Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 21. (Read 3839201 times)
Is the hash rate reported on the command line accurate or do I need to wait to see what the pool says after (say) 30 mins? I'm tweaking my settings and overclocking, but I'm not sure what to trust.
Does anyone here know how to get past the opencl error 0 #101 issues? I'm running a pair of older 6970s, and with every version so far I've had these errors pop up, one for each gpu. Then the miner proceeds to sit there and do nothing at all, or BSOD my system.
I always get this problem whenever i start to mine, been trying different pools but i still get the same error can anybody tell me how to fix this.
I dont know what "OpenCL error" this is my first time mining.
I dont know what "OpenCL error" this is my first time mining.
Is there a Claymore ZCash miner for Nvidia??
all shares on btg.suprnova are rejected 
Not only on Suprnova but the pool I've tried, https://pool.miningspeed.com/ has ZERO Bitcoin Gold miners, I think other pools are also having problems.
I think the problem is more severe than just a pool problem, looks like the whole network is kaput !
Here is what MiningSpeed say about it..
"Bitcoingold is currently currently premining till block 499407, after this block our stratum will boot and start mining, no ETA on this, hang on!"
"Attention! Pool is currently waiting for BTG developers pre-mine ending and will be up shortly! Blockchain Height current value: 497066 / 499407 (2341 blocks left)"
Just sit and wait till the pre-mine is finished, I guess.
all shares on btg.suprnova are rejected
Not only on Suprnova but the pool I've tried, https://pool.miningspeed.com/ has ZERO Bitcoin Gold miners, I think other pools are also having problems.
I think the problem is more severe than just a pool problem, looks like the whole network is kaput !
Here is what MiningSpeed say about it..
"Bitcoingold is currently currently premining till block 499407, after this block our stratum will boot and start mining, no ETA on this, hang on!"
all shares on btg.suprnova are rejected
I'm only seeing one GPU temperature display on the console running v12.6. Any ideas on how to get the 2nd GPU temp displayed? Mining has been running good, just I never see GPU1 temp. 
Running 2 RX470's on Windows.
E:\mining\zecMiner\ZecMiner64.exe -zpool ssl://us1-zcash.flypool.org:3443 -zwal t1xxxxxx -zpsw x -i 8 -allpools 1
here's the log which matches the console - showing onlyGPU1s GPU0's
12:15:19:472 42fc parse packet: 22
12:15:19:474 42fc ZEC: Share accepted (109 ms)!
12:15:19:476 42fc new buf size: 0
12:15:43:525 3710 GPU0 t=64C fan=99%
12:15:43:527 3710 em hbt: 0, fm hbt: 62,
12:15:43:529 3710 watchdog - thread 0, hb time 312
12:15:43:531 3710 watchdog - thread 1, hb time 93
I'm getting the temp displayed on Afterburner, so the driver/card is able to supply the data...
thanks
Running 2 RX470's on Windows.
E:\mining\zecMiner\ZecMiner64.exe -zpool ssl://us1-zcash.flypool.org:3443 -zwal t1xxxxxx -zpsw x -i 8 -allpools 1
here's the log which matches the console - showing only
12:15:19:472 42fc parse packet: 22
12:15:19:474 42fc ZEC: Share accepted (109 ms)!
12:15:19:476 42fc new buf size: 0
12:15:43:525 3710 GPU0 t=64C fan=99%
12:15:43:527 3710 em hbt: 0, fm hbt: 62,
12:15:43:529 3710 watchdog - thread 0, hb time 312
12:15:43:531 3710 watchdog - thread 1, hb time 93
I'm getting the temp displayed on Afterburner, so the driver/card is able to supply the data...
thanks
I just spotted this "Claymores BTG Miner v12.6" https://github.com/poolgold/ClaymoreBTGMiner/releases . I've been doing some test mining of Bitcoin Gold with Claymore's ZCash miner and it work OK, so what is different with Claymores Bitcoin Gold miner compared to the ZCash miner ?
Following
Why I can't get -cclock 1000,1050,1100,0 works?
Using Windows 10 1709 Blockchain Driver and mod GPU Bios.
Using Windows 10 1709 Blockchain Driver and mod GPU Bios.
The majority of GPUs hash close to 300sol/s, but some do only 60, and one or two are stuck at 20.
Is there any rationale behind this? If so, what am I supposed to do to get the dodgy ones to hash at decent speed??
EDIT: ah, ignore this. I just reduced intensity by one notch on the slow cards and this solved that. All peachy.
I just spotted this "Claymores BTG Miner v12.6" https://github.com/poolgold/ClaymoreBTGMiner/releases . I've been doing some test mining of Bitcoin Gold with Claymore's ZCash miner and it work OK, so what is different with Claymores Bitcoin Gold miner compared to the ZCash miner ?
Following
Anybody ever had any luck getting old Cayman (6950, 6970) cards to work with this?
I tried under Ubuntu 16.04 and ran into an OpenCL wall, the AMD drivers only work up to 14.04 and the open source drivers don't support the older cards.
I tried under Win7 and the cards got hot, but just returned incorrect data to the pool.
I tried under Ubuntu 16.04 and ran into an OpenCL wall, the AMD drivers only work up to 14.04 and the open source drivers don't support the older cards.
I tried under Win7 and the cards got hot, but just returned incorrect data to the pool.
They work but you will get like 5 H/S
Mine XMR with those dinosaur GPUs. You can also mine any dagger coins if you got 2GB of memory.
The blockchain drivers work fine. The latest drivers should also work fine.
I have a few vega 56 cards flashed to 64. I'm trying claymore's with the same settings I use for mining cryptonight, but it's not stable at all (that is 1408/875 gpu and 1100/900hbm). Power draw is about 160W/card (total), so in line with cryptonight.
I'm getting 440sol/s per card. Is that ok to pushing it too much ? All this is on blockchain drivers.
What would be good startup settings for the vega ?
I'm getting 440sol/s per card. Is that ok to pushing it too much ? All this is on blockchain drivers.
What would be good startup settings for the vega ?
In EWBF miner, you can get efficiency stats that show sols per watt and approximate wattage of each card. Does this miner have that capability? I don't see a command listed for it.
The AMD power output does not include the power draw from the PCIE slot. So it is not accurate.
In EWBF miner, you can get efficiency stats that show sols per watt and approximate wattage of each card. Does this miner have that capability? I don't see a command listed for it.
I just spotted this "Claymores BTG Miner v12.6" https://github.com/poolgold/ClaymoreBTGMiner/releases . I've been doing some test mining of Bitcoin Gold with Claymore's ZCash miner and it work OK, so what is different with Claymores Bitcoin Gold miner compared to the ZCash miner ?
Hello,
I have a problem mining with AMD Vega 64 on Windows 10 PRO (RX580 Works fine)
[2017-10-28 18:50:06.664] [info] [GPU4] Device info: {"id": "1/4" "name": "gfx900" "platform": "AMD" "driver": "2442.9 (PAL,HSAIL)"}
[2017-10-28 18:50:06.680] [error] Build Status: -2
[2017-10-28 18:50:06.682] [error] Build Log:
Error: AMD HSA Code Object loading failed.
I have a problem mining with AMD Vega 64 on Windows 10 PRO (RX580 Works fine)
[2017-10-28 18:50:06.664] [info] [GPU4] Device info: {"id": "1/4" "name": "gfx900" "platform": "AMD" "driver": "2442.9 (PAL,HSAIL)"}
[2017-10-28 18:50:06.680] [error] Build Status: -2
[2017-10-28 18:50:06.682] [error] Build Log:
Error: AMD HSA Code Object loading failed.
i got a saphier r9 380 nitro runing at stock 1010 1450 geting 205 h/s temps 58c fan runing at 62% but if i oc 1040 1580 +15%pwr i get 225 h/s temp goes up to 63 but fan no diferent cant get it past 1600 with out problems
thanks i forgot the memory clock for tonga it seems only is good for eth or monero Jump to: