Topic: Claymore's Cryptonite (XCN) GPU Miner v2.3 - page 8. (Read 35546 times)

It already has >50%, just check the list of latest found blocks.

Works for me now. Even with Catalyst 14 by copy/paste

I'm guessing this will release mean 1gh will have way more than 50% of the network.

Updated, v1.1 beta:

- Improved mining speed, about 8 MH/s on stock 290x.
- Fixed issue with OpenCL warnings.

Unfortunately, issue with Catalyst 14.x will take some more time.

My mistake, my dev system has custom OpenCL settings, I will reload binaries in a few minutes.

PS. It will take some more time because I found how to avoid problem with Catalyst 14.x and also improve miner speed.

I have the same problem with AMD 270x and AMD 280x too!

I really don't like Linux Almost any action there takes much more time than in Windows and I don't like to spend a lot of time for nothing. Simple action - install Catalyst 13.12 on Ubuntu 14.04. As I found, it's impossible, spent half a day for nothing. And so on... However, I will release Linux CryptoNote miner very soon.

"WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target tripes: 'amdil-pc-amdopencl'"


What does this mean?

I use 13.12

Why no support for linux for any Claymore miner? Is it just because binaries are more easily/effectively obfuscated for windows? You guys just love bill gates? Hate linus? Just curious.

780ti is a bit more expensive and powerful card But I agree, in general nvidia is faster for this algo. At least for now.

6.2MH/s on 290x    wow that's bad... compared to nvidia equivalent 780ti doing 14MH/s
(that's mostly the same perf as the 750ti for 4x the power usage...)

I was thinking to switch back my 660 with my 290x, well for less than 2MH/s it isn't worth it.  

No problem, I'll wait.

v14.x drivers have some new bug in OpenCL compiler, it will take some time to investigate this issue and find a workaround, probably 1-2 days.

Very nice!
Catalyst 14 version coming soon?

Sadly this does not work on my catalyst 14.

Claymore Cryptonite (XCN) GPU Miner
=========================

Current version 2.3:

- Devfee is set to 0% since this miner is not supported for a long time.

Link:
https://mega.co.nz/#F!PxJXBD5T!zj1GJ7zkmvqfo3yd2mis-Q

Mirror:
https://drive.google.com/folderview?id=0B69wv2iqszefT2JUYmpqN09yWnM&usp=sharing

This is POOL version.
There are two versions: for Catalyst 13.12 and for 14.7. Version for Catalyst 14.7 is faster by about 10%.

CURRENT LIMITATION: Only "1gh.com" and "nonce-pool.com" pools are supported.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

Developer fee is set to 0% in v2.3 since this miner is not supported for a long time.

This version is for recent AMD videocards only: 6xxx, 7xxx and 2xx. No nVidia support.

This version is for Windows x64 only. No Windows x32 support. No Linux support.

This version has no GPU temperature and overclocking management.

COMMAND LINE OPTIONS:

-o    pool address and port.

-u    your wallet address.

-p    password, use "x" as password.

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs.

-dbg   debug log and messages. "-dbg 0" - create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages. "-dbg -1" (default) - no log file and no debug messages.

SAMPLE USAGE

NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CbQCrFD85s8hjKztoUJm51AnZV1iyDBpBa -p x

Do not forget to specify your wallet address!

PERFORMANCE

About 9.0 Mh/s on stock 290X for Catalyst 14.7 version.

TROUBLESHOOTING

1. Install Catalyst v13.12 or 14.7 and use appropriate miner version.
2. Disable overclocking.
3. Set GPU_MAX_ALLOC_PERCENT 100.
4. Reboot computer.