Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 44. (Read 3839395 times)
ok so i just downloaded claymore what do i wrote in my bat file cause i have no idea i want to mine some hush i read articles but i don't understand sh*t
Anyone else using Suprnova with Claymore 12.5 for Zcash, and then switched over the HUSH?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
You got it. If there were any issues you'd see authorization/connection errors when claymore starts. If you see that you are finding shares with your setup, then you are in fact mining hush successfully.
Thanks for insight!
While I'm at it, any recommendations for a Hush wallet? What are you using for Hush if you don't mind me asking?
Anyone else using Suprnova with Claymore 12.5 for Zcash, and then switched over the HUSH?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
You got it. If there were any issues you'd see authorization/connection errors when claymore starts. If you see that you are finding shares with your setup, then you are in fact mining hush successfully.
Anyone else using Suprnova with Claymore 12.5 for Zcash, and then switched over the HUSH?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
I literally... just changed the zpool address from Supnova Zcash to Suprnova Hush, since everything else was intact for my Suprnova setup, I used the same worker name, etc... and now I'm mining on Hush...
I just wanted to know if I was missing anything, or ift hat's how it's done?
Anyone tried use multiple Fury X cards? Although the VBIOS has been updated to the latest one which claims to support UEFI, it still cannot enter motherboard bios after enable Above 4G decoding in MSI motherboard.
Someone has the real VBIOS for R9 Fury X that supports UEFI GOP, appreciated it if you could share it.
Someone has the real VBIOS for R9 Fury X that supports UEFI GOP, appreciated it if you could share it.
Announcement
http://zcrypt.live
Zcrypt.live will start it's opening celebration with a 0% pool fee for two weeks.
From 7/2/2017 until 7/16/2017 there will be 0% pool fee.
** Keep an eye out for the PIMP my Rig contest coming soon.**
http://zcrypt.live
Zcrypt.live will start it's opening celebration with a 0% pool fee for two weeks.
From 7/2/2017 until 7/16/2017 there will be 0% pool fee.
** Keep an eye out for the PIMP my Rig contest coming soon.**
@Claymore, is support for Nvidia cards down the road? Or developing such compatibility is not planned?
I think Claymore will let other developers make a living.
Between EWBF and Nicehash, ZEC support for NVidia is pretty well covered already.
@Claymore, is support for Nvidia cards down the road? Or developing such compatibility is not planned?
I would like to know that too.
@Claymore, is support for Nvidia cards down the road? Or developing such compatibility is not planned?
Guys I just want to revive my AMD 7970 GPU as a miner. Do you guys think it can mine decently with zcash? I just need some feedbacks and opinions about zcash mining and to find new GPU .
7970 = pre-rebadge R9 280X (bios mods and slightly slower RAM) - they should do over 300 sol/s easily with some OC tweeking.
They're much better on ZEC than they are on ETH.
All my 7970 are doing ZEC.
Hello Guys I m with the 12,4 version and I have problem.
The miner is autorestarting and this problem start 2-3 days ago before I didnt had this problem.
Did some1 knows how to fix that? Thanks in advanced!!!
The miner is autorestarting and this problem start 2-3 days ago before I didnt had this problem.
Did some1 knows how to fix that? Thanks in advanced!!!
did you check the log of the miner? you had maybe a gpu what crash
Yes it was gpu crash , but what is causing this? Before i didnt have this problem.
Driver update, card is older, O/S update.... back the O/C down a couple digits and it'll probably fix it
could be overclocked to much
when card get older, it overclock less high than when it was new
i notice that with my r9 270's , first 4 month they run at 1090mhz after i always had to decrease clock speed now 2 years later they not stable on 24h more than 1020 i run them on 1010 now same for memory run at 1500 for long time (1400stock) but now they run at 1460 got sometimes a crash at 1470
also notice msi fan are not good quality, 2 years only , 3 fan on 8 are working bad, 1 gpu need to put fan at 100% because it spin half speed, does not start anymore at low speed
Guys I just want to revive my AMD 7970 GPU as a miner. Do you guys think it can mine decently with zcash? I just need some feedbacks and opinions about zcash mining and to find new GPU .
7970 = pre-rebadge R9 280X (bios mods and slightly slower RAM) - they should do over 300 sol/s easily with some OC tweeking.
They're much better on ZEC than they are on ETH.
Guys I just want to revive my AMD 7970 GPU as a miner. Do you guys think it can mine decently with zcash? I just need some feedbacks and opinions about zcash mining and to find new GPU .
7970 is excellent for ZEC.
With Claymore you can do with 7970 about 350-370sols with overlock
7950 do about 300sols
https://en.wikibooks.org/wiki/ZCash_mining_GPU_Comparison
7950 do about 300sols
https://en.wikibooks.org/wiki/ZCash_mining_GPU_Comparison
Guys I just want to revive my AMD 7970 GPU as a miner. Do you guys think it can mine decently with zcash? I just need some feedbacks and opinions about zcash mining and to find new GPU .
Guys I just want to revive my AMD 7970 GPU as a miner. Do you guys think it can mine decently with zcash? I just need some feedbacks and opinions about zcash mining and to find new GPU .
Does "Claymore's ZCash AMD GPU Miner v12.5" compatible with 1070 cards? If so, whats the configuration for these cards?
Which part of "AMD GPU Miner" did you not understand?
It is better to same the Clamore ZEC miner is for AMD cards only.
Does "Claymore's ZCash AMD GPU Miner v12.5" compatible with 1070 cards? If so, whats the configuration for these cards?
Which part of "AMD GPU Miner" did you not understand?
Hello Guys I m with the 12,4 version and I have problem.
The miner is autorestarting and this problem start 2-3 days ago before I didnt had this problem.
Did some1 knows how to fix that? Thanks in advanced!!!
The miner is autorestarting and this problem start 2-3 days ago before I didnt had this problem.
Did some1 knows how to fix that? Thanks in advanced!!!
did you check the log of the miner? you had maybe a gpu what crash
Yes it was gpu crash , but what is causing this? Before i didnt have this problem.
Driver update, card is older, O/S update.... back the O/C down a couple digits and it'll probably fix it
Does "Claymore's ZCash AMD GPU Miner v12.5" compatible with 1070 cards? If so, whats the configuration for these cards?
I love it when someone posts the exact same question in different forums.....
Claymore is an AMD GPU miner, 1070's are NVIDIA GPU's
he even says it on the first page: builds for Windows x64 and Linux x64. No 32-bit support. No NVidia support.
please spend 2 minutes reading the instructions/forums, you would have spent less time reading it than posting your question in multiple forums
Jump to: