Topic: [CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less - page 27. (Read 55882 times)

  that number is outdated actually... I need to update it, but it's a low priority atm.

Based on this number 15.16TH/s - 15,161,963 MH/s MH/s producing; i would like to ask you to stop distributing to everyone except me as you are helping that difficulty to go up. Thank you!



And on a serious note, i will be ordering something just not sure what just yet.

Reserved

diagram for new blade setup: http://www.minersource.net/asicminer-blade/4579132096

Received a few PMs about USB hubs, here's a good thread on it: https://bitcointalksearch.org/topic/which-usb-hub-to-use-with-block-erupters-nanofury-nf1-bpmc-red-fury-ant-u1-253749
how to send a shipping label:
you will essentially download that pdf label from usps and email it to [email protected] (email used for labels only, contact with questions via PM here)
thank you BorisAlt for putting together a quick how-to guide: https://bitcointalksearch.org/topic/m.2928336 (shipping from zip 60181)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
--------------------------
here's an example of a signed message you email me with an attached label (each lines corresponds to #1,2,3,4 from above paragraph):
d9192cc3d48721355e897317d6164be6702b5d26bd38e613fc1b973a7c157a7b
15aJAPshhWsNJRYx4FnjYPd9fer8XM1cNT
940550XX9930002541000
IFqkkue7+x5Mc/eWgwywD9VpECiRXoRAW1MuUXPL+8HTjH3uApW5wbfYcRBiLZCPq+3jczkS/xfO5WdcreG1pmE=

guidelines for your own labels:

small priority box fits 14 USB miners
medium priority box fits 100 USB miners
large priority box fits 140 USB miners
20 USB miners fit into a flat-rate padded envelope (Priority or Express)
Region A Priority box fits up to 72 USB miners (not a single over 72!) weight: 10 miners weigh (10*35+20 grams) /~456 to get pounds. so 10 USB miners are: 370/456= .811 pounds or*16 = 13 oz

New Blade Shipping boxes:
- up to 4 blades fit into a medium priority box.
- up to 4 blades fit into express flat rate box.
- 1 blade fits into either priority or express padded envelope.
- up to 3 blades WILL fit into Region A box (each blade is 2 pounds)
- large priority box: up to 6 blades.
Backplane: fits into Regional Box B (only!!) does not fit into other USPS provided boxes.
--------------------------
If you are a re-seller on eBay or other outlets, I can handle your shipping of USB miners.
- you sell
- send me the appropriate label (pdf) you generate for your sold order.
- I ship from zip 60181
- sit back and relax... don't bother shipping. I do that with my elves for you.

Thanks,

Canary

I have 49-port Hubs back in stock, but no USBs.  Hubs only. PM me for quotes etc...

Only blades are available at this point

I have extra backplanes for blades.  asking price .25 btc (requires Region B label) no reasonable offer refused.

A single blade is 0.65 btc. 10 blades get a backplane (while supplies last)  For multiple blades (2+), PM me for a quote
Payment address: 1L3XSZpfsZtEXLwDDYjJfJHncaPxAngAyV

11/01/2013: friedcat is out of USBs whatever remains on hand with resellers is it folks.  They are EOL.

10/28/2013: the 49 port hubs are here and shipping: https://bitcointalksearch.org/topic/m.3428585 (<-- more pics here)


10/18/2013:  Shipping update: I can now ship 4 blades PLUS a backplane using 1 Priority Large Flat Rate Box label OR 6 blades can be shipped using just 1 Priority Large Flat Rate Box label.

I am flattered that my distribution approach has been copied.  I must be doing something right.  

-----------------------------------------------------
.035 for any qty of USB miners

qty 500+ PM me.

for those with fedex accounts, on orders of 500+ you can send me a Fedex ground label.

10 blades require 2 medium priority boxes PLUS Region B box, or just 2 Large Priority Boxes.

New colors are available for you to get your hands on: https://bitcointalksearch.org/topic/block-eupter-usb-august-batch-update-280961

no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalksearch.org/topic/official-asicminer-hardware-information-270573
International buyers: please contact your respective re-seller: https://bitcointalksearch.org/topic/official-asicminer-hardware-information-270573

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

To generate your own label for me to ship with (such as USPS.com/FedEx) : .035btc per unit. (check post #2, will post more instructions there)
how to create a shipping label by BorisAlt: https://bitcointalksearch.org/topic/m.2971486 (shipping from zip 60181)

V2 Blades:
Price: 1.1 btc
for large volume orders, PM me for price and for drop-shipping instructions.




As listed here: https://bitcointalksearch.org/topic/block-erupter-blade-new-modellow-price-limited-quantity-286486
~10.7 Gh/s. fixed speed. not over-clockable. USB connection available.
Spec: 10GHhash/s guaranteed.
         Rated speed 10.752GHash/s.
         200mm x 160mm in size.

15.16TH/s - 15,161,963 MH/s MH/s producing, ASICMiner USBs and Blades have been distributed by me so far.

I am located 4 miles from a MAJOR DHL and FedEx hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

Status updates:

don't have enough funds to order?  btcQuick allows anyone to buy bitcoins with their credit card or debit card. Simply sign up, submit verification documentation, then buy bitcoins! Bitcoins are delivered within 15minutes! Fee's start at 7.5% and can be as low as 5.5% visit the page here: https://www.btcQuick.com

2013-08-18: HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalksearch.org/topic/m.2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalksearch.org/topic/help-how-do-i-sign-a-message-using-my-blockchaininfo-address-180068 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to [email protected] (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.

Product Description:
USB Erupter:
    Each one mines at more than 330MH/s, powered only by the USB port.
    It serves as a replacement of GPUs for mining hobbyists.
    Your GPUs could be freed from calculating hashes and resume rendering for you.
    It is also a perfect gift for getting people to learn about Bitcoin and Bitcoin mining.
    The Sapphire Batch:
    This is the first batch under production in quantity.
    Color of PCB changed to blue
    Adding a LED which blinks when a share is found
    Fixing the cgminer compatibility problem
    Reducing the heat generated and the current to <500mA


The world's smallest Bitcoin miner, powered by the world's first Bitcoin mining ASIC.

----------------------
Note, local pickup is no longer available for orders less than 100 units.

Ordering:

There is one common payment address: 1L3XSZpfsZtEXLwDDYjJfJHncaPxAngAyV

To buy:

pick the number of ASICMiner Block Erupter USBs and/or Blades to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary