[CLOSED] BTC Guild - Pays TxFees+NMC, Stratum, VarDiff, Private Servers - page 236.

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: demonmaestro on September 20, 2013, 03:50:48 PM

This is how its setup.
Don't be hating on my MSPaint skills. Cool

I got my 3 erupters in the mail early. Any they are BLUE!

*Jumps up and down* I feel like a kid in a candy store. Thank you eleuthria. Cool

Side note: I have tried playing with ubuntu server and folllowed the instructions and it cannot see any of my erupters on the computer. I have tried that with 5 dlink hubs pluged into 1 dlink hub then plgued into the computer and no luck. 50 of thies little things are becoming more of a hassle. How do ya do it? Huh

I'm running 51 on ubuntu linux. no rhyme or reason to my hubs, i just keep trying things untill they all work. I woke up this morning to half of them with green lights. It took rebooting the computer to get them all to come back.

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: BTCGuild Support

1: Open Terminal or SSH into your Linux machine.

2: Run "apt-get update"

3: Run "apt-get install git autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev"

4: Run "git clone git://github.com/luke-jr/bfgminer.git"

5: Enter the bfgminer directory

6: Run "./autogen.sh"

7: Run "./configure" (if you do not want to use GPUs on the machine, add --disable-opencl)

8: Run "make"

9: After make completes, you can run bfgminer directly (may require sudo), or create a shell script that includes your arguments.

The only thing that i see i maybe missing is libudev-dev

Whats the difference in libidev-dev and libudev-dev?

Subo1977

sr. member

Activity: 344

Merit: 250

Flixxo - Watch, Share, Earn!

Quote from: demonmaestro on September 20, 2013, 03:50:48 PM

This is how its setup.
Don't be hating on my MSPaint skills. Cool

I got my 3 erupters in the mail early. Any they are BLUE!

*Jumps up and down* I feel like a kid in a candy store. Thank you eleuthria. Cool

Side note: I have tried playing with ubuntu server and folllowed the instructions and it cannot see any of my erupters on the computer. I have tried that with 5 dlink hubs pluged into 1 dlink hub then plgued into the computer and no luck. 50 of thies little things are becoming more of a hassle. How do ya do it? Huh

I think there are missing the "libidev-dev"
Look here for the actual dependencies and Build Instructions
https://github.com/luke-jr/bfgminer/blob/bfgminer/README

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

yea i know its not that much but its paying for its own power plus bringing in extra. so im making my money back. Its just getting them up online is the issue.

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: demonmaestro on September 20, 2013, 03:50:48 PM

... 50 of thies little things are becoming more of a hassle. How do ya do it? Huh

50 x .335 = only 16.75 GH/s

Yeah not much hashing power there ... for all the effort to set them up ...

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

This is how its setup.
Don't be hating on my MSPaint skills. Cool

I got my 3 erupters in the mail early. Any they are BLUE!

*Jumps up and down* I feel like a kid in a candy store. Thank you eleuthria. Cool

Side note: I have tried playing with ubuntu server and folllowed the instructions and it cannot see any of my erupters on the computer. I have tried that with 5 dlink hubs pluged into 1 dlink hub then plgued into the computer and no luck. 50 of thies little things are becoming more of a hassle. How do ya do it? Huh

HellDiverUK

hero member

Activity: 1246

Merit: 501

Anker 10 ports are 3 hubs chained internally.

Also note some PCs can have a hub internally too, especially cheaper/older laptops.

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: eleuthria on September 19, 2013, 11:17:44 PM

Quote from: demonmaestro on September 19, 2013, 11:08:25 PM

Soo did you send me 3 more silver ones? Cheesy

If you dont know then i guess i have to wait till monday.

Side note. My computer is having issues with 50 erupters i got 2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub. i cant figure out if its a hub bad or if its too many erupters. it ran fine with 38 but when i pluged in the other 3 dlink hubs it started not working. any ideas?

I find USB to be very touchy when you start getting to the 50+ device range, especially when chaining hubs. While it can be done, it gets very touch & go. I personally preferred to use 4-port unpowered USB 2 hubs connected to the PC, then chained my hubs with erupters off of those.

As for colors: Most of the recent shipments have been silver. Blue has been sent upon request when possible. There's ~200 left to ship as Silver, at which point it will resume being red. I haven't opened them up to see if these are the older dark red, the lighter red, or the red with the circular rings.

I gave up and ordered a Blue one on eBay. Tongue

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: os2sam on September 20, 2013, 05:49:55 AM

Quote from: demonmaestro on September 19, 2013, 11:08:25 PM

2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub.

Win7 says that you can't go more than 5 deep on chaining USB Hubs.

And be aware that most of the larger hubs are already chained inside ...

os2sam

legendary

Activity: 3583

Merit: 1094

Think for yourself

Quote from: demonmaestro on September 19, 2013, 11:08:25 PM

2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub.

Win7 says that you can't go more than 5 deep on chaining USB Hubs.

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: xstr8guy on September 20, 2013, 12:45:24 AM

My Anker (and clones) hubs are starting to suffer from power supply failures now. I would check that out first by swapping known working power supplies into failing hubs to see if that works. I've ordered some replacement power brinks from Amazon that have a little more juice to see if that does the trick.

Just cut the leads off the failing bricks, solder on a molex connector, and run them off a PC PSU. You're wasting your time and money replacing bricks, they just aren't designed for 24/7 running at high load.

I run all mine off the same PSU that powers my Blades. Far more efficient too, I'm saving 20W by running my hubs off the ATX supply rather than the Anker hub supplies. Plus I don't have to worry about a meltdown.

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: demonmaestro on September 19, 2013, 11:08:25 PM

Soo did you send me 3 more silver ones? Cheesy

If you dont know then i guess i have to wait till monday.

Side note. My computer is having issues with 50 erupters i got 2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub. i cant figure out if its a hub bad or if its too many erupters. it ran fine with 38 but when i pluged in the other 3 dlink hubs it started not working. any ideas?

My Anker (and clones) hubs are starting to suffer from power supply failures now. I would check that out first by swapping known working power supplies into failing hubs to see if that works. I've ordered some replacement power brinks from Amazon that have a little more juice to see if that does the trick.

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

So what would you recomend using then for hubs?

eleuthria

legendary

Activity: 1750

Merit: 1007

Quote from: demonmaestro on September 19, 2013, 11:08:25 PM

Soo did you send me 3 more silver ones? Cheesy

If you dont know then i guess i have to wait till monday.

Side note. My computer is having issues with 50 erupters i got 2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub. i cant figure out if its a hub bad or if its too many erupters. it ran fine with 38 but when i pluged in the other 3 dlink hubs it started not working. any ideas?

I find USB to be very touchy when you start getting to the 50+ device range, especially when chaining hubs. While it can be done, it gets very touch & go. I personally preferred to use 4-port unpowered USB 2 hubs connected to the PC, then chained my hubs with erupters off of those.

As for colors: Most of the recent shipments have been silver. Blue has been sent upon request when possible. There's ~200 left to ship as Silver, at which point it will resume being red. I haven't opened them up to see if these are the older dark red, the lighter red, or the red with the circular rings.

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Soo did you send me 3 more silver ones? Cheesy

If you dont know then i guess i have to wait till monday.

Side note. My computer is having issues with 50 erupters i got 2 anker hubs and 7 dlink-dub-h7 hubs. that are all pluged into an anker hub. i cant figure out if its a hub bad or if its too many erupters. it ran fine with 38 but when i pluged in the other 3 dlink hubs it started not working. any ideas?

eleuthria

legendary

Activity: 1750

Merit: 1007

Pool has been moving between 390 and 400 TH/s most of the day back and forth. Will update the thread topic once the 24-hour average speed hits 400

.

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

It probly was at ther for a moment. Shocked

jarhed

sr. member

Activity: 672

Merit: 254

Quote from: Tigggger on September 19, 2013, 05:49:02 PM

Another milestone passed for the pool, congrats eleuthria

Quote

Pool Speed 400,334 GH/s

Not yet.

Tigggger

legendary

Activity: 1098

Merit: 1000

Another milestone passed for the pool, congrats eleuthria

Quote

Pool Speed 400,334 GH/s

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: demonmaestro on September 15, 2013, 10:19:19 PM

Quote from: Trongersoll on September 15, 2013, 10:08:45 PM

Quote from: Trongersoll on September 15, 2013, 09:58:02 PM

Quote from: eleuthria on September 15, 2013, 09:54:09 PM

Quote from: Trongersoll on September 15, 2013, 08:48:38 PM

I've lost track and am confused, did he say he has silver and blue erupters on hand or coming in? I don't want to order before he has them and end up with black or red ones. Huh