Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1214. (Read 2347597 times)
Started ccminer-30-35-50-52 v1.5.0 now. Getting "Stratum extranonce answer id was not correct!" at statup, but hashes well so far. Need to run a few hours to see pool graph.
Allright so just tested release8 for a couple of hours. Pool seems to be allright as it shows approx. normal hashrate there.
ccminer gives 15.2 mh. graph looks better than for release13/14:
Will test now the 1.5.0 release from the other thread.
ccminer gives 15.2 mh. graph looks better than for release13/14:
Will test now the 1.5.0 release from the other thread.
SP just sent you 2 dark coin thank you 
You can try the exe from this thread:
https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064
Does it report bether hash on the pool?
https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064
Does it report bether hash on the pool?
Thanks for the quick reply. I get 100 % accepts (yay!!!). Previous versions gave me an average of maybe 99.9 %. Pool has vardiff and PROP payouts.
https://www2.coinmine.pl/drk/
I use 2x GTX 970 @ 1500 mhz.
Remember not to have that problem with previous versions, but will doublecheck that later to be sure.
https://www2.coinmine.pl/drk/
I use 2x GTX 970 @ 1500 mhz.
Remember not to have that problem with previous versions, but will doublecheck that later to be sure.
What is the reject rate in %. What is the difficulty you mine on. (Is the pool using vardiff?)
Use a high diff if possible. some pools support to set the diff manually in the password -p d=x.xxx
Are you swithcing between pools? Is the pool paying PLNS or PROP?
Wich pool?
I have tried with Wafflepool, Yaamp, nicehash, and westhash. Seems to work fine there.
another tip:
High intesity, use high diff.
Low intensity use low diff.
For a 750ti rig try the following parameters:
ccminer.exe -q -r 3 -R 10 -a x13 --no-color -o stratum+tcp://yaamp.com:3633 -u xxx -p xxx
Use a high diff if possible. some pools support to set the diff manually in the password -p d=x.xxx
Are you swithcing between pools? Is the pool paying PLNS or PROP?
Wich pool?
I have tried with Wafflepool, Yaamp, nicehash, and westhash. Seems to work fine there.
another tip:
High intesity, use high diff.
Low intensity use low diff.
For a 750ti rig try the following parameters:
ccminer.exe -q -r 3 -R 10 -a x13 --no-color -o stratum+tcp://yaamp.com:3633 -u xxx -p xxx
Thanks for fixing the hw sp_.
Still having the same problems as a few previous posters: the pool does not show the full hashrate.
ccminer shows 16 mh average. pool shows the following:
first half is release13, second release14.
Still having the same problems as a few previous posters: the pool does not show the full hashrate.
ccminer shows 16 mh average. pool shows the following:
first half is release13, second release14.
sp_ does this ccminer support neoscrpyt?
Not yet. Noboby has ported it yet.
i remember djm, was working on it long time ago
A suggetion sp_:
How about merging your and tpruvot's threads with the original CCminer thread, given that Christian updates the OP a bit to highlight other contributers since April 2013? I'll ask the same to Christian and tpruvot.
One CCminer thread would be much easier to follow then several as the case is now.
How about merging your and tpruvot's threads with the original CCminer thread, given that Christian updates the OP a bit to highlight other contributers since April 2013? I'll ask the same to Christian and tpruvot.
One CCminer thread would be much easier to follow then several as the case is now.
sp_ does this ccminer support neoscrpyt?
Not yet. Noboby has ported it yet.
cgminer does neo/nvidia
How does nvidia compare to amd on cgminer?
I get 25KH/s with cgminer 3.7.8 for neoscrypt by vehre (and wolf) on Win 7 with a 550ti. I have not been able to compile the same version on Linux and run with a 6x750ti rig. It will compile, and run, but only produces HW errors for me.
Cgminer is not written to take advantage of Cuda architecture. It supposedly uses OpenCL for Nvidia. The Cuda masters have not been producing any Cuda optimized code for neoscrypt. --scryptr
sp_ does this ccminer support neoscrpyt?
Not yet. Noboby has ported it yet.
cgminer does neo/nvidia
How does nvidia compare to amd on cgminer?
sp_ does this ccminer support neoscrpyt?
Not yet. Noboby has ported it yet.
cgminer does neo/nvidia
Cuda error in file 'Z:/ccminer/x11/cuda_x11_simd512.cu' in line 630 : out of mem
ory.
Cuda error in file 'Z:/ccminer/x11/cuda_x11_simd512.cu' in line 630 : out of mem
ory.
Cuda error in file 'Z:/ccminer/x11/cuda_x11_simd512.cu' in line 630 : out of mem
ory.
ory.
Cuda error in file 'Z:/ccminer/x11/cuda_x11_simd512.cu' in line 630 : out of mem
ory.
Cuda error in file 'Z:/ccminer/x11/cuda_x11_simd512.cu' in line 630 : out of mem
ory.
sp_ does this ccminer support neoscrpyt?
Not yet. Noboby has ported it yet.
Select x86 and not x64.
How do you compile your code to work with 750 ti ?
Did you reemember to select "Release" in the build menu of visual studio 2013? The github version should compile and run on the 750ti without any changes.
yeah I did.
went to https://github.com/sp-hash/ccminer
downloaded ZIP (button RH side in the middle)
loaded ccminer.sln into vs 2013
selected release.
configuration manager set to x64
then goto "BUILD"
Then "build solution"
wait.....
after sucessfully building I then looked in
ccminer-windows\x64\release\
found ccminer.exe 8,674KB in size
copied ccminer.exe to a fresh folder and tried to run it with a .bat that I was using with one of your releases and got an error "ccminer stopped working"
This was built from your github on the 28th/Nov
not sure what I'm doing wrong
sp_ does this ccminer support neoscrpyt?
New build from github.
-x15 fixed for 970/980 cards
-less GPU xx result for xx is not in range (hardware)
http://www.filedropper.com/release13
Can you update to tpruvot's latest API? (Like poolinfo etc). I'm using that in my monitoring tool ^^-x15 fixed for 970/980 cards
-less GPU xx result for xx is not in range (hardware)
http://www.filedropper.com/release13
Nice work btw! Seems like my donation earlier was worth it ^^"
Too bad my gtx760 doesn't work anymore
Guess you kicked out compute 3.0 I started on the merge to tvpouet 1.5.1, but there was so many files and I got lazy. I tested the latest version on compute 3.0 (gtx 650) and it crashed. I will look into it.
Donations are welcome. More hash is comming
How do you compile your code to work with 750 ti ?
Did you reemember to select "Release" in the build menu of visual studio 2013? The github version should compile and run on the 750ti without any changes.
Ah yeah cheers guys
Was still waking up
Was still waking up
Jump to: