CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 875.

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: Masked_Immortal on October 30, 2015, 02:18:13 AM

any idea about mining ETH with 750ti?
is it profitable in comparison with other algo?

I have mined ETH on Linux with my 750Ti:s
But i found it very buggy, very hard to know your real hashrate and stuff.
I had to rely on the hashrate reported by the pool and it went up and down alot.
I also had alot of rejected work with the nvidia rigs.

So, yeah it work but if it is the best to do with 750 cards i dont know.
My cards did around 8Mhs at most. But the hashrate seemed to go up and down alot.

On my AMD rig the hashrate was like constant and no hazzle at all while mining ETH.

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: Masked_Immortal on October 30, 2015, 02:18:13 AM

any idea about mining ETH with 750ti?
is it profitable in comparison with other algo?

Not on Windows. Using my CUDA ethminer on Linux, the 750ti has the best hashrate/watt. That said, the overall hashrate isn't that great, ~8.7MH on stock clocks. You're up against massive Radeon farms where each card easily does 25MH/s. Besides that, the TLB trashing issue will eventually affect the Linux version too, reducing hashrate even more. I think you're better off with the popular ccminer algo's.

You can also check here: http://badmofo.github.io/ethereum-mining-calculator/ . From what I've read you should subtract about 10% for pool mining.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

Quote from: tbearhere on October 29, 2015, 04:06:13 PM

Thx but is it possible to leave the other 2 cards without the intensity because I don't know what is the default intensity is.

-i 0 should use defaults, so something like "19,0,18" should work

Masked_Immortal

member

Activity: 67

Merit: 10

any idea about mining ETH with 750ti?
is it profitable in comparison with other algo?

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: tbearhere on October 29, 2015, 04:16:05 PM

Quote from: Slava_K on October 29, 2015, 04:12:59 PM

Quote from: tbearhere on October 29, 2015, 04:06:13 PM

Quote from: Slava_K on October 29, 2015, 03:58:39 PM

Quote from: tbearhere on October 29, 2015, 03:53:49 PM

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

- d 0,1,2 - i 18,20,20 etc...

Thx but is it possible to leave the other 2 cards without the intensity because I don't know what is the default intensity is.

Two bat files only... For first card and for secondary....

I was trying to avoid that but at least there in the same folder now.

thx

At home I use 980 at primary and 960 at secondary whithout -i...

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Slava_K on October 29, 2015, 04:12:59 PM

Quote from: tbearhere on October 29, 2015, 04:06:13 PM

Quote from: Slava_K on October 29, 2015, 03:58:39 PM

Quote from: tbearhere on October 29, 2015, 03:53:49 PM

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

- d 0,1,2 - i 18,20,20 etc...

Thx but is it possible to leave the other 2 cards without the intensity because I don't know what is the default intensity is.

Two bat files only... For first card and for secondary....

I was trying to avoid that but at least there in the same folder now.

thx

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: tbearhere on October 29, 2015, 04:06:13 PM

Quote from: Slava_K on October 29, 2015, 03:58:39 PM

Quote from: tbearhere on October 29, 2015, 03:53:49 PM

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

- d 0,1,2 - i 18,20,20 etc...

Thx but is it possible to leave the other 2 cards without the intensity because I don't know what is the default intensity is.

Two bat files only... For first card and for secondary....

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Slava_K on October 29, 2015, 03:58:39 PM

Quote from: tbearhere on October 29, 2015, 03:53:49 PM

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

- d 0,1,2 - i 18,20,20 etc...

Thx but is it possible to leave the other 2 cards without the intensity because I don't know what is the default intensity is.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: Slava_K on October 29, 2015, 03:58:39 PM

- d 0,1,2 - i 18,20,20 etc...

There was a bug in this code that was fixed in one of the 6x releases. don't remember wich.

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: tbearhere on October 29, 2015, 03:53:49 PM

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

- d 0,1,2 - i 18,20,20 etc...

tbearhere

legendary

Activity: 3164

Merit: 1003

@sp yes lyra2re2 at .3400 and BTC at $312 usd Cheesy

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: tbearhere on October 29, 2015, 03:27:31 PM

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Let me start over

I have 3 cards 750ti on this computer and with one bat file I need to set the intensity of -d 0 to -i 20 ...but leave the other cards at there normal intensity.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

TSIV, DJM34 where are your private kernals?

Everybody seems to use my optmized kernals for some reason.

someone is renting lyra2v2 at nicehash for 0.29BTC and mine 0.34BTC on the yaamp clone multipool.

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: Slava_K on October 29, 2015, 02:48:36 PM

Quote from: sp_ on October 29, 2015, 02:27:55 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Try the option -C to see if it helps. and perhaps --cpu-affinity 1 to limit to one cpu core

If not use the integrated graphics on your motherboard.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Slava_K on October 29, 2015, 02:21:52 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

I forgot to add that there are 2 other cards using r71.
EDIT: -i 20 did it..... thx
Now to get only one bat file that will do that to -d 0 and leave -d 1,2 alone.

-p x -d 0 -i 20 -d 1,2 that didn't work.

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: sp_ on October 29, 2015, 02:27:55 PM

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Try the option -C to see if it helps. and perhaps --cpu-affinity 1 to limit to one cpu core

If not use the integrated graphics on your motherboard.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Try the option -C to see if it helps. and perhaps --cpu-affinity 1 to limit to one cpu core

If not use the integrated graphics on your motherboard.

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: tbearhere on October 29, 2015, 01:40:14 PM

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Set -i 20 (19,18,17,16 or less)...

tbearhere

legendary

Activity: 3164

Merit: 1003

I have one card I use on this computer for mining and watching netflex at the same time....I can only do this with R43. Is there an intensity setting that I can use to do the same thing with R71? Thx

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

Quote from: Slava_K on October 28, 2015, 11:45:49 AM

Looks like yiimp is on sidechain... mined 6000 ams. On yobit balance is zero... transfers made more then hour ago...

indeed, since 12 hours... erfghh second time with this coin

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 875. (Read 2347659 times)