Topic: Cgminer 3.0.1 and Lucid Logix Virtu MVP software help config needed. - page 2. (Read 4261 times)
April 25, 2013, 06:52:48 AM
April 25, 2013, 06:25:39 AM
what does "cgminer -n" show? we can then debug after knowing all the information.
i am interested in this setup and want to know if it can work.
i am interested in this setup and want to know if it can work.
April 24, 2013, 02:41:12 PM
buried cause nobody knows. close this thread.
April 24, 2013, 10:05:31 AM
Hi I wish i could post this in the cgminer thread but im limited as a newbie.
I have a z77 motherboard and a pretty good intel cpu 3570k with an onchip igpu that does not disable if you insert a discrete video card on the motherboard.
The intel 4000 hd igpu has its own OpenCL code and i can seperatly overclock the igpu on the cpu to play all my games decently.
My goal was to use cgminer at intensity 9 on my 6970 video card overclocked, and use the igpu to play games and surf web.
I have Lucid Logix Virtu MVP installed and connected to the igpu port.
Once I start cgminer I get this:
ADL found less devices than opencl!
There is possibly more than one display attached to a GPU
Use the gpu map feature to reliably map OpenCL to ADL
Warning: number of opencl and ADL do not match!
Hardware monitoring may not match up with devices!
---------------------------------------
So can someone help me figure this out?
I have a z77 motherboard and a pretty good intel cpu 3570k with an onchip igpu that does not disable if you insert a discrete video card on the motherboard.
The intel 4000 hd igpu has its own OpenCL code and i can seperatly overclock the igpu on the cpu to play all my games decently.
My goal was to use cgminer at intensity 9 on my 6970 video card overclocked, and use the igpu to play games and surf web.
I have Lucid Logix Virtu MVP installed and connected to the igpu port.
Once I start cgminer I get this:
ADL found less devices than opencl!
There is possibly more than one display attached to a GPU
Use the gpu map feature to reliably map OpenCL to ADL
Warning: number of opencl and ADL do not match!
Hardware monitoring may not match up with devices!
---------------------------------------
So can someone help me figure this out?
Jump to: