https://i.imgur.com/mO5KMne.png
Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 99. (Read 206409 times)
December 18, 2017, 10:57:04 AM
December 18, 2017, 09:38:33 AM
3 Errors Why ? any ideas ?Press "S" for stats... Will give you "the idea" why you have errors...
December 18, 2017, 08:34:33 AM
4gb ram. 1 vega 56 with 4 rx480s. Followed new guide for the vega. Uninstalled wattman. Using august blockchain drivers. Overdrivent tool. Soft registry settings. 60gb page file. Enable and disable the card on reboots. Run cast-xmr as admin. Everything is stable but the vega starts at 1900 and works its way down to 1300 and stays there. Im testing with just the vega for now. Using claymore the 480s work fine.
Any ideas on how to break 1300H/s?
that's pretty weird. Maybe the Vega doesnt like the 480s much? 1300H/s is the default speed at which Claymore runs on the Vega, or default xmr stak -at least in my case-, or cast xmr when it starts without disabling and enabling the Vega. Also, what's the main GPU? The Vega, the iGPU, a RX 480? Have you enabled large pages support? -I dont mean the Windows virtual memory, but the setting enabled with gpedit-Any ideas on how to break 1300H/s?
Yeah it is weird. It is not temp related. It ran all night, temps at 59C and it is still pegged at 1297-1300. Stable but just stays there. I only get 4-5 lines of 1900 before it settles on 1300. Yes I enable Large Pages Support for administrator and the local user. The primary GPU is one of the 480s.
December 18, 2017, 08:03:52 AM
3 error it's nothing..
Probl is network issues. Miner don't send share etc..
December 18, 2017, 07:03:34 AM
December 18, 2017, 06:15:12 AM
Ubuntu binary wanted
December 18, 2017, 04:38:29 AM
Getting ~900h/s with my rx 570 4GB's
overclocked to 1360/2000. bios modded. not sure about power consumption.
anyone getting better/similar results with the same card or should I be concerned with my cards melting?
I wouldn't say they'll be melting straight away... but you are running high clocks (and probably voltages) indeed. So your power consumption probably is quite accordingly high. I'm running my RX 570's at 1220/1900 on average (undervolted as much as I can) achieving ~800h/s. overclocked to 1360/2000. bios modded. not sure about power consumption.
anyone getting better/similar results with the same card or should I be concerned with my cards melting?
December 18, 2017, 04:16:25 AM
Getting ~900h/s with my rx 570 4GB's
overclocked to 1360/2000. bios modded. not sure about power consumption.
anyone getting better/similar results with the same card or should I be concerned with my cards melting?
overclocked to 1360/2000. bios modded. not sure about power consumption.
anyone getting better/similar results with the same card or should I be concerned with my cards melting?
December 17, 2017, 11:29:59 PM
4gb ram. 1 vega 56 with 4 rx480s. Followed new guide for the vega. Uninstalled wattman. Using august blockchain drivers. Overdrivent tool. Soft registry settings. 60gb page file. Enable and disable the card on reboots. Run cast-xmr as admin. Everything is stable but the vega starts at 1900 and works its way down to 1300 and stays there. Im testing with just the vega for now. Using claymore the 480s work fine.
Any ideas on how to break 1300H/s?
that's pretty weird. Maybe the Vega doesnt like the 480s much? 1300H/s is the default speed at which Claymore runs on the Vega, or default xmr stak -at least in my case-, or cast xmr when it starts without disabling and enabling the Vega. Also, what's the main GPU? The Vega, the iGPU, a RX 480? Have you enabled large pages support? -I dont mean the Windows virtual memory, but the setting enabled with gpedit- Any ideas on how to break 1300H/s?
December 17, 2017, 10:39:07 PM
Out of interest / curiosity... Has anyone tried the Cast XMR miner on any Fury card? Since they're using HBM memory they should be performing pretty well in Cryptonight?... Provided the code is optimised enough for the first gen of HBM just like the current is?
I am also curious of this.
December 17, 2017, 10:35:40 PM
if you want to restart miner x time due hash drop here is simple script .
my miner restart every 30 min
Ps don't close script terminal.
creat bat file and put this.
Edit set commandline and set u config
Thank you for this script!
This makes a lot of difference, because it improve the whole reliability of the system.
Normally I have the software crashing after few hours of working just smoothly as it could do, yet all in a sudden it just stops.
On this way, as it just restart before entering the "crashing zone", it keeps working endlessly.
Moreover I can push performance higher, since it restart after 30 minutes and it does not approach the "crashing zone".
It helps that Cast miner restart it self and get back going full speed in just a few seconds, contrary of STAK, which takes quite some time to restart.
Now I have 4 Vegas and 1 RX580 all together giving 9000 Hs, at the pool.
Sincerely, thank you a lot.
my miner restart every 30 min
Ps don't close script terminal.
creat bat file and put this.
Edit set commandline and set u config
Thank you for this script!
This makes a lot of difference, because it improve the whole reliability of the system.
Normally I have the software crashing after few hours of working just smoothly as it could do, yet all in a sudden it just stops.
On this way, as it just restart before entering the "crashing zone", it keeps working endlessly.
Moreover I can push performance higher, since it restart after 30 minutes and it does not approach the "crashing zone".
It helps that Cast miner restart it self and get back going full speed in just a few seconds, contrary of STAK, which takes quite some time to restart.
Now I have 4 Vegas and 1 RX580 all together giving 9000 Hs, at the pool.
Sincerely, thank you a lot.
December 17, 2017, 07:13:26 PM
Out of interest / curiosity... Has anyone tried the Cast XMR miner on any Fury card? Since they're using HBM memory they should be performing pretty well in Cryptonight?... Provided the code is optimised enough for the first gen of HBM just like the current is?
December 17, 2017, 06:10:29 PM
Right now it is set to 85C in OverdriveNT. Set to 70C ?
You have to set the fan speed to 2500 min, unfortunately it is very loud, but it will keep HBM temperture at ~69C (22C room temp) December 17, 2017, 05:01:47 PM
Check HBM memory temperture with GPU-Z, should be below 70C, otherwise the hashrate drops down.
[/quote]
Right now it is set to 85C in OverdriveNT. Set to 70C ?
December 17, 2017, 03:30:55 PM
what program best to check temps? GPU-z second I start it kills hashrate
December 17, 2017, 03:19:53 PM
I can confirm that, just had a stable 43mh nothing extreme with temp target 69c. Then set the temp target to 75c and no other change, after a few minutes it drops to 38mh just because the temperatures overall have risen that extra amount.
Undervolting is the best choice to get lower temps, even then the HBM is closing in on 20c higher then gpu core temp. The stock cooler seems a bit overloaded on that point.
Undervolting is the best choice to get lower temps, even then the HBM is closing in on 20c higher then gpu core temp. The stock cooler seems a bit overloaded on that point.
December 17, 2017, 03:02:42 PM
Any ideas on how to break 1300H/s?
Check HBM memory temperture with GPU-Z, should be below 70C, otherwise the hashrate drops down. December 17, 2017, 02:17:22 PM
General question: is the GPU numbering in OverdriveNtool the same as in the Cast XMR miner?
I'm trying to troubleshoot and optimise GPUs... But I'm dabbing in the dark as I've got no idea if I'm applying the correct clocks to the respective cards...
I'm trying to troubleshoot and optimise GPUs... But I'm dabbing in the dark as I've got no idea if I'm applying the correct clocks to the respective cards...
No idea about numbering.
I have 0 listed as Polaris and 1 listed as Tahiti in atiflash -i
When I type -G 0 it would give me an error that Tahiti is not supported. When I choose 1 it works.
Not sure how it indexes the GPUs.
Different question,
Do you guys have choppy graph for hashrate?
When using miningrigrentals (good graphs) hashrate is choppy like hell.
Even on pools not using miningrigrentals is very choppy.
December 17, 2017, 02:12:27 PM
4gb ram. 1 vega 56 with 4 rx480s. Followed new guide for the vega. Uninstalled wattman. Using august blockchain drivers. Overdrivent tool. Soft registry settings. 60gb page file. Enable and disable the card on reboots. Run cast-xmr as admin. Everything is stable but the vega starts at 1900 and works its way down to 1300 and stays there. Im testing with just the vega for now. Using claymore the 480s work fine.
Any ideas on how to break 1300H/s?
Any ideas on how to break 1300H/s?
December 17, 2017, 01:51:31 PM
you are using ssl port change this to 13333
Thanks a lot, mate!! Jump to: