Did you do this for fun, or...?
It was for having fun with the bithashminer guy claimed 10th stuff, so chicago made one of these up and boom.
video link for sexiness
Topic: C.C Miner Concept - page 2. (Read 3216 times)
It was for having fun with the bithashminer guy claimed 10th stuff, so chicago made one of these up and boom.
video link for sexiness
^The SP20 is about 2x longer than it is wide or tall, and works well. the back chips run a little warmer but are still at an acceptable temperature
Your way, you'll always have the chips at the back run hotter that the ones at the front.
I'd rotate the boards inside 90 deg with respect to the fans. The shorter board dimension (the height in your case) should be the along the depth of the unit.
Stack them like this :
And use large fans to lower the noise and maximize the air flow.
With the chip power consumption these days, there's no need to have the miners go deep into the racks. It's enough rackspace outhere .. power isn't.
There's no good reason for which a miner should be deeper that this:
I'd rotate the boards inside 90 deg with respect to the fans. The shorter board dimension (the height in your case) should be the along the depth of the unit.
Stack them like this :
And use large fans to lower the noise and maximize the air flow.
With the chip power consumption these days, there's no need to have the miners go deep into the racks. It's enough rackspace outhere .. power isn't.
There's no good reason for which a miner should be deeper that this:
Having fun friend,
Except that this isn't the "Fun" board. It's the Hardware board so......
Having fun friend,
Did you do this for fun, or...?
I was expecting to see a order button. Most renderings have it sadly here.
What exactly are you making a rendering of?
What exactly are you making a rendering of?
Throwing together some 3D Work... had fun doing the first Miner 3D Render wanted to do some more and see what you guys think..
Updated
Updated
Updated
Updated
Jump to: