Topic: CCminer palgin's mod (alexis78 fork) - page 3. (Read 10240 times)
v3 with some gtx 1070 gives about 530sols and after a few minutes... crashs.....
Will start my own thread, can't guarantee I'd be able to keep it up-to-date.
My mod is 1:1 tpruvot's version, except timetravel10 and Equihash algos, maybe there'll be future mods to other algos as well. I won't release Equihash kernel source on GitHub until stable release
Latest releases (and pre-releases):
https://github.com/palginpav/ccminer/releases
Currently really need testers with different equipment to help me debug Equihash kernel momory issues, seems kinda unstable right now.
If you'd like to help, download latest pre-release and post your results here. Check all 3 versions, post speed without overclock, speed with overclock (with core+/mem+ values) and crash output (if occures).
Newbie acc, I know, but I'll try my best
P.S: sorry for my bad English, not my primary language.
My mod is 1:1 tpruvot's version, except timetravel10 and Equihash algos, maybe there'll be future mods to other algos as well. I won't release Equihash kernel source on GitHub until stable release
Latest releases (and pre-releases):
https://github.com/palginpav/ccminer/releases
Currently really need testers with different equipment to help me debug Equihash kernel momory issues, seems kinda unstable right now.
If you'd like to help, download latest pre-release and post your results here. Check all 3 versions, post speed without overclock, speed with overclock (with core+/mem+ values) and crash output (if occures).
Newbie acc, I know, but I'll try my best
P.S: sorry for my bad English, not my primary language.
ubuntu 16.04 build error
make[2]: *** No rule to make target 'x11/bitcore.cu', needed by 'x11/bitcore.o'. Stop.
make[2]: Leaving directory '/home/home2/btx'
Makefile:2113: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/home2/btx'
Makefile:631: recipe for target 'all' failed
make: *** [all] Error 2
As I thought, ~15% of memory-related operations give wrong results (v1 inspection):
https://ibb.co/c6Eb85
Should replace unsafe memory operations another way, need some time to think about workaround for this.
https://ibb.co/c6Eb85
Should replace unsafe memory operations another way, need some time to think about workaround for this.
[2017-05-08 18:19:35] NVML GPU monitoring enabled.
[2017-05-08 18:19:35] Starting on stratum+tcp://eu1-zcash.flypool.org:3333
[2017-05-08 18:19:36] NVAPI GPU monitoring enabled.
[2017-05-08 18:19:36] 1 miner thread started, using 'equihash' algorithm.
[2017-05-08 18:19:36] Failed to get extranonce2_size
[2017-05-08 18:19:36] Failed to get extranonce2_size
[2017-05-08 18:19:36] ...retry after 30 seconds
[2017-05-08 18:20:06] Failed to get extranonce2_size
[2017-05-08 18:20:18] Failed to get extranonce2_size
[2017-05-08 18:20:18] ...retry after 30 seconds
[2017-05-08 18:19:35] Starting on stratum+tcp://eu1-zcash.flypool.org:3333
[2017-05-08 18:19:36] NVAPI GPU monitoring enabled.
[2017-05-08 18:19:36] 1 miner thread started, using 'equihash' algorithm.
[2017-05-08 18:19:36] Failed to get extranonce2_size
[2017-05-08 18:19:36] Failed to get extranonce2_size
[2017-05-08 18:19:36] ...retry after 30 seconds
[2017-05-08 18:20:06] Failed to get extranonce2_size
[2017-05-08 18:20:18] Failed to get extranonce2_size
[2017-05-08 18:20:18] ...retry after 30 seconds
On zpool I am getting the same hashrate as @miner, but v2 and v3 crash with illegal memory access error very fast ( usually lasts less than 2 mins), v1 works well so far.
v1 635 H/s with same settings as above.
v1 635 H/s with same settings as above.
will be compiling and testing sometime this week if we can ...
new cards are coming this week also - so will check the miner on those also ...
#crysx
new cards are coming this week also - so will check the miner on those also ...
#crysx
on 1070 version 1 gives ~560 h/s
versions 2 and 3 gives 580 and 610 h/s, but often crashes , and pool hashrate same as version 1
oops, version 1 crashed too ))
versions 2 and 3 gives 580 and 610 h/s, but often crashes , and pool hashrate same as version 1
oops, version 1 crashed too ))
How fast is it on the gtx 1070? The fastest private kernels are doing 550 with low power.
I appreciate any feedback, thank you! For me pool-side speed correlates in time with miner shown, but it crashes in 15-30 mins from start, not fully safe memory operations, need to check block-sync again and again and find another way to perform less operations with more stability. Anyway, I'm still learning and this is not practically used instrument at that moment
As I have already wrote in PM. I have tested two versions on the MSI GTX 1080, mining hush on Yiimp. power limit 65% ( 150W), +160 core clock (2088) , +537 Mhz ( 5049) memory.
Getting about 820 sols with v3, 730 sols with v2. Both stable, but on pool after 30 mins of mining still showing under 400 sols on pool for version 3. For v2 350 sols.
Also according to GPU-Z it seems that there is only 80-86% GPU load so running more instances would probably help?.
Getting about 820 sols with v3, 730 sols with v2. Both stable, but on pool after 30 mins of mining still showing under 400 sols on pool for version 3. For v2 350 sols.
Also according to GPU-Z it seems that there is only 80-86% GPU load so running more instances would probably help?.
watching this! thanks!
will be testing on linux as soon as sources are available.
will be testing on linux as soon as sources are available.
Will start my own thread, can't guarantee I'd be able to keep it up-to-date, but anyway.
My mod now is based on alexis78 version, but lots of algos reworked.
Currently supported algos:
blake
decred
blakecoin
gostd
vcash
blake2s
keccak
lyra2
lyra2v2
skein
skein2
skunk
nist5
quark
qubit
x11
c11
sib
x11evo
x13
x14
x15
x17
whirlpool
lbry
neoscrypt
sia
myr-gr
veltor
Latest releases (and pre-releases):
https://github.com/palginpav/ccminer/releases
My mod now is based on alexis78 version, but lots of algos reworked.
Currently supported algos:
blake
decred
blakecoin
gostd
vcash
blake2s
keccak
lyra2
lyra2v2
skein
skein2
skunk
nist5
quark
qubit
x11
c11
sib
x11evo
x13
x14
x15
x17
whirlpool
lbry
neoscrypt
sia
myr-gr
veltor
Latest releases (and pre-releases):
https://github.com/palginpav/ccminer/releases
Jump to: