CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 867.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: sp_ on November 09, 2015, 05:37:31 AM

Quote from: tbearhere on November 09, 2015, 03:33:12 AM

Quote from: sp_ on November 08, 2015, 04:58:09 PM

Quote from: TarzanSupplex on November 08, 2015, 12:46:30 PM

what is the default intensity for Lyra2rev2 on a 980 ti??

The default intensity is -X 18. You can test with -X 30. Might be faster?

@Sp ...Is this -X intensity taking the place of over clocking? thx

No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory.
You can verify this by running gpu-z and observe the allocated memory.

The -X intensity is linear growth of the memory buffer. The -i is exponential.

So if I set no overclocking and by using the -X and -i parameters I get a higher hash rate.... no overclocking needed? Or, theses parameters add extra hashrate and I can overclock getting even higher hashrate?

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: sp_ on November 09, 2015, 02:05:17 AM

Quote from: pokeytex on November 08, 2015, 06:19:19 PM

@SP
When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.
Thanks - pokeytex

1. Make sure that you use a 64bit windows installation.
2. Upgrade to the latest driver.
3. Add 16Gig of virtual memory in windows and reboot

If it doesn't work, reduce the intensity. with -i 23 or similar.

SP - ok I will make a larger vm in Windows and try the intensity setting.

Thank you.

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: chrysophylax on November 08, 2015, 08:37:44 PM

Quote from: pokeytex on November 08, 2015, 06:19:19 PM

@SP

When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.

Thanks - pokeytex

thats usually an intensity error mate ( cuda threads in gpu memory ) ...

#crysx

Thank you - I will try the intensity setting.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: tbearhere on November 09, 2015, 03:33:12 AM

Quote from: sp_ on November 08, 2015, 04:58:09 PM

Quote from: TarzanSupplex on November 08, 2015, 12:46:30 PM

what is the default intensity for Lyra2rev2 on a 980 ti??

The default intensity is -X 18. You can test with -X 30. Might be faster?

@Sp ...Is this -X intensity taking the place of over clocking? thx

No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory.
You can verify this by running gpu-z and observe the allocated memory.

The -X intensity is linear growth of the memory buffer. The -i is exponential.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: sp_ on November 08, 2015, 04:58:09 PM

Quote from: TarzanSupplex on November 08, 2015, 12:46:30 PM

what is the default intensity for Lyra2rev2 on a 980 ti??

The default intensity is -X 18. You can test with -X 30. Might be faster?

@Sp ...Is this -X intensity taking the place of over clocking? thx

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: pokeytex on November 08, 2015, 06:19:19 PM

@SP
When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.
Thanks - pokeytex

1. Make sure that you use a 64bit windows installation.
2. Upgrade to the latest driver.
3. Add 16Gig of virtual memory in windows and reboot

If it doesn't work, reduce the intensity. with -i 23 or similar.

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: pokeytex on November 08, 2015, 06:19:19 PM

@SP

When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.

Thanks - pokeytex

thats usually an intensity error mate ( cuda threads in gpu memory ) ...

#crysx

pokeytex

legendary

Activity: 1504

Merit: 1002

@SP

When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.

Thanks - pokeytex

TarzanSupplex

newbie

Activity: 17

Merit: 0

Quote from: sp_ on November 08, 2015, 04:58:09 PM

Quote from: TarzanSupplex on November 08, 2015, 12:46:30 PM

what is the default intensity for Lyra2rev2 on a 980 ti??

The default intensity is -X 18. You can test with -X 30. Might be faster?

Thanks-
I have been setting intensity by device since I have a 950 in the mix. 20 seems to work well with the non-monitor 980 ti-

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: TarzanSupplex on November 08, 2015, 12:46:30 PM

what is the default intensity for Lyra2rev2 on a 980 ti??

The default intensity is -X 18. You can test with -X 30. Might be faster?

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: bensam1231 on November 07, 2015, 08:34:03 PM

Quote from: grendel25 on November 07, 2015, 07:05:20 PM

Quote from: sp_ on November 06, 2015, 03:33:28 AM

joincoin is still profitable, but only with my 120% faster penta miner..

0.3BTC and you will get it.

quark, lyra2v2 and etherum are profitable now. But only with private kernals.

sp_

How much faster is quark in the private kernal? Considering the purchase but I doubt it's worth it or maybe the ROI would take a long time since I only have 7 GPUs mining (750ti).

Thank you.

SP doesn't sell his Quark. You have to suck DJMs dick hard to get the Lyra miner... and have a lot of money.

which part did you fail exactly ? I don't remember any of it, but you really suck at sucking dev dicks in general Grin

TarzanSupplex

newbie

Activity: 17

Merit: 0

what is the default intensity for Lyra2rev2 on a 980 ti??

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: chrysophylax on November 08, 2015, 05:05:26 AM

the test machine was updated to fedora 23 x64 cuda 7.5 - which meant gcc was updated also ...

it seems that broke something in the compile ... when compiling in fedora 22 x64 cuda 7.5 - it all compiles well again ...

ill check this latest compile when i get the chance - but it looks to be stable so far ...

tanx sp ...

#crysx

Check for configure errors before running make, you may just be missing a package.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: bathrobehero on November 07, 2015, 12:29:19 PM

Quote from: hashbrown9000 on November 07, 2015, 11:39:43 AM

what is a 750ti on X13 algo hashing at these days?

Around 2.48 mhs with some overclock.

but on standard clocks:

gtx 970: 6400
gtx 960: 4160
gtx 750ti 2230

tbearhere

legendary

Activity: 3164

Merit: 1003

SP on r71 doom and r73 doom benchmarks. r73 before you did a fix didn't have the found nonce.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: chrysophylax on November 08, 2015, 06:12:51 AM

Quote from: tbearhere on November 08, 2015, 05:47:57 AM

Quote from: tbearhere on November 08, 2015, 04:17:15 AM

Quote from: sp_ on November 08, 2015, 04:15:34 AM

yes. -a doom

I have submitted some more fixes, so you probobly need to build the latest verison.
The 970 should do around 220MHASH
the 960 should do around 140MHASH

Lets see what the 980ti will do. Grin

EDIT: 360mh on the 980ti. Grin

before the fix.

Is the fix in your zip file?
I'm going to compile it on my new clean computer.

I get the usual ccminer won't load correctly on compiling...I'll just use your compiled verson sp.

Damn error on loading that's all get for a year now. Angry

on windows tbearhere? ...

#crysx

Yes crysx.

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: tbearhere on November 08, 2015, 05:47:57 AM

Quote from: tbearhere on November 08, 2015, 04:17:15 AM

Quote from: sp_ on November 08, 2015, 04:15:34 AM

yes. -a doom

I have submitted some more fixes, so you probobly need to build the latest verison.
The 970 should do around 220MHASH
the 960 should do around 140MHASH

Lets see what the 980ti will do. Grin

EDIT: 360mh on the 980ti. Grin

before the fix.

Is the fix in your zip file?
I'm going to compile it on my new clean computer.

I get the usual ccminer won't load correctly on compiling...I'll just use your compiled verson sp.

Damn error on loading that's all get for a year now. Angry

on windows tbearhere? ...

#crysx

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: tbearhere on November 08, 2015, 04:17:15 AM

Quote from: sp_ on November 08, 2015, 04:15:34 AM

yes. -a doom

I have submitted some more fixes, so you probobly need to build the latest verison.
The 970 should do around 220MHASH
the 960 should do around 140MHASH

Lets see what the 980ti will do. Grin

EDIT: 360mh on the 980ti. Grin

before the fix.

Is the fix in your zip file?
I'm going to compile it on my new clean computer.

I get the usual ccminer won't load correctly on compiling...I'll just use your compiled verson sp.

Damn error on loading that's all get for a year now. Angry

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: sp_ on November 08, 2015, 04:54:23 AM

I have updated the exefile with the deep and doom improvements.

1.5.73(sp-MOD) is available here: (08-nov-2015)

https://github.com/sp-hash/ccminer/releases/

The sourcecode is available here:

https://github.com/sp-hash/ccminer

-Doom/Luffa512 5% faster
-Deep 12.5% faster
-faster qubit (50-100KHASH 750ti (around 2%))
-lyra2v2 Improved hashrate on low difficulty pools. (fixed the 2 nonce return)
-Bastion cpu mining
-Reduced rejects in the skein algo

sp ...

i didnt understand what you meant by 'ask the puppet master' ...

but - i have found the issue to a simple thing ...

the test machine was updated to fedora 23 x64 cuda 7.5 - which meant gcc was updated also ...

it seems that broke something in the compile ... when compiling in fedora 22 x64 cuda 7.5 - it all compiles well again ...

ill check this latest compile when i get the chance - but it looks to be stable so far ...

tanx sp ...

#crysx

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

I have updated the exefile with the deep and doom improvements.

1.5.73(sp-MOD) is available here: (08-nov-2015)

https://github.com/sp-hash/ccminer/releases/

The sourcecode is available here:

https://github.com/sp-hash/ccminer

-Doom/Luffa512 5% faster
-Deep 12.5% faster
-faster qubit (50-100KHASH 750ti (around 2%))
-lyra2v2 Improved hashrate on low difficulty pools. (fixed the 2 nonce return)
-Bastion cpu mining
-Reduced rejects in the skein algo

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 867. (Read 2347659 times)