all the amd that mining eth at moment will move to other dagger coins ,amd is up to 6 time slower compared to nvidia to every other algo.
nvidia is best deal atm especially in efficency... and believe me ... i have amd too
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 332. (Read 2347601 times)
There are currently roughly 1.2M~ 480s mining Ethereum at the moment. There is no way we'll survive if Eth goes PoS or disappears.
There are currently 0.5M ~ 480s mining zcash at the moment. and 0.1M ~ 480s mining ethereum classic and..
600++ other mineable gpu coins.
The marketcap of ethereum classic is 2 times the marketcap of ethereum April last year.
.. and Claymore built his from the ground up.
How do you know that? ^^
Zen up... Holy shit finally making remotely decent profits with mainstream cards. Still, comparatively speaking, a 1070 should be earning a $18 a day.
now with zencash about 9$
Yeah happened like 30 mins after I posted that. It was up for almost 24hours though. XD
Zen up... Holy shit finally making remotely decent profits with mainstream cards. Still, comparatively speaking, a 1070 should be earning a $18 a day.
amd was lucky that ETH is still increasing so much, still i would choose nvidia because of better option, when ETH will go pos or diff boom there will be no more profit for amd
There is no magical fairy land of 'if there were no Eth'. If ETH goes away, we're all doomed. AMD hashrate isn't going to disappear. That means it'll overflow to every other coin in existence and we'll all be royally fucked. Even if something isn't as profitable right now, that doesn't mean it wont be profitable nor does it mean they wont mine negative (or what is considered negative to you due to power).
Nvidia is not the better option, it hasn't been for months. I keep saying this and there are still the koolaid drinkers and the fanbois that sneak out of the cracks. I'm mining with Nvidia because I've bought it over the last years. New baby miners that buy Nvidia hardware are fucking retarded. Do some research before you drop $10k on something.
There are currently roughly 1.2M~ 480s mining Ethereum at the moment. There is no way we'll survive if Eth goes PoS or disappears.
Of course. And 1080 should do more, at least 35. And 1080 Ti should do 50+. If you check 1080 Ti, you can see it reaches 35, but memload is only 75% and you cannot change that no matter OC. There is something seriously NOT adjusted for GDDR5X.
It is all about latency and I'm very doubt that you can mask it in software when we talk about dagger-hashimoto.Polaris cards with stock bios are also showin < 100% mem load and poor performance until better timings resulting lower latency are applied. It is not software - but hardware feature.
Big latency can be properly hidden with correct programming approach. The current one used by Genoil's CUDA kernel is obviously not the correct one. At the end, big mem bandwidth is more important when proper coding is applied.
And there is more of the Koolaid, notice how he ignores all my posts. He's still talking about Genoil's cuda miner for Ethereum, even though there are multiple miners for Ethereum for Nvidia. Genoils is just one of them. For instance, one you guys may have heard of Claymore also works for Nvidia (I don't even know why you would be using Genoil's right now). Performance is almost identical and Claymore built his from the ground up.
And no, you can't magically make latency go away. If they could, as I mentioned before, it would've been done before as Dagger is huge. However, a good dual miner is something that needs to be done since Claymore delays all the important changes to his miner for Nvidia by six months. That is something that can be worked on and fixed. Currently Nvidia doesn't have the assembly changes that AMD does and that offered a huge boost to dual mining performance for AMD. Since Nvidia GPUs are more performance heavy instead of memory heavy, focusing on the other algos that are meshed with it would help out immensely.
Good old crypto summer dump?
The total hashrate is affected the first 2-5 minutes of mining because the gpu's doesn't start to work. If you open gpu-z you can see that only some of the gpu's are working. This isn't a problem if you mine at the same pool for a long period of time. (If all the 6 gpu's have started).
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
Kinda worked around it by starting 4 miner instances with 2 gpu per instance. I don't think that issue affected the total hashrate though, just an inconvenience.
How would you start multiple instances in a multswitch batch like Nemosminer?
added gpu select command so you now can run 2-3 gpus multiple instances..
MPH 1.7.3 will be up soon which will also have the same options..
Never seen more then 33.3 mhs eth even with my record-breaking palit sjs samsung running 2200/2400 gpu/mem. Any proof about 36mhs with genoil, sp?
You modded bios, and modded code to do 36MHASH stable, and this is too expensive for you my friend.
You know pascal bios is signed and protected even if you flash it somehow card would not start if you don`t crack signing....
There is no bug with alexis78 miner. You can start all 7 gpus at the start with a simple command. Had no issue on all of my nvidia rigs ( 6 - 7 gpus).
Here is a snapshot of the alexisminer bug:
13:45:12 start the miner (6 card celeron rig)
4 gpu thread's is starting (3 seconds delay) and produce almost nothing, and the pool is reducing the difficulty to get a response.
13:48:31 The 5th gpu thread is starting. (2.5 minutes later)
The 6th gpu thread was enabled after 5 minutes of mining.
As I have said multiple times on this forum, if you just use cuda-schedule 0 than all of the cards start at the beginning with absolutely no problem.
i have tried cuda-schedule 0 command .. it did work but not for long ill test it again... seeing you Had no issue on all of your nvidia rigs ( 6 - 7 gpus).
(ive added sp-mod to NemosMiner so users have the option)..
Best Regards
#Nemo
There is no bug with alexis78 miner. You can start all 7 gpus at the start with a simple command. Had no issue on all of my nvidia rigs ( 6 - 7 gpus).
Here is a snapshot of the alexisminer bug:
13:45:12 start the miner (6 card celeron rig)
4 gpu thread's is starting (3 seconds delay) and produce almost nothing, and the pool is reducing the difficulty to get a response.
13:48:31 The 5th gpu thread is starting. (2.5 minutes later)
The 6th gpu thread was enabled after 5 minutes of mining.
As I have said multiple times on this forum, if you just use cuda-schedule 0 than all of the cards start at the beginning with absolutely no problem.
Never seen more then 33.3 mhs eth even with my record-breaking palit sjs samsung running 2200/2400 gpu/mem. Any proof about 36mhs with genoil, sp?
You modded bios, and modded code to do 36MHASH stable, and this is too expensive for you my friend.
The total hashrate is affected the first 2-5 minutes of mining because the gpu's doesn't start to work. If you open gpu-z you can see that only some of the gpu's are working. This isn't a problem if you mine at the same pool for a long period of time. (If all the 6 gpu's have started).
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
http://i66.tinypic.com/2a95cur.png
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
http://i66.tinypic.com/2a95cur.png
Kinda worked around it by starting 4 miner instances with 2 gpu per instance. I don't think that issue affected the total hashrate though, just an inconvenience.
How would you start multiple instances in a multswitch batch like Nemosminer?
On skein algo i get about 305Mh/s for gtx1060 3GB with intensity 31 pl 80W and clock +90 and memory +460
The total hashrate is affected the first 2-5 minutes of mining because the gpu's doesn't start to work. If you open gpu-z you can see that only some of the gpu's are working. This isn't a problem if you mine at the same pool for a long period of time. (If all the 6 gpu's have started).
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
Kinda worked around it by starting 4 miner instances with 2 gpu per instance. I don't think that issue affected the total hashrate though, just an inconvenience.
The total hashrate is affected the first 2-5 minutes of mining because the gpu's doesn't start to work. If you open gpu-z you can see that only some of the gpu's are working. This isn't a problem if you mine at the same pool for a long period of time. (If all the 6 gpu's have started).
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
But it is a problem when you use it with a profit switcher software like the Nemosminer, minercontrol, nicehash(3rd party) or similar software.
Yeah, I've also had the same issue with alexis miner. Didn't know it's the miner and at first thought there was something wrong with my rig. 8* gtx 1060 and skylake celeron with 4gb ram. Other miners work fine. Kinda worked around it by starting 4 miner instances with 2 gpu per instance. I don't think that issue affected the total hashrate though, just an inconvenience.
Instead you are complain about your weak cpu has issues then? Well I don't think a good Xeon or i7 is a waste of money...sofar all those issues even if it is about OpenCL miner eting all cpu on nvidia or like your complain about alexis i couldn't observe with a good Xeon/i7 while I saw those issues on crappy celeron ..even a Qualcomm 835 has more performance than those Celeron crappies.
I have more than 100 rigs and they all have cheap celeron cpu's.
I don't waste money on an I7. Bether to spend the money on 100 more gpu's.
The name of the program is "GPU miner", if I wanted to mine with the CPU I would use a "CPU miner".
SP not everyone buying cheap crap CPUs. It's not alexis issues.
This is working in all the other forks. Most rig owners use cheap celeron cpu's. You rather want to buy another GPU than waste the money on ram, hd and cpu.
Instead you are complaining about your weak cpu has issues then? Well I don't think a good Xeon or i7 is a waste of money...sofar all those issues even if it is about OpenCL miner eting all cpu on nvidia or like your complain about alexis i couldn't observe with a good Xeon/i7 while I saw those issues on crappy celeron ..even a Qualcomm 835 has more performance than those Celeron crappies.
SP not everyone buying cheap crap CPUs. It's not alexis issues.
This is working in all the other forks. Most rig owners use cheap celeron cpu's. You rather want to buy another GPU than waste the money on ram, hd and cpu.
SP not everyone buying cheap crap CPUs. It's not alexis issues.
I told many times who buys cheap buys twice or should shut up about performance issues obviously caused my morons thinking to save money and complain afterwards about bad performance.
I have no problems with alexis miner..it's stable and faster than anything else
I told many times who buys cheap buys twice or should shut up about performance issues obviously caused my morons thinking to save money and complain afterwards about bad performance.
I have no problems with alexis miner..it's stable and faster than anything else
@Pallas: its because he thought a cheap celeron is super duper deal for miner with 6-7gpus. lol I never had any issue like many others with alexis miner and no not blame microsoft but blame guys that try to blame others for their faults and mistakes. (e.g putting a crappy cpu into a 6+ gpu mining rig) lol
SP not everyone buying cheap crap CPUs. It's not alexis issues.
I told many times who buys cheap buys twice or should shut up about performance issues obviously caused my morons thinking to save money and complain afterwards about bad performance.
I have no problems with alexis miner..it's stable and faster than anything else
I told many times who buys cheap buys twice or should shut up about performance issues obviously caused my morons thinking to save money and complain afterwards about bad performance.
I have no problems with alexis miner..it's stable and faster than anything else
Jump to: