to 3500-4000 rpm.

oskar_n8

newbie

Activity: 37

Merit: 0

Quote from: jogar on October 29, 2017, 12:01:34 PM

Hi guys, what is your gpu temp for these settings, Core Frequency: -10.5%, Memory Clock: 1025 MHz, Power Limit: -23% of your rx vega 64? is 75 to 78 temp normal?

For my guess it is too much.
Around 60°C and max 65°C is okay.

jogar

newbie

Activity: 2

Merit: 0

Hi guys, what is your gpu temp for these settings, Core Frequency: -10.5%, Memory Clock: 1025 MHz, Power Limit: -23% of your rx vega 64? is 75 to 78 temp normal?

billhinge

member

Activity: 104

Merit: 10

Quote from: maxime_inf on October 29, 2017, 04:10:42 AM

Quote from: billhinge on October 29, 2017, 01:06:32 AM

Gave it a try with Vega FE + Blockchain drivers but cards not recognised Angry

Maybe cause of modified BIOS ?!

I got it working, cards are recognised if I put --opengl 1 in config

unfortunately only getting 1450H/s each with 3 FE although at much reduced power/temp/speed (I know the FE can easily do 2150H/s as I have had that with AMD-stak single card but at high power)

grimjaw99

newbie

Activity: 11

Merit: 0

Quote from: dexxa05 on October 29, 2017, 04:52:25 AM

Hi Guys,

how do you get 3-4 Vega working in your mobo?

I have an issues can only get 2 detected by Windows at the same time.

Can someone help me?

Thx in advance

Dexx

Make sure your motherboard bios is up to date, also be sure to change your PCI Express speed to GEN 2 in the bios.

aid77

newbie

Activity: 28

Merit: 0

-I 0 7696 H/s

-I 9 7699 H/s

Is it correct?

BogdanCo

hero member

Activity: 729

Merit: 513

Quote from: aid77 on October 29, 2017, 04:26:16 AM

I have iGPU and 4 Vega56@64

cast_xmr-vega -G 1,2,3,4 -S xmr-eu.suprnova.cc:5222 -u *** -p ***

I have an error

[12:25:44] Selected OpenCL device index 1 doesn't exist.

Why?

If you have IGPU try "--opencl 0"

dexxa05

member

Activity: 87

Merit: 10

Hi Guys,

how do you get 3-4 Vega working in your mobo?

I have an issues can only get 2 detected by Windows at the same time.

Can someone help me?

Thx in advance

Dexx

isbndraw2

newbie

Activity: 2

Merit: 0

Quote from: bostonvex on October 22, 2017, 08:32:31 AM

Quote from: isbndraw2 on October 22, 2017, 04:19:46 AM

Thanks for a new powerful Vega miner! :-)

But for me it doesn't work with my Vega 56.
First of all, i have to explain that my system has as first GPU a Nvidia GTX 970 and second the RX Vega 56.
If i start the miner without the -G parameter, i get the error message:

"compute Driver NOT detected."

and my GTX is listed ("GPU0: GeForce GTX 970 | 13 Compute Units")
If i start with -G 1 (or -G 2, -G 3 and so on), everytime I get the following errer message:

Selected OpenCL device index 1 doesn't exist.

Isn't that scenario supported by this mining software? Anyone have a similar issue?

Thanks.

Use --opencl argument, see this post. https://bitcointalksearch.org/topic/m.23295977

Thank you very much @bostonvex

That worked for me now

aid77

newbie

Activity: 28

Merit: 0

xmr-stak working normal.

aid77

newbie

Activity: 28

Merit: 0

I have iGPU and 4 Vega56@64

cast_xmr-vega -G 1,2,3,4 -S xmr-eu.suprnova.cc:5222 -u *** -p ***

I have an error

[12:25:44] Selected OpenCL device index 1 doesn't exist.

Why?

maxime_inf

newbie

Activity: 27

Merit: 0

Quote from: billhinge on October 29, 2017, 01:06:32 AM

Gave it a try with Vega FE + Blockchain drivers but cards not recognised Angry

Maybe cause of modified BIOS ?!

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 144. (Read 206406 times)