Topic: Claymore XPM GPU Miner discussion - page 58. (Read 142120 times)
how much outcome from one 280x? (~ XPM per day)
that is at -ss0 gpu load will be 100%
The GPU load is suppose to be 90%~100%, right? His CPU load is just only 16%, which is fine?
What's the target CPU load to stay around at to get peak performance?
GPU load does not show anything. If different catalyst version is used than 13.12, it will compile OpenCL code into different instructions and it will cause huge speed down, though GPU still will be loaded completely. Because GPU works slowly, CPU load is low too, CPU prepares data for card, card is faster - more data is required - more CPU load, and vice versa.
If driver crashed - need to reboot computer to restore card speed. In some times it is necessary to reinstall drivers. Also v2.0 uses card more, so use less clocks than for v1.5.
Celeron G1620 2xMSI 280X 1120/1500
V 2.0
NsXpmMiner.exe -o ypool.net -u Worker_1 -p Pass -di 0 -ss0
NsXpmMiner.exe -o ypool.net -u Worker_2 -p Pass -di 1 -ss0
GPU Load 92-93%
V 2.0
NsXpmMiner.exe -o ypool.net -u Worker_1 -p Pass -di 0 -ss0
NsXpmMiner.exe -o ypool.net -u Worker_2 -p Pass -di 1 -ss0
GPU Load 92-93%
Celeron G1620 2xMSI 280X 1120/1500
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%
Reinstall catalyst v13.12, reboot computer and disable overclocking.
The GPU load is suppose to be 90%~100%, right? His CPU load is just only 16%, which is fine?
What's the target CPU load to stay around at to get peak performance?
Celeron G1620 2xMSI 280X 1120/1500
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%
v1.5 GPU Load 75-81%
v2.0 GPU Load 97-99%
Reinstall catalyst v13.12, reboot computer and disable overclocking.
my bat is standart:
NsXpmMiner.exe -o ypool.net -u Worker_1 -p Pass -di 0
NsXpmMiner.exe -o ypool.net -u Worker_2 -p Pass -di 1
NsXpmMiner.exe -o ypool.net -u Worker_1 -p Pass -di 0
NsXpmMiner.exe -o ypool.net -u Worker_2 -p Pass -di 1
[/urlDid you try -ss 0? You got some overhead on the cpu load to try it out.
i am too -ss 0 gpu load 50%...
without - ss 0 gpu load at 90%
precisely with ss quicker?
my bat is standart -
NsXpmMiner.exe -o ypool.net -u YourLogin.WorkerName -p YourPassword -di 0
=gpu load 90% as well as was in 1.5 ver.
without - ss 0 gpu load at 90%
precisely with ss quicker?
my bat is standart -
NsXpmMiner.exe -o ypool.net -u YourLogin.WorkerName -p YourPassword -di 0
=gpu load 90% as well as was in 1.5 ver.
Yes you want 90% or greater on the GPU load and less than 80% on CPU load.
Wow very nice increase! Will contribute still as well..its worth it!
Quote from: Claymore link=pic=557604.msg6143634#msg6143634 date=1397062244
Quote from: Strannik-74 link=pic=557604.msg6143592#msg6143592 date=1397062026
How run correctly:
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
As you wish. Second approach is better if you see stats on pool for every miner.
This is what meaning? The new configuration approach?
i am too -ss 0 gpu load 50%...
without - ss 0 gpu load at 90%
precisely with ss quicker?
my bat is standart -
NsXpmMiner.exe -o ypool.net -u YourLogin.WorkerName -p YourPassword -di 0
=gpu load 90% as well as was in 1.5 ver.
without - ss 0 gpu load at 90%
precisely with ss quicker?
my bat is standart -
NsXpmMiner.exe -o ypool.net -u YourLogin.WorkerName -p YourPassword -di 0
=gpu load 90% as well as was in 1.5 ver.
I'm getting a TRT of 428 at 1150 core and 1500 memory with -ss 0 at 29%~37% cpu load, that's so major performance increase. This is on a single MSI Twin Frozr III HD7970 OC BE with an Arctic Cooling Accelero Extreme 7970 gpu cooler.
Make sure to keep the core/memory ratio from stock speed, if you overclock.
Make sure to keep the core/memory ratio from stock speed, if you overclock.
How to run correctly:
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
As you wish. Second approach is better if you want to see stats on pool for every miner.
How to run correctly:
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
rig1 worker_1 -id 0
rig1 worker_1 -id 1
rig2 worker_2 -id 0
rig2 worker_2 -id 1
or
rig1 worker_1 -id 0
rig1 worker_2 -id 1
rig2 worker_3 -id 0
rig2 worker_4 -id 1
Gonna keep that 10% fee enabled simply because you allowed the freedom of choice to disable it.
New version v2.0 released:
1. Mining speed is about 60% faster now for all cards. About 1.5-1.6 chains per day on a single 290X.
2. No mining speed degradation for cards on risers.
3. Reduced CPU usage.
4. "nofee" option.
waw..respect1. Mining speed is about 60% faster now for all cards. About 1.5-1.6 chains per day on a single 290X.
2. No mining speed degradation for cards on risers.
3. Reduced CPU usage.
4. "nofee" option.
gonna continue using "10% fee" option
tks
Same here!
Jump to: