Minimum 4 kits BMOC
A couple additional full kits possible to round things out.
I am going to pretend like I know what I'm talking about here and say:
"Will you be providing a source for the backplane?"
--------------------------------------------------------------------
Public Service Announcement:
Soldering a QFN: http://store.curiousinventor.com/guides/Surface_Mount_Soldering/QFN/
Topic: [Checking interest] QikFury blank boards + Bitfury chips + Vregulator group buy - page 3. (Read 3089 times)
January 07, 2014, 11:21:25 AM
January 07, 2014, 09:12:40 AM
Would one of theses boards need anything else to connect to pc. Do they have USB for cgminer
+1
What are the additional components needed to start hashing, if any...
January 07, 2014, 08:56:19 AM
I would be interested in 3 kits, assembled ideally
January 07, 2014, 08:50:07 AM
Interested for 2 boards.
January 07, 2014, 07:59:28 AM
I would take 30 kits if available soonish.
January 07, 2014, 07:53:04 AM
Would one of theses boards need anything else to connect to pc. Do they have USB for cgminer
January 07, 2014, 03:03:07 AM
If this happens in the near future I will purchase 16 - 17 kits.
January 07, 2014, 01:18:21 AM
Interested in 1 or 2 kits. Each board does approx ~35Gh/s correct?
Yes on an average speed's 35GH/s. The minimum observed speed is 32GH/s (if two chips throw errors). Some cards with 16 good chips run at 37GH/s. January 07, 2014, 01:14:58 AM
Interested in 1 or 2 kits. Each board does approx ~35Gh/s correct?
January 07, 2014, 12:46:38 AM
The package will cost $50(v1 H-board) + $5.5*18(some BF chips throw MISO errors right out of the reel) + $60 (regulator) = ~$209e.a.
Assembled boards will cost ~$75 extra e.a.
BYOC is also possible.
Guys anyone interested in a group buy? If yes please let me know on this thread how many. You will have to solder the chips yourself, it's easy if you know how to solder a QFN. You need some solder paste + hot air + solder iron for the contacts.
QikFury boards-> https://bitcointalksearch.org/topic/project-qikfury-prototype-v1-bitfury-h-boards-in-action-391689
Estimated delivery 3rd Week February 2014.
Assembled boards will cost ~$75 extra e.a.
BYOC is also possible.
Guys anyone interested in a group buy? If yes please let me know on this thread how many. You will have to solder the chips yourself, it's easy if you know how to solder a QFN. You need some solder paste + hot air + solder iron for the contacts.
QikFury boards-> https://bitcointalksearch.org/topic/project-qikfury-prototype-v1-bitfury-h-boards-in-action-391689
Estimated delivery 3rd Week February 2014.
Jump to: