Topic: [CLOSED] BTC Guild - Pays TxFees+NMC, Stratum, VarDiff, Private Servers - page 33. (Read 903206 times)
October 13, 2014, 04:56:29 AM
I know this has probably been covered a million times, but is there any way of changing a locked BTC payout address? I know, it's locked for a reason. But, I haven't mined for a good while, and when I logged in to BTCGuild I noticed a small number of coins sitting there under an old BTC address I no longer have.
October 10, 2014, 08:25:26 PM
We're due for a nice fuckin' run.
(cracks neck)
C'mon block - youre about to get a whoopin.
(cracks neck)
C'mon block - youre about to get a whoopin.
October 09, 2014, 10:21:23 AM
Unfortunately it looks like I may be shutting down before I can get to 30 billion unless the price of BTC is on the rebound.
It seems to be rebounding right now. Unless it's a dead cat bounce. 
October 09, 2014, 03:00:18 AM
Just passed 25 billion shares submitted. 
Unfortunately it looks like I may be shutting down before I can get to 30 billion unless the price of BTC is on the rebound.
Unfortunately it looks like I may be shutting down before I can get to 30 billion unless the price of BTC is on the rebound.
October 09, 2014, 01:15:19 AM
The default difficulty for workers has been increased from 4 to 32. Existing worker settings have not been changed, and new workers can be adjusted back down to lower levels if desired. The filtering server (the server you initially connect to) has also been updated to a difficulty of 16 before it will redirect you to the appropriate backend/loadbalancer. As usual, the filtering server is only accessed for a single submission when you first attempt a connection to stratum.btcguild.com or eu-stratum.btcguild.com.
October 08, 2014, 08:06:18 AM
Did bitmain say if they would replace the controller in the next batch - or will they just keep using the workaround (i.e. hack)?
They weren't even clear on if and when they'd use the hack, but the only US contact I have took the patch. I can only hazard a guess that there is zero chance of them using a different controller this late in their production phase.As for btcguild, to stay on topic, it's probably time you further increased the minimum/starting diff here anyway given what hardware is left hashing these days.
October 08, 2014, 07:51:38 AM
I'm a little confused tbh, as ck says:
Which to me sounds like a hardware issue - or is it the firmware that decides how much power is provided to the controller?
It's not a firmware issue. The controller hardware they bundle with it is not fast enough to handle running at low diffs, and most pools start at a lower diff for a while before vardiff pushes them up. If they stay low diff long enough the controller never catches up. I gave them a driver code workaround (i.e. hack) to get over this hurdle. It means they'll (appear to) run at low hashrates for a while until the pool reaches a diff suitable for the device. When they say it's a firmware issue, they mean they'll offer new firmware with an updated cgminer to address the issue.It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
Which to me sounds like a hardware issue - or is it the firmware that decides how much power is provided to the controller?
Ah, that explains it - thanks ck. Did
I get the feeling bitmain are paying the wrong person......
October 08, 2014, 07:09:30 AM
I'm a little confused tbh, as ck says:
Which to me sounds like a hardware issue - or is it the firmware that decides how much power is provided to the controller?
It's not a firmware issue. The controller hardware they bundle with it is not fast enough to handle running at low diffs, and most pools start at a lower diff for a while before vardiff pushes them up. If they stay low diff long enough the controller never catches up. I gave them a driver code workaround (i.e. hack) to get over this hurdle. It means they'll (appear to) run at low hashrates for a while until the pool reaches a diff suitable for the device. When they say it's a firmware issue, they mean they'll offer new firmware with an updated cgminer to address the issue. It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
Which to me sounds like a hardware issue - or is it the firmware that decides how much power is provided to the controller?
October 08, 2014, 07:07:31 AM
Batch 10 of the S3+ has just been put on sale by Bitmain at BTC0.58.
October 08, 2014, 07:01:40 AM
It is a firmware issue.
They are working on it now.
They are working on it now.
Shame they didn't work on it before shipping them:
Our R&D team is testing the latest firmware, we will upload it to our official website once it is ready.
Aren't you supposed to test the firmware before shipping them?
I'm a little confused tbh, as ck says:
It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
Which to me sounds like a hardware issue - or is it the firmware that decides how much power is provided to the controller?
October 08, 2014, 02:13:23 AM
It is a firmware issue.
They are working on it now.
...which is exactly what happened with the S4...
It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
So it's a hardware issue then?
They are working on it now.
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Occasionally they ping us after the fact and expect us to fix their problems. It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
So it's a hardware issue then?
October 07, 2014, 07:54:11 AM
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Occasionally they ping us after the fact and expect us to fix their problems. It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
So it's a hardware issue then?
October 07, 2014, 05:26:59 AM
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Occasionally they ping us after the fact and expect us to fix their problems. It turns out the controller is so low powered that it can only process ~30 shares per second which mean that unless diff is set higher, they work their way into a death spiral before diff catches up. Great...
October 07, 2014, 02:37:28 AM
The S4 works great on BTCGuild. Just set difficulty for its worker to 2048.
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Seems the new Bitmaintech S4's will only work on the Guild.......
Expect your hash rate to go up
Expect your hash rate to go up
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
October 06, 2014, 01:42:33 PM
I hate to say it but my SP10s get a better hashrate here although I hate the luck.
I withdraw! or maybe not...
October 06, 2014, 12:10:18 AM
I agree.
It makes no sense.
It makes no sense.
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
That's because more and more of them doing their drivers and cgminer forks all themselves and don't involve us any more. Occasionally they ping us after the fact and expect us to fix their problems. It's a bizarre hardware+software disconnect landscape... October 05, 2014, 07:58:35 PM
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
That's because more and more of them doing their drivers and cgminer forks all themselves and don't involve us any more. Occasionally they ping us after the fact and expect us to fix their problems. It's a bizarre hardware+software disconnect landscape... October 05, 2014, 06:00:16 PM
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
That's because more and more of them doing their drivers and cgminer forks all themselves and don't involve us any more. Occasionally they ping us after the fact and expect us to fix their problems. It's a bizarre hardware+software disconnect landscape... October 05, 2014, 05:12:44 PM
Seems the new Bitmaintech S4's will only work on the Guild.......
Expect your hash rate to go up
Expect your hash rate to go up
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Everything I've ever mined with from 1st gen stuff to the most recent gear has worked best at the Guild. I have several old Bitfury rigs still running and they only like it here. They didn't even work well on GHash and that's their bread & butter miner, lol.
I hate to say it but my SP10s get a better hashrate here although I hate the luck.
October 04, 2014, 05:34:50 PM
Seems the new Bitmaintech S4's will only work on the Guild.......
Expect your hash rate to go up
Expect your hash rate to go up
And others say they don't work on Guild...I love how it seems ASICs are becoming even less consistent than their first generation units.
Everything I've ever mined with from 1st gen stuff to the most recent gear has worked best at the Guild. I have several old Bitfury rigs still running and they only like it here. They didn't even work well on GHash and that's their bread & butter miner, lol.
Jump to: