Pages:
Author

Topic: Cheap Chinese VGA Coolers - FTW ! - page 2. (Read 6645 times)

hero member
Activity: 592
Merit: 501
We will stand and fight.
March 20, 2012, 01:41:28 PM
#5
OC3 is a famous PC cooling solution provider in China.
all my CPU coolers are this brand.
personally, they are very good. the HDT technology really can achieve a high performance.
member
Activity: 106
Merit: 10
March 20, 2012, 08:45:19 AM
#4
installed pics please... also I assume these are big enough to go past the standard two slot design?

This looks interesting to:

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=250821911628



and this

sr. member
Activity: 462
Merit: 250
I heart thebaron
March 20, 2012, 07:28:22 AM
#3
I have tried a couple models on HD5770's, HD5830 Extremes and HD6950's.

What max. temperature did you get on each cooler and fan on each of those GPUs? What's your ambient temp. and which paste did you use?

Ambient and minimal test results in the OP. Cheap/Included Silicon-based paste used.
legendary
Activity: 3472
Merit: 1727
March 20, 2012, 05:47:59 AM
#2
I have tried a couple models on HD5770's, HD5830 Extremes and HD6950's.

What max. temperature did you get on each cooler and fan on each of those GPUs? What's your ambient temp. and which paste did you use?
sr. member
Activity: 462
Merit: 250
I heart thebaron
March 20, 2012, 05:01:05 AM
#1

Before anyone goes on reading and asks WHY ?....

PROs and CONs summary: (based on what I have experienced so far)

PROs
-----
- Cheap, overall (cost).
- Cheap Fan replacements/upgrades using readily available case fans down the road.....
- Memory Heatsinks included.
- Good Cooling capabilities (from what I have tested thus far).
- Fan speed has effect on cooling, as I have tried active, passive and alt fan speeds (ie. better cooling using better fans than the cheapies included, although included fans are still very good).

CONs
-----
- Overall BIG coolers (if space is at a premium)
- 3pin fans included (wth 4pin molex extension), fan control on 3pin motherboard header or add-on controller only.

In summation, if I could acquire cheap PWM 4pin fans in corresponding sizes that I could cut the original connectors from the dead video cards fans to retrofit onto and plug the new fans directly onto the video cards themselves for speed management, this setup would be awesome.
Example...
http://www.ebay.ca/itm/90-80mm-x25mm-PWM-LGA775-Round-CPU-Fan-/150598747013?pt=LH_DefaultDomain_0&hash=item2310628385#ht_2614wt_1396

----------------------------------------------------------------------------------------------------------------------------------------------------
Original post.....

I ran into a few failing coolers and needed quick and easy replacements, so I decided to give a few of these a try.
Being a bit apprehensive due to the LOW prices, I was pleasantly surprised at the performance to say the least.

I have tried a couple models on HD5770's, HD5830 Extremes and HD6950's.

These coolers are excellent replacements for cards that DO NOT REQUIRE MEMORY COOLING (most miners with lowered memory freq) or cards that HAVE AN ONBOARD VRM COOLER (6950).

The only downside I have found - THEY ARE BIG...
These are excellent for MINING in an open rig where room is plenty, NOT FOR GAMING.

*All included Fans = 4pin Molex + 3pin motherboard header-style combo, soft mounts.
(3pin/3wire native, so RPM control/monitoring is possible)

Results and Recommendations:

K91 (90mm fan included, no heatpipes) - under $10 USD inc shipping.
http://www.ebay.ca/itm/PC-Computer-Video-Graphic-Card-cooler-VGA-K91-GT430-/250821916400?pt=LH_DefaultDomain_0&hash=item3a6626b6f0#ht_7156wt_1396
-------------------------------------
HD5770 - 58c 24/7 mining in 20c+ ambient, 1.2V, 960Mhz. RECOMMENDED & CURRENTLY IN USE (even using Molex power, no fan control)
HD5830 - 80c+ Mining in 20c+ ambient - NOT RECOMMENDED.


K90 (90mm fan included, 2 heatpipes) - approx $15 USD inc shipping.
http://www.ebay.ca/itm/PC-Computer-Video-Graphic-Card-cooler-VGA-K90-HD5770-/260786200758?pt=LH_DefaultDomain_0&hash=item3cb811a0b6#ht_7244wt_1396
---------------------------------------------------------------
HD5830 - 61.5c 24/7 mining in 20c+ ambient, 1.163V, 975 Mhz. RECOMMENDED & CURRENTLY IN USE (even using Molex power, no fan control)
HD6950 - 85c+ Mining in 20c+ ambient - NOT RECOMMENDED.


K120 (4 heatpipes, no 120mm fan included) - approx $30 USD inc shipping.
http://www.ebay.ca/itm/PC-Computer-Video-Graphic-Card-cooler-VGA-K120-GTX460-/260968488899?pt=LH_DefaultDomain_0&hash=item3cc2ef1fc3#ht_9132wt_1396
--------------------------------------------------------------------
HD6950 - On order and will report soon, BUT CONFIDENT once implemented ...comparing to shitty OEM XFX Single Fan 6950 Coolers (and results above).


Other models not tried (no need to, can assume performance based on the above).
- 80mm 2 Heatpipe w/Fan. $15 (k80)
- 80mm 4 Heatpipe w/Fan. $22 (k80D)
- 100mm 2 Heatpipe w/Fan. $15 (k101D)
- 100mm 4 Heatpipe w/Fan. $25 (k101F)



Take with a grain of salt as usual, YMMV.
Hope this helps some people in the same position.

Ebay Seller's Listings - http://www.ebay.ca/sch/she-in/m.html?_nkw=vga+cooler
Pages:
Jump to: