CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 283.

Deki1904

sr. member

Activity: 490

Merit: 250

Quote from: Deki1904 on July 26, 2017, 09:45:28 AM

Quote from: Slava_K on July 26, 2017, 09:41:48 AM

Quote from: Deki1904 on July 26, 2017, 09:22:12 AM

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

Thanks. It seems it's always 1 card....

One question, is there a tool that restart automatically ccminer if crash and any monitoring tools for win 10 an ccminer?

It seems the power limit didn't apply for the cards... Using msi afterburner

Deki1904

sr. member

Activity: 490

Merit: 250

Quote from: Slava_K on July 26, 2017, 09:41:48 AM

Quote from: Deki1904 on July 26, 2017, 09:22:12 AM

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

Thanks. It seems it's always 1 card....

One question, is there a tool that restart automatically ccminer if crash and any monitoring tools for win 10 an ccminer?

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: Deki1904 on July 26, 2017, 09:22:12 AM

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

strannik951159

member

Activity: 112

Merit: 10

📌[ANN]📌👍👍👍

Quote from: sp_ on July 26, 2017, 07:42:28 AM

I have optimized all hashing algos. But I keep most of my work private in my growing farm..

equihash sp-mod#1 80% tdp.:

Around 440 on the 1070 with 2 threads per gpu.

ewbf 0.3.4b

Gives 490 sol per 1070

To buy a mod you need at least 530 sol with 1070

Rashkae

full member

Activity: 196

Merit: 100

sp_, please check PM

Deki1904

sr. member

Activity: 490

Merit: 250

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: dt8666 on July 26, 2017, 09:02:05 AM

sp. for sigt miner, do i need to update to latest 384.97? I m on 382.53 now.

yes. if you want more speed.

dt8666

full member

Activity: 302

Merit: 102

Mining with noise and without noise is all possibl

Quote from: sp_ on July 26, 2017, 08:57:43 AM

Quote from: du44 on July 26, 2017, 08:50:29 AM

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

I plan do to a fix in spreadcoin and cryptonite for the latest drivers later. Free update to the donators. I think the crash is caused by buffers that are not alligned correctly. A bug in the driver, but can be fixed by adjusting the code

sp. for sigt miner, do i need to update to latest 384.97? I m on 382.53 now.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: du44 on July 26, 2017, 08:50:29 AM

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

I plan do to a fix in spreadcoin and cryptonite for the latest drivers later. Free update to the donators. I think the crash is caused by buffers that are not alligned correctly. A bug in the driver, but can be fixed by adjusting the code

D8V1D

full member

Activity: 163

Merit: 100

Quote from: du44 on July 26, 2017, 08:01:38 AM

I looked for my rigs on 1080 ti's and i see, what speeds in the sp-mod 1 and sp-mod 3 the same after 10+ minutes of work.
sp, i think what you need to buy this gpu for easier tweaking and testing Wink

1080 Ti FE - 70% TDP

Mod 1 - 46 MH/s
Mod 2,3 - 48 MH/s

If you're using Mod 3, make sure to use the latest drivers or you'll lose 0.70 MH/s.

du44

full member

Activity: 251

Merit: 100

Quote from: sp_ on July 26, 2017, 08:14:09 AM

Quote from: du44 on July 26, 2017, 08:01:38 AM

I looked for my rigs on 1080 ti's and i see, what speeds in the sp-mod 1 and sp-mod 3 the same after 10+ minutes of work.
sp, i think what you need to buy this gpu for easier tweaking and testing Wink

Does your card trottle? Usually power or temperature related. You can open gpu_z and check the pcap reason. Did you upgrade to the latest driver? 384.97 give a small boost.

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

qwep1

hero member

Activity: 610

Merit: 500

Quote from: DuvajBalone on July 26, 2017, 08:39:38 AM

Please report this to moderators https://bitcointalksearch.org/topic/--2047398 fu**ing newbies trying to sell sp_ work

done

DuvajBalone

full member

Activity: 137

Merit: 100

Please report this to moderators https://bitcointalksearch.org/topic/--2047398 fu**ing newbies trying to sell sp_ work

muddge

newbie

Activity: 9

Merit: 0

sp_

Please check inbox for PM requesting SP-MOD.

Rokujou

newbie

Activity: 23

Merit: 0

Can someone tell me what is the best intensity for Gigabyte Aorus 1080ti?
Thanks in advance.

Rashkae

full member

Activity: 196

Merit: 100

sp_, I'll happily pay the fee/the 2% share IF it's really 10% faster...

AND you PM me tips and tweaks for my card to maximize output (which increases your take too). Wink

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: du44 on July 26, 2017, 08:01:38 AM

I looked for my rigs on 1080 ti's and i see, what speeds in the sp-mod 1 and sp-mod 3 the same after 10+ minutes of work.
sp, i think what you need to buy this gpu for easier tweaking and testing Wink

Does your card trottle? Usually power or temperature related. You can open gpu_z and check the pcap reason. Did you upgrade to the latest driver? 384.97 give a small boost.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: polylogic on July 26, 2017, 08:05:38 AM

Quote from: sp_ on July 26, 2017, 07:56:08 AM

You will need to type in the email in the batfile. and the fee will be there always. But if signatum release #4 have a 10% boost. You get 8% faster than the leaked version, and I keep 2%.

very nice, donators still get the free update ?

yes

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: sp_ on July 26, 2017, 07:56:08 AM

You will need to type in the email in the batfile. and the fee will be there always. But if signatum release #4 have a 10% boost. You get 8% faster than the leaked version, and I keep 2%.

very nice, donators still get the free update ?

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: crytotronik on July 26, 2017, 07:40:51 AM

Quote from: polylogic on July 26, 2017, 07:31:44 AM

i just got my skunkhash miner.
right out of the box without tweaking (still equihash config)
i got

1060 3gb = ~15mh
1080ti 11gb = ~25mh

ill start tweaking in 1 hour, hope i get to 50(60) with my 1080ti.

You have a Skunk optimized mod and you get better hashrate on Equihash also? So there are at least more algos included than Skunk only?

@SP: your next mod is to buy for 0.05 plus there is a fee? Or you can buy it without fee or use it for free but with Dev fee?

actually my data was wrong. its out of the box with intensity 15
and i was mining hush (equihash) in efficency mode. now im on skunkhash testing sp_ mod

here are my current numbers with 70% powerlimit & i 22-26

1060 3gb 14-16mh
1070 6gb 24mh
1080ti 11gb 40-43mh

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 283. (Read 2347601 times)