Pages:
Author

Topic: [CLOSED] | 🔥 Coinpayments.net Signature Campaign 🔥 | 100% SegWit | - page 12. (Read 31341 times)

legendary
Activity: 2646
Merit: 2691
Join the world-leading crypto sportsbook NOW!
Payment for Bi-Week 12 has been released: https://blockchain.info/tx/0cc7b477d5ba3c4ff05d6ba2ef194a11bbf999944cfbd61303923042fe6b8939.

I'll be urging people to switch to SegWit (native or encapsulated) again, and those addresses will be marked in green.

Payment received. Glad to see new SegWit address is working correctly Smiley

I wish all Coinpayments campaign participants happy and prosperous New Year.
legendary
Activity: 2674
Merit: 2965
Terminated.
Payment for Bi-Week 12 has been released: https://blockchain.info/tx/0cc7b477d5ba3c4ff05d6ba2ef194a11bbf999944cfbd61303923042fe6b8939.

I'll be urging people to switch to SegWit (native or encapsulated) again, and those addresses will be marked in green.
legendary
Activity: 2674
Merit: 2965
Terminated.
Payment now confirmed, been able to use transaction accelerator and seems it worked.  Grin
Very good! Although the 350sat/byte fee range has cleared out today anyways.

3FcesxFpjqrLUo5QJyehw6B1dhk2pWYCB9
Updated. Please double check the sheet.

Thread locked to avoid shitposter spamming even though there are no open slots. PM me for address changes and other inquiries.
sr. member
Activity: 1008
Merit: 297
Grow with community
Payment now confirmed, been able to use transaction accelerator and seems it worked.  Grin

thank you for great work Lauda, by the way kindly update my Address, was able to use electrum, newly installed

3FcesxFpjqrLUo5QJyehw6B1dhk2pWYCB9

cheers!
legendary
Activity: 2674
Merit: 2965
Terminated.
bc1quakjhplncm7dzylplpd473kq9jh90y2zwc4t3s

Lauda, please update my address in the sheet.
Updated. Double check. Make sure you have full control to that one. I will slap you with a trout if you lose your funds. Tongue
copper member
Activity: 1330
Merit: 899
🖤😏
I have no hardware wallet.
Snip.

That... is not a multisig address. It's a segwit address. You better not use that address to receive bitcoin, because you just gave your private key away.


Importing a segwit address shows a legacy address? and there are no web wallets supporting segwit addresses?

bc1quakjhplncm7dzylplpd473kq9jh90y2zwc4t3s

Lauda, please update my address in the sheet.
legendary
Activity: 2674
Merit: 2965
Terminated.
How do I spend from it? there is no cosigner here, this was generated with segwitaddress.org could I import the private key and spend? I imported it and it showed a legacy address.
Do you have a Ledger or Trezor?

Thank you for the payment.
And am really happy with the bi weekly system, saves me from spending everything Cheesy

Good to hear that it will continue till January 🙌
Thanks.
hero member
Activity: 1890
Merit: 831
Payment received but still 0 confirmations.
It will take a while, but both RBF and CPFP are ready.

The campaign is switching to a bi-weekly payment model in order to make our use of block space more efficient (from ~4 KB per month to ~2 KB per month). Everyone who is affected by this has been notified, changes to the thread have been made and changes to the sheet are in progress.

Thank you for the payment.
And am really happy with the bi weekly system, saves me from spending everything Cheesy

Good to hear that it will continue till January 🙌
legendary
Activity: 1232
Merit: 1030
give me your cryptos
I can't use an address starting with 3, too complicated for a beggar like me, I don't know as to why would I need to be my own cosigner, when I create a multisig wallet on Electrum, I have no cosigner pub key to provide when it asks me, I only have a seed and a master pub key. since I have no cosigner pub key to insert I would have to cancel the wallet creation process and start over, when I do start over, this time I have the master pub key from the first wallet and I would create a wallet with prefix 3. what happens when I try to spend from that wallet? I would have to open that first half finished wallet with seed and then sign the transaction? what ever I found about this, is a complicated procedure, I don't need to be my cosigner.
I'm officially begging you, don't make me do this, because even if I'd lose the funds, I would provide you an address with a prefix 3. (note that I'm in the process of impressing you, if you are really a girl, (wait, what if I'm not supposed to reveal my plans to you?).

This is a multisig address: 3BPo57Hq42oUGNNVe94ZZaj4gQKywAMghx

Private key: L2uudsa69QYdHH5S8f5TsGzaHJ5Lsrmi9AVYtQwhR3sZoS97xkrQ

How do I spend from it? there is no cosigner here, this was generated with segwitaddress.org could I import the private key and spend? I imported it and it showed a legacy address.

That... is not a multisig address. It's a segwit address. You better not use that address to receive bitcoin, because you just gave your private key away.

copper member
Activity: 1330
Merit: 899
🖤😏
I can't use an address starting with 3, too complicated for a beggar like me, I don't know as to why would I need to be my own cosigner, when I create a multisig wallet on Electrum, I have no cosigner pub key to provide when it asks me, I only have a seed and a master pub key. since I have no cosigner pub key to insert I would have to cancel the wallet creation process and start over, when I do start over, this time I have the master pub key from the first wallet and I would create a wallet with prefix 3. what happens when I try to spend from that wallet? I would have to open that first half finished wallet with seed and then sign the transaction? what ever I found about this, is a complicated procedure, I don't need to be my cosigner.
I'm officially begging you, don't make me do this, because even if I'd lose the funds, I would provide you an address with a prefix 3. (note that I'm in the process of impressing you, if you are really a girl, (wait, what if I'm not supposed to reveal my plans to you?).

This is a multisig address: 3BPo57Hq42oUGNNVe94ZZaj4gQKywAMghx

Private key: L2uudsa69QYdHH5S8f5TsGzaHJ5Lsrmi9AVYtQwhR3sZoS97xkrQ

How do I spend from it? there is no cosigner here, this was generated with segwitaddress.org could I import the private key and spend? I imported it and it showed a legacy address.
legendary
Activity: 3906
Merit: 6249
Decentralization Maximalist
Thanks for clarification! I'll look if there is a service I use that doesn't still support bech32, otherwise I'll change the address in my profile.
legendary
Activity: 2674
Merit: 2965
Terminated.
Lauda, I also have no problem with the change. I've already created a Segwit Electrum wallet with Bech32 addresses. If there is no problem sending the coins there (I'm not too familiar with it still), then I'll immediately change the address in my profile to one of these addresses.
Segwit is fine for now. If you intend on holding, then you can use Bech32. There's nothing wrong with Bech32, other than a lot of services and wallets not recognizing it yet (it has the status draft anyways).

Only one question: As far as I understand the PM, this week (until Dec 26) there is still a weekly payout, is this right? (If not, there's no problem with it.)
No. The next payment is on the 2nd of January. I've mentioned next week in case that someone has a problem with the immediate change; they can thus contact me privately.

legendary
Activity: 2646
Merit: 2691
Join the world-leading crypto sportsbook NOW!
Only one question: As far as I understand the PM, this week (until Dec 26) there is still a weekly payout, is this right? (If not, there's no problem with it.)

I believe it starts immediately. If you check the spreadsheet you can see the time frame from 19.12.2017. till 02.01.2018.

I am OK with payments every two weeks. I have no clue about segwit addresses for the moment, or what bech32 or encapsulated P2SH means. But no problem I am good at googling things Smiley and always willing to learn.
legendary
Activity: 3906
Merit: 6249
Decentralization Maximalist
Lauda, I also have no problem with the change. I've already created a Segwit Electrum wallet with Bech32 addresses. If there is no problem sending the coins there (I'm not too familiar with it still), then I'll immediately change the address in my profile to one of these addresses.

Only one question: As far as I understand the PM, this week (until Dec 26) there is still a weekly payout, is this right? (If not, there's no problem with it.)

Thank you for the excellent management of the campaign.
full member
Activity: 490
Merit: 106
Patiently waiting for the payments to be confirmed.
I think there is no problem if the payout will be changed to bi-weekly, if it will be good for the campaign.
Thank you Lauda for always updating us.
legendary
Activity: 2674
Merit: 2965
Terminated.
(hey, no getting hit with a trout this time...progress) Smiley
Damn it..it is so hard to resist..

If you need a SW address starting with btc1, don't expect an uneducated beggar to provide you with one, but I will do anything for you.
That's a bech32 address, or a native SegWit address. A encapsulated P2SH will do fine (i.e. a SegWit address starting with a 3).

I created a multisig wallet but only saved xpub and seed, then I created another wallet and provided the xpub of the first one as the cosigner of the second one, this address is from the second wallet, when I want to send funds with it, do I need to open the first wallet? how about segwitaddress.org if I give you an address generated by segwitaddress.org all I'd need is the private key without the need for a cobeggar? can I lol once without getting hit by that already dead trout?

34sKRPi1Wvkrr4W7or8qw3QPdcnxFZi5RF
You're supposed to hold both keys. I recommend using Electrum (create new wallet using the latest version if you already have one), or Ledger/Trezor to get a SegWit address.
copper member
Activity: 1330
Merit: 899
🖤😏
If you need a SW address starting with btc1, don't expect an uneducated beggar to provide you with one, but I will do anything for you.
I created a multisig wallet but only saved xpub and seed, then I created another wallet and provided the xpub of the first one as the cosigner of the second one, this address is from the second wallet, when I want to send funds with it, do I need to open the first wallet? how about segwitaddress.org if I give you an address generated by segwitaddress.org all I'd need is the private key without the need for a cobeggar? can I lol once without getting hit by that already dead trout?

34sKRPi1Wvkrr4W7or8qw3QPdcnxFZi5RF
copper member
Activity: 2898
Merit: 1465
Clueless!
Payment received but still 0 confirmations.
It will take a while, but both RBF and CPFP are ready.

The campaign is switching to a bi-weekly payment model in order to make our use of block space more efficient (from ~4 KB per month to ~2 KB per month). Everyone who is affected by this has been notified, changes to the thread have been made and changes to the sheet are in progress.


No problem. Whatever makes your life a bit easier.

We all appreciate your hard work and the securing of funds for this campaign.....and all the other day to day maintenance and/or issues.

Thanks a lot.

Brad

(hey, no getting hit with a trout this time...progress) Smiley

legendary
Activity: 2674
Merit: 2965
Terminated.
Payment received but still 0 confirmations.
It will take a while, but both RBF and CPFP are ready.

The campaign is switching to a bi-weekly payment model in order to make our use of block space more efficient (from ~4 KB per month to ~2 KB per month). Everyone who is affected by this has been notified, changes to the thread have been made and changes to the sheet are in progress.
legendary
Activity: 3696
Merit: 4343
The hacker spirit breaks any spell

Thank you Lauda for payment
And very good news for signature campaign
This happen because you work good
Pages:
Jump to: