CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 460.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: Epsylon3 on January 02, 2017, 08:32:18 AM

you can use --max-diff in ccminer

You need to make a bat file like this:

:loop
ccminer -a skein -u (...) --maxdiff xxxx
ccminer -a skein -u (...) --maxdiff yyyy
ccminer -a skein -u (...) --maxdiff zzzz
ccminer -a skein -u (...) --maxdiff xxxx
ccminer -a skein -u (...) --maxdiff yyyy
ccminer -a skein -u (...) --maxdiff zzzz
ccminer -a skein -u (...) --maxdiff xxxx
ccminer -a skein -u (...) --maxdiff yyyy
ccminer -a skein -u (...) --maxdiff zzzz
ccminer -a skein -u (...) --maxdiff xxxx
ccminer -a skein -u (...) --maxdiff yyyy
ccminer -a skein -u (...) --maxdiff zzzz

ccminer -a LBRY -u (...) --timelimit 60 (Failover mining. 1 hour on LBRY (if all the diff's are too high))
goto loop

Find good values for xxxx yyyy and zzzz, and the miner will skip to the next coin if the diff is too high. (payout is low). Or just mine on zpool.ca with 20-30% fee.

http://coinmarketcap.com/currencies/auroracoin/ (3.84BTC 24h volume)
http://coinmarketcap.com/currencies/digibyte/ (20.09 BTC 24H volume)
http://coinmarketcap.com/currencies/myriad/ (1.67 BTC 24h volume)

failover:

http://coinmarketcap.com/currencies/library-credit/ (13.00 BTC 24h volume)

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: sp_ on January 02, 2017, 08:30:49 AM

Quote from: grrrgrrr on January 02, 2017, 08:23:32 AM

Those coins are consistently 25~35% below expectation

Zpool reports 0.048BTC/GHASH in the last 24 hours. if you subtract the 20% (bug or fee). You end up a bit higher than on one of the coins on yiimp. I think this is because zpool is switching between the most profitable coin. Zpool also have 5 coins in total and not 3. I would like to do this on yiimp too. Is it possible? (mine with 3 wallets and one worker)

Yup, no idea how you're supposed to mine one algo with multiple coin outputs on yiimp... talked about that before.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

you can use --max-diff in ccminer

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: grrrgrrr on January 02, 2017, 08:23:32 AM

Those coins are consistently 25~35% below expectation

Zpool reports 0.048BTC/GHASH in the last 24 hours. if you subtract the 20% (bug or fee). You end up a bit higher than on one of the coins on yiimp. I think this is because zpool is switching between the most profitable coin. Zpool also have 5 coins in total and not 3. I would like to do this on yiimp too. Is it possible? (mine with 3 wallets and one worker)

grrrgrrr

member

Activity: 72

Merit: 10

Quote from: sp_ on January 01, 2017, 03:22:18 PM

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last 24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

Those coins are consistently 25~35% below expectation

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: tbearhere on January 02, 2017, 07:38:29 AM

Quote from: sp_ on January 01, 2017, 03:22:18 PM

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last 24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

All that work to exchange them for BTC. I don't know why Epsylon3 doesn't make his pool like zpool. We're going to do it anyhow. And I would be mining there at his yiimp pool more.

Yup, especially when you need to juggle more coins. It's not worth the effort, especially when things can get saturated really easily and you need some sort of automated bacekend to handle the coin juggling (basically what YAAMP is).

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

you can auto sell if you want, but with your exchange accounts Wink

The problem is .. its hard to handle both modes and i dont want this auto-sell system involved with my yiimp instance

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: sp_ on January 01, 2017, 03:22:18 PM

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last 24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

All that work to exchange them for BTC. I don't know why Epsylon3 doesn't make his pool like zpool. We're going to do it anyhow. And I would be mining there at his yiimp pool more.

bensam1231

legendary

Activity: 1764

Merit: 1024

Voltage is locked on ALL 1XXX series cards (it's perma locked on all 9XX series cards as well). You can't increase voltage, the slider doesn't do anything. Only way to increase it is with bios mods and even then sometimes it's hardcoded directly into the cards.

The only way to influence voltage is with the TDP slider. You wont ever be able to hit more then what it's set at at the factory TDP just increases power delivery to the card (the voltage will still be maxed) at higher then 100%. That aside, trying to increase voltage while decreasing TDP doesn't even make sense as one is decreasing voltage while the other attempts to increase it.

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: m1n1ngP4d4w4n on January 01, 2017, 05:00:48 PM

Quote from: Amph on January 01, 2017, 04:52:52 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:50:57 PM

Quote from: sp_ on January 01, 2017, 04:47:17 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:43:04 PM

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

+150 core clock yes , of course to find the best settings i would have to test over a much longer period of time, but it should be close Wink

that +20mv is the key here, it's equal to running at 60% the core, in fact is above 1800, but of course you get lower wattage if you put 50%/+20mv instead of 60% PL

can you try without the +20mv and tell em the core, i want to know if we have the same one, i have 1720 without the 20mv

Yes that's about right, each 10% bring you about 25mhz, but above 20% at this tdp it doesn't give you more, so you can expect getting 0% Vcore 1720-30 / ~1740-50 10% / 1760-70 20%, dunno if this behavior is card dependent though, i seem to get different result than others with my OC's (EVGA FTW 1070)

it's strange i tried +20% voltage on the core with msi but the core stay at 17xx with 50% power limit, i'm using 4.3.0 version of msi

TR8888

hero member

Activity: 525

Merit: 500

After owning many many 280x's for years, Ive gone and got my first nvid rig, 5 x 1070.. I feel like a noob again Cheesy

I'll be floating around here asking noobish questions, I've just read the last 10 pages of this thread.. Good work sp_

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

On the gtx 1070 I get 590 with the sp-mod and only 540 on the same clocks with the alexis miner(high oc).

500@90 watt with proper settings.(mem -500, core oc +150, tdp 55%)

Neoscrypt is broken. With the 1.5.80 windows build you should get 1100 on the gtx 1080
x17 is 5% faster than 1.5.80 (May 2016) More can be done here.

Slava_K

hero member

Activity: 677

Merit: 500

I have on Alexis78 705MH (sp 695) on skein... Noescrypt 1.050MH (sp 0.400)... x17 14MH (sp 10.5). 1080Strix (1930 core 10200 mem).

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: Amph on January 01, 2017, 04:52:52 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:50:57 PM

Quote from: sp_ on January 01, 2017, 04:47:17 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:43:04 PM

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

+150 core clock yes , of course to find the best settings i would have to test over a much longer period of time, but it should be close Wink

that +20mv is the key here, it's equal to running at 60% the core, in fact is above 1800, but of course you get lower wattage if you put 50%/+20mv instead of 60% PL

can you try without the +20mv and tell em the core, i want to know if we have the same one, i have 1720 without the 20mv

Yes that's about right, each 10% bring you about 25mhz, but above 20% at this tdp it doesn't give you more, so you can expect getting 0% Vcore 1720-30 / ~1740-50 10% / 1760-70 20%, dunno if this behavior is card dependent though, i seem to get different result than others with my OC's (EVGA FTW 1070)

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:50:57 PM

Quote from: sp_ on January 01, 2017, 04:47:17 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:43:04 PM

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

+150 core clock yes , of course to find the best settings i would have to test over a much longer period of time, but it should be close Wink

that +20mv is the key here, it's equal to running at 60% the core, in fact is above 1800, but of course you get lower wattage if you put 50%/+20mv instead of 60% PL

can you try without the +20mv and tell me the core, i want to know if we have the same one, i have 1720 without the 20mv

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: sp_ on January 01, 2017, 04:47:17 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:43:04 PM

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

+150 core clock yes , of course to find the best settings i would have to test over a much longer period of time, but it should be close Wink

mendoza1468

newbie

Activity: 54

Merit: 0

Gtx 1080 ftw

Skein 712.5 (635 before)
neoscrypt 335 kh/s (before 1100)
x17 11.5 (11 before)

Someting wrong on gtx 1080 for neoscrypt

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:43:04 PM

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: sp_ on January 01, 2017, 04:31:45 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:30:35 PM

Quote from: sp_ on January 01, 2017, 04:07:43 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:04:15 PM

~285MH for one solo GTX970 (stock, no OC)
~3000MH for one rig of 6x1070 (50% tdp, +150/+600)

I think 50% TDP is too low on the 1070 for skein. Try 66% or higher, and reduce the memclock -500

Revised numbers and more try @ different TDP With same OC

~2950MH - 50% TDP - 600W @ wall - 4.916MH/W
~3130MH - 60% TDP - 775W @ wall - 4.038MH/W
~3270MH - 70% TDP - 915W @ wall - 3.573MH/W
~3370MH - 80% TDP - 1050W @ wall - 3.209MH/W
~3430MH - 90% TDP - 1150W @ wall - 2.982MH/W

so sadly for me as usual 50% is the way to go

you should also find the best intensity
-i 24
-i 25
-i 26
-i 27
-i 28
-i 29

~~-g 2 (2 threads)~~ Seems to be broken. I will fix it.

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Quote from: Amph on January 01, 2017, 04:37:53 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:30:35 PM

Quote from: sp_ on January 01, 2017, 04:07:43 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:04:15 PM

~285MH for one solo GTX970 (stock, no OC)
~3000MH for one rig of 6x1070 (50% tdp, +150/+600)

I think 50% TDP is too low on the 1070 for skein. Try 66% or higher, and reduce the memclock -500

Revised numbers and more try @ different TDP With same OC

~2950MH - 50% TDP - 600W @ wall - 4.916MH/W
~3130MH - 60% TDP - 775W @ wall - 4.038MH/W
~3270MH - 70% TDP - 915W @ wall - 3.573MH/W
~3370MH - 80% TDP - 1050W @ wall - 3.209MH/W
~3430MH - 90% TDP - 1150W @ wall - 2.982MH/W

so sadly for me as usual 50% is the way to go

A few try with -500 memclock +150 core

gave me overall -5% watts +5% hash @ all tdp's

are you using the +20mv on the core also? i get a lower result than your with those setting

yup always my +20% core voltage

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:30:35 PM

Quote from: sp_ on January 01, 2017, 04:07:43 PM

Quote from: m1n1ngP4d4w4n on January 01, 2017, 04:04:15 PM

~285MH for one solo GTX970 (stock, no OC)
~3000MH for one rig of 6x1070 (50% tdp, +150/+600)

I think 50% TDP is too low on the 1070 for skein. Try 66% or higher, and reduce the memclock -500

Revised numbers and more try @ different TDP With same OC

~2950MH - 50% TDP - 600W @ wall - 4.916MH/W
~3130MH - 60% TDP - 775W @ wall - 4.038MH/W
~3270MH - 70% TDP - 915W @ wall - 3.573MH/W
~3370MH - 80% TDP - 1050W @ wall - 3.209MH/W
~3430MH - 90% TDP - 1150W @ wall - 2.982MH/W

so sadly for me as usual 50% is the way to go

A few try with -500 memclock +150 core

gave me overall -5% watts +5% hash @ all tdp's

are you using the +20mv on the core also? i get a lower result than your with those setting

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 460. (Read 2347659 times)