Author

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 113. (Read 2347601 times)

member
Activity: 91
Merit: 10
It's profitable to use spmod on a large farm, and it's hard for an individual user to recover the cost
full member
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
you are saying that current  open source miner on   1080ti   does about 550?
I guess with claims  like that its not so hard to sell mods

I am not selling anything I just tried the 1070ti on different exe files and they all do around 500, but perhaps you can point me in the right direction here. Where can I find the miner that does 1700? I am using cuda 9.0 and the latest driver.

here you are! you can see two gtx1070ti are working on 1360kh/s


and on gtx 1080ti are doing about 1670 kh/s. can you make really better then that?
Tell us gtx 1080ti settings to get 1670, please.

sp doesn't have a 1080ti, too poor, nobody support his work, please "donate"
sr. member
Activity: 954
Merit: 250
you are saying that current  open source miner on   1080ti   does about 550?
I guess with claims  like that its not so hard to sell mods

I am not selling anything I just tried the 1070ti on different exe files and they all do around 500, but perhaps you can point me in the right direction here. Where can I find the miner that does 1700? I am using cuda 9.0 and the latest driver.

here you are! you can see two gtx1070ti are working on 1360kh/s


and on gtx 1080ti are doing about 1670 kh/s. can you make really better then that?
Tell us gtx 1080ti settings to get 1670, please.
full member
Activity: 201
Merit: 100
I can confirm 1070 doing over 1300kH neoscrypt if You don't mind high power consumption.
Just use klaust miner and intensity -i 17.6
My clocks are around 2000Mhz gpu and 4500Mhz vram.



full member
Activity: 728
Merit: 106
1) I've known about the p0 state and one of the original people who reported it when mining with 970s. It was either in this thread or Epsylons.

2) Forgive me, but I'm not going to believe your absolute stability on all your rigs for weeks/months/years, just like adf earning $720 per day mining with a 1070. I have enough rigs to figure out it's not worth the time or the effort of forcing p0.

3) You already know what +500 is based on your own knowledge. If you aren't forcing p0 you would be p2 and 200 lower then p0. That would be 4500. Weird we're at the same memory speed only I don't need to use p0.
1) I thought it is impossible, but if you know about p0 and don't use it than you are more retarded than I thought before. Grin
2) Of cause you dont believe. You believe only in 2.5$ - cause you can't even imagine more. Grin
3) You say that you have rigs but you don't know that different GPUs has different clocks as default? Oh yes - you won't believe that - it's impossible just because you think so. Grin
full member
Activity: 420
Merit: 108
Smartcash sp-mod is very profitable right now.. (keccak)

0.05btc

900mhash 1070
1650.mhash 1080ti
yes, maybe it will be profitable few hours per week.
legendary
Activity: 1764
Merit: 1024
The problem is there's probably 50+% of nvidia users out there that mine in P2 mode and just don't know how to force the miner to P0. So +400 will only be something like "+200 from stock" for a lot of folks. Smiley

That's basically a OC. Also not sure why you'd go through the trouble of forcing p0 when you could just OC the memory right out of the gate. Less messing around. Maybe makes your OCD feel better? It doesn't seem to increase voltage to the memory and it doesn't allow you to OC the memory further.
Of cause you don't know. One of the reasons you are doing 2.5$ with 1070  Grin

You are an absolute dumbass. I've known about the p0 state and one of the original people who reported it when mining with 970s. It was either in this thread or Epsylons.

Without a load on the GPU it shouldn't cause a crash. If you're getting crashes from +200 without a load you're already unstable.
I've no idea what exactly happens when that +200 jump occurs, maybe there is some kind of load in that moment. Maybe some calculations are still being done when the miner is closing (if there was no load at that moment, why would it go to p0 after all and not to some low-power mode?). I've had very stable rigs hashing for 24+ hours but crashing when the miner is closed (and then, after forcing cuda apps to run in p0 on those systems, they're stable at those clocks for days/weeks). I've seen quite a few similar reports from other users, afaik it's a relatively common issue.

There isn't. It goes p0 because the load is removed before the clocks go into low power state.

Forgive me, but I'm not going to believe your absolute stability on all your rigs for weeks/months/years, just like adf earning $720 per day mining with a 1070. I have enough rigs to figure out it's not worth the time or the effort of forcing p0, if you're crashing on +200 on exit you're not stable to begin with or you have an extreme outlier. It's neither capable of going +200 without crashing without a load and still somehow capable of tolerating higher clocks to begin with.


lol this isn't open for debate, although cute that you think it is, you have to defend your third world brethren. The average person earn $10 per year in your country, if you earn $100 per year, you're earning 10x what they're earning, that would be considered 'rich' by comparison to people in their country. Same as if you earned $200,000 in the US compared to $20,000 per year you'd be considered pretty rich (although that depends on where you live in the US).

The whole 'rich' term is subjective. There is no baseline for 'rich'. You can live in Uganda and say you're rich because you're earning 100x the average citizens income, but that's still peanuts depending on where else you're living in the world.


And again,.... You have no idea what You are talking about. Prices for expensive and luxury things here are HIGHER than in the countries with higher GDP.


LOL... And 'rich' which is a completely subjective term relates to how much money you have and make compared to your average money making countryman, not what you buy with it. You could buy 20 stocks of celery instead of barely being able to afford one and not be starving, depending on where you live that's 'rich' you silly goose. When you compare your buying power on a global scale you're no longer talking about being rich anymore and it was one of my original points. 'Rich' depends on where you live compared to the GDP per capita, which is why someone can claim to be rich, but isn't remotely rich when compared to the rest of the world.

Also I hear you can get things shipped pretty much anywhere. 'shipping is so expensive', look into a relay service. Solving basic problems for the affluent, you're welcome.

Also even if you live in a first world country, buying things like electronics for instance can be 'more expensive' then other countries simply due to demand, taxes, and where they're shipped. For instance buying GPUs in the US vs Germany or France or really anywhere in Euroland.

No he is right. Forcing P0 is important for memory intensive algos, you will never get high OC stable unless you force it. I dont know what +500 is, but every 1070 card brand and type of memory runs easily on 4400 MHZ, the better ones, samsung especially can go over 4500 being stable all the time.

You already know what +500 is based on your own knowledge. If you aren't forcing p0 you would be p2 and 200 lower then p0. That would be 4500. Weird we're at the same memory speed only I don't need to use p0.

If you mine Ethereum look into low intensity dag generation, I'm the person who got Claymore to add it to his miner. Maybe after playing around with it for a bit you'll figure out why.
full member
Activity: 308
Merit: 100
The alexis miner is doing 450 KHASH on the 1070ti, so you need a dev to change the code to do the expected 1100-1400 Khash. I am reaching 1300+ on the gtx 1070 with my cuda 9.0 mod and only 550 on the 1070ti.
$750 dollars is nothing. Devs need money too.
1360 with klausT on 1070 Ti, not extreme clocks, locked at 912 mV as one of the cards struggled on 900, 1898 Mhz (if you lower the clock you can probably do more with mem, but I'm on autoswitch with Lyra2rev2 and it needs high core and doesn't need mem, so I chose the middle road). Alexis does just a bit less, not sure why is that yours doesn't do it.

And yes, 0.05 BTC was OK-ish before, now it's $750 and profitability changes in a day or two so you might never get to profit as much from the difference. Profitability in BTC dropped as a whole. The 5 minute dev-fee kills auto-switching profitability, but it's in the Bitcore mod I paid for, and I never agreed to have this in my miner.

I believe nvidia inspector has this option.
One of the versions. Google helps Smiley
Alexis does just a bit less, not sure why is that yours doesn't do it.

this is how you sell mods
hero member
Activity: 675
Merit: 514
Hi. Appreciate if u can help me as i was trying to bring my 1070 neoscrypt to ~1100 (what i read).
i started with ccminer tpruvot latest version on win X64. i got ~850 Kh/S.
i now downloaded ccMiner release 8.15(KlausT-mod) and while running i get error "Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1432: Out of memory".
It may be i'm doing begginer's mistakes (i'm quite sure) but i'll really appreciate help.. (what should i do get my 1070 to ~1100 Kh/s neoscripts).
Reduce the intensity. -i 17.5 or something like that should work.
sr. member
Activity: 463
Merit: 250
Smartcash sp-mod is very profitable right now.. (keccak)

1650.mhash 1080ti
As always you "forget" to mention that it's "overclocked like there's no tomorrow" 1080 ti.  Grin And an average undervolted 1080 ti is more like 1450-1500 MH/s.

Yeah the 1080tis have a problem with cooling in such a state Smiley
legendary
Activity: 1106
Merit: 1014
Smartcash sp-mod is very profitable right now.. (keccak)

1650.mhash 1080ti
As always you "forget" to mention that it's "overclocked like there's no tomorrow" 1080 ti.  Grin And an average undervolted 1080 ti is more like 1450-1500 MH/s.
legendary
Activity: 1510
Merit: 1003
Smartcash sp-mod is very profitable right now.. (keccak)

0.05btc

900mhash 1070
1650.mhash 1080ti
don't forget nist5 and bulwark )))
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
Smartcash sp-mod is very profitable right now.. (keccak)

0.05btc

900mhash 1070
1650.mhash 1080ti
full member
Activity: 196
Merit: 100
The alexis miner is doing 450 KHASH on the 1070ti, so you need a dev to change the code to do the expected 1100-1400 Khash. I am reaching 1300+ on the gtx 1070 with my cuda 9.0 mod and only 550 on the 1070ti.
$750 dollars is nothing. Devs need money too.
1360 with klausT on 1070 Ti, not extreme clocks, locked at 912 mV as one of the cards struggled on 900, 1898 Mhz (if you lower the clock you can probably do more with mem, but I'm on autoswitch with Lyra2rev2 and it needs high core and doesn't need mem, so I chose the middle road). Alexis does just a bit less, not sure why is that yours doesn't do it.

And yes, 0.05 BTC was OK-ish before, now it's $750 and profitability changes in a day or two so you might never get to profit as much from the difference. Profitability in BTC dropped as a whole. The 5 minute dev-fee kills auto-switching profitability, but it's in the Bitcore mod I paid for, and I never agreed to have this in my miner.

I believe nvidia inspector has this option.
One of the versions. Google helps Smiley
sr. member
Activity: 463
Merit: 250
Also not sure why you'd go through the trouble of forcing p0 when you could just OC the memory right out of the gate. Less messing around. Maybe makes your OCD feel better? It doesn't seem to increase voltage to the memory and it doesn't allow you to OC the memory further.
Because there's a bug (or is that a feature?) in nvidia drivers or mining software that makes the memory clock jump ~ 200 MHz up when you close the miner's window. I didn't spend too much time investigating it, so maybe it's not all driver versions and/or not all miners that do that, but every single one I tried behaved that way. Let's say you've got gtx 1080 and your stock memory clock is supposed to be 5000. When you set OC to +400 (in MSI AB, for example), and run the miner, your actual memclock will be ~ 5200 or smth like that, and not 5400 (because cuda apps run in p2 instead of p0). Which would be ok, you could just add +600 instead to reach the clock you wanted (5400)... except when you close the miner, the memclock will jump to 5600 for a brief moment. And that is a problem - if you're pushing you memory overclock close to its max, then you'll get the driver crash in that short moment when the clock jumps to +200 more.

If you force cuda apps to run in p0 mode, then that jump is gone, the memory clock stays at whatever you set it to even when you close the miner window. And yeah, it does allow you to OC memory further, because without that weird jump you don't have to leave so much headroom for that brief clock increase and can set higher memclock.

Without a load on the GPU it shouldn't cause a crash. If you're getting crashes from +200 without a load you're already unstable. For instance you can do +800 on the desktop for pretty much any GPU and it wont crash. I would say +1000, but that's very close to absolute maximum and may crash just by sneezing at it.

+500 for instance is a pretty universally accepted memory OC across all my gpus when mining Ethereum (I haven't OC'd memory while mining Cryptonote or NeoS yet, so that might change). I was running them at p2. They don't crash even though they went +700 upon exiting the miner. However. If I ran +700, almost none of them could run the miner at that, not just when closing the miner.

Maybe you're running super bleeding edge, so I guess, but for all intents and purposes most people aren't going to run into that.
No he is right. Forcing P0 is important for memory intensive algos, you will never get high OC stable unless you force it. I dont know what +500 is, but every 1070 card brand and type of memory runs easily on 4400 MHZ, the better ones, samsung especially can go over 4500 being stable all the time.
full member
Activity: 728
Merit: 106

lol this isn't open for debate, although cute that you think it is, you have to defend your third world brethren. The average person earn $10 per year in your country, if you earn $100 per year, you're earning 10x what they're earning, that would be considered 'rich' by comparison to people in their country. Same as if you earned $200,000 in the US compared to $20,000 per year you'd be considered pretty rich (although that depends on where you live in the US).

The whole 'rich' term is subjective. There is no baseline for 'rich'. You can live in Uganda and say you're rich because you're earning 100x the average citizens income, but that's still peanuts depending on where else you're living in the world.


And again,.... You have no idea what You are talking about. Prices for expensive and luxury things here are HIGHER than in the countries with higher GDP.

I think he never knows what he is talking about.
He understand that his own IQ is not good at all. He cant even imagine that it is more than possible to make 3.5Roi in 5 months. I think he will kill himself if I tell him that there is a guy who made 3BTC the same time with 2GPU only (of course it was not pure mining but anyway).
So the only thing to increase his sense of selfgreatness is the fact that he was born in the country with high GDP. The mental abilities of that person are so miserable that he can't even understand that it isn't his own attainment and there in nothing to be proud of. Grin

P.S. Oh forgot to say - guy is from low GPD country. Grin
full member
Activity: 420
Merit: 108
newbie
Activity: 1
Merit: 0
Hi. Appreciate if u can help me as i was trying to bring my 1070 neoscrypt to ~1100 (what i read). i started with ccminer tpruvot latest version on win X64. i got ~850 Kh/S. i now downloaded ccMiner release 8.15(KlausT-mod) and while running i get error "Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1432: Out of memory". It may be i'm doing begginer's mistakes (i'm quite sure) but i'll really appreciate help.. (what should i do get my 1070 to ~1100 Kh/s neoscripts).
sr. member
Activity: 736
Merit: 262
Me, Myself & I

lol this isn't open for debate, although cute that you think it is, you have to defend your third world brethren. The average person earn $10 per year in your country, if you earn $100 per year, you're earning 10x what they're earning, that would be considered 'rich' by comparison to people in their country. Same as if you earned $200,000 in the US compared to $20,000 per year you'd be considered pretty rich (although that depends on where you live in the US).

The whole 'rich' term is subjective. There is no baseline for 'rich'. You can live in Uganda and say you're rich because you're earning 100x the average citizens income, but that's still peanuts depending on where else you're living in the world.


And again,.... You have no idea what You are talking about. Prices for expensive and luxury things here are HIGHER than in the countries with higher GDP.
full member
Activity: 349
Merit: 102
Memory is the same across all GPUs except for some weirdo models, so +400 is the same for everyone.
The problem is there's probably 50+% of nvidia users out there that mine in P2 mode and just don't know how to force the miner to P0. So +400 will only be something like "+200 from stock" for a lot of folks. Smiley


How do you force 10 series cards into p0 mode?

I believe nvidia inspector has this option.

Hmm afaik that only works for 9 series gpus. But I'm keen to know if there is a way for 10 series.
Jump to: