Topic: [CLOSE] [Group Buy #2 @136/50] ASICMiner Erupter USB 2.03636 each @ 5 units (Read 15476 times)
June 28, 2013, 12:53:45 PM
mods, please close this thread
June 28, 2013, 12:45:01 PM
I did, but it looks like I'm the only one.
no, or the feedback only shows up if it's from a trusted member.
what does my numbers say?
June 28, 2013, 04:01:27 AM
I did, but it looks like I'm the only one.
June 27, 2013, 10:10:14 PM
If ya'll bought Miners from Canary, why not give the man some trust points!
June 06, 2013, 01:17:44 AM
MikeMike, you're gonna become an expert at this!! 
Thanks! It helps...
honestly heartwarming to witness such an evolution =)
June 06, 2013, 12:30:07 AM
Group buy #5 is setup here: https://bitcointalksearch.org/topic/open-usacanada-grp-buy-5-16550-asicminer-erupter-usb-204236-ea-5-units-226656
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys!Please, Could those who can consider posting relevant information to setting up your mining rigs for the USB Erupters here:
https://bitcointalksearch.org/topic/m.2326671
Hope this is not considered spam.
June 06, 2013, 12:26:44 AM
Group buy #5 is setup here: https://bitcointalksearch.org/topic/open-usacanada-grp-buy-5-16550-asicminer-erupter-usb-204236-ea-5-units-226656
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys!Please, Could those who can consider posting relevant information to setting up your mining rigs for the USB Erupters here:
https://bitcointalksearch.org/topic/m.2326671
Hope this is not considered spam.
June 06, 2013, 12:15:32 AM
Group buy #5 is setup here: https://bitcointalksearch.org/topic/open-usacanada-grp-buy-5-16550-asicminer-erupter-usb-204236-ea-5-units-226656
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys!Please, Could those who can consider posting relevant information to setting up your mining rigs for the USB Erupters here:
https://bitcointalksearch.org/topic/m.2326671
Hope this is not considered spam.
June 05, 2013, 11:22:03 PM
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys!
June 05, 2013, 10:17:00 PM
June 05, 2013, 07:52:36 PM
Received my unit today. Packed very well, fast ship. CITM is da bomb!
June 04, 2013, 11:25:07 PM
My order arrived at noon on Tuesday in Las Vegas. Thanks a lot!
your welcome!! 
June 04, 2013, 05:17:08 PM
My order arrived at noon on Tuesday in Las Vegas. Thanks a lot!
June 04, 2013, 05:01:19 PM
Hoping people don't have to RMA these puppies and that they last a long time. Although I understand there is a lifetime warranty on the board, it would be a PITA to ship back to China!
June 04, 2013, 03:58:32 PM
ICA 0: | 457.3M/394.7Mh/s | A:189 R: 6 HW: 2 U: 4.09/m
ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
that's just variance over time, however, feel free to send back. and pay return postage, I will send you different sticks.ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
you may want to give it a few hours there...
edit- on second glance, your HW errors are pretty high on those... where is it plugged in? are they in a dead airflow zone? post a pic plz..
It appears my computer was just smoking some crack or something....
No matter what order I plugged them in, logical positions 2 and 3 were always getting hardware errors. So I unplug them all and try them one at a time... they all work. I start with one and add one at a time. I get to the last one, and it still works. I've got no idea what my problem was before, but it seems to have worked itself out. Thanks for the eagerness to resolve the issue, but it looks like I'm okay.
June 04, 2013, 03:11:51 PM
My wife says mine just arrived at home. Opened them up to find a red and a black erupter. Thanks Canary - you clearly do an amazing job with all of your group buys (incredible turn around upon receiving them!) and you're an asset to the community.
Your hard work is very much appreciated by all of us!
your welcome!! Your hard work is very much appreciated by all of us!
June 04, 2013, 03:11:33 PM
LOL! But I'm depressed. Total network hash rate has shot through the roof the past 1-2 weeks. I believe the next difficulty increase is going to be up 25%-33%!!
My lonely 333 MH/s erupter is going to be pitiful lol!
get more! sell off those GPUs... LOL My lonely 333 MH/s erupter is going to be pitiful lol!
June 04, 2013, 03:08:10 PM
ICA 0: | 457.3M/394.7Mh/s | A:189 R: 6 HW: 2 U: 4.09/m
ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
that's just variance over time, however, feel free to send back. and pay return postage, I will send you different sticks.ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
you may want to give it a few hours there...
edit- on second glance, your HW errors are pretty high on those... where is it plugged in? are they in a dead airflow zone? post a pic plz..
June 04, 2013, 02:58:17 PM
ICA 0: | 457.3M/394.7Mh/s | A:189 R: 6 HW: 2 U: 4.09/m
ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
ICA 1: | 507.6M/400.2Mh/s | A:187 R:10 HW: 2 U: 4.04/m
ICA 2: | 128.7M/307.5Mh/s | A: 42 R: 3 HW:50 U: 0.91/m
ICA 3: | 322.7M/308.0Mh/s | A: 19 R: 2 HW:52 U: 0.41/m
ICA 4: | 486.5M/393.3Mh/s | A:177 R: 4 HW: 2 U: 3.83/m
ICA 5: | 490.5M/396.3Mh/s | A:212 R: 6 HW: 2 U: 4.59/m
ICA 6: | 519.4M/402.0Mh/s | A:186 R:12 HW: 1 U: 4.02/m
ICA 7: | 473.4M/402.4Mh/s | A:203 R:10 HW: 2 U: 4.39/m
ICA 8: | 490.4M/402.3Mh/s | A:200 R:10 HW: 1 U: 4.33/m
ICA 9: | 268.2M/401.3Mh/s | A:207 R:10 HW: 2 U: 4.48/m
ICA 2 and ICA 3 have way high HW errors and way low accepted shares... is there an RMA process?
June 04, 2013, 01:50:27 PM
+1 Worth every satoshi paid! lol
Jump to: