just a quick question
when i put the payment wallet address KcFUN6XVhSQE81nh4bLs6pvbbfxaY1CAn
into the blockchain it comes up as an error
so what am i doing wrong thanks
Topic: [Closed] New ASICMiner Block Erupters - In Hand - .13 BTC + Shipping. Sold Out! - page 2. (Read 3110 times)
September 15, 2013, 06:03:53 PM
September 15, 2013, 05:32:33 PM
Honestly, the way people are looking at this new seller is ridiculous, he is just offering an alternative for people, its like Mcd's and BK they offer basically the same things at slightly different prices, but ultimately it's "YOUR" decision. No one is holding a gun to your head and forcing you to purchase from one or the other. Give this guy some slack and go watch some reruns on TV or go back to your MMORPG. Thank you kind sir for the service you are offering to everyone. 
September 15, 2013, 05:18:53 PM
Let me say the term "YOU GUYS" Is a general term here.. not going to finger point directly
You guys really gotta stop undercutting each other to where you have no room for negotiation for the guys who are spending $5000-$10,000 a week with you... SERIOUSLY
No way some guy selling 50 a week should even be able to compete with someone ordering and selling 300-500 a week... NOT EVEN CLOSE
Its become so cutthroat by the distributers that they are driving the bigger resellers away in liu of a small order.... Maybe its time friedcat get more involved and protect his investment (HIS MARKET)
PROTECT YOUR MARKET!
You guys really gotta stop undercutting each other to where you have no room for negotiation for the guys who are spending $5000-$10,000 a week with you... SERIOUSLY
No way some guy selling 50 a week should even be able to compete with someone ordering and selling 300-500 a week... NOT EVEN CLOSE
Its become so cutthroat by the distributers that they are driving the bigger resellers away in liu of a small order.... Maybe its time friedcat get more involved and protect his investment (HIS MARKET)
PROTECT YOUR MARKET!
Did you consider the possibility that perhaps the problem isn't the new reseller stepping in and offering the same product for less... but could instead be existing resellers taking too much profit margin?
As an example... the coupons being offered for .10, to pay an additional 50% of that is stupid. Those that bought for coupons won't make ROI on the devices, even at the coupon price.. but resellers made BANK.
Not taking anything away from existing resellers.. the services they offer are top notch. But there is obviously good money to be made as a reseller...
The manufacturer lowering the price ever other week doesn't help either I expect... and just screws those stuck with inventory.
September 15, 2013, 05:01:15 PM
My order of another 14 arrived in perfect order, thanks again 
September 15, 2013, 04:40:32 PM
I did not believe they would be .09 btc which is why I asked him. I will most likely stick with canary but my support is with both you and canary as the two of you have been around for a while.
Not knocking the new guy but the sales are dying off on ebay as I type. what we really need is a better stick. not a third reseller.
Not knocking the new guy but the sales are dying off on ebay as I type. what we really need is a better stick. not a third reseller.
I concur with philip, we need a new device, something with 2 to 3x the current power and in stock today to keep the interest/sales going. Most of the people that have bought or are buying on ebay and other outlets are realizing the same thing that we have long ago, ROI...
yep. they love the ease of use but not the hash power. one very good thing is they have purchased lots of hubs . so f - cat please get us a better stick. people will buy them
September 15, 2013, 02:26:10 PM
I did not believe they would be .09 btc which is why I asked him. I will most likely stick with canary but my support is with both you and canary as the two of you have been around for a while.
Not knocking the new guy but the sales are dying off on ebay as I type. what we really need is a better stick. not a third reseller.
Not knocking the new guy but the sales are dying off on ebay as I type. what we really need is a better stick. not a third reseller.
I concur with philip, we need a new device, something with 2 to 3x the current power and in stock today to keep the interest/sales going. Most of the people that have bought or are buying on ebay and other outlets are realizing the same thing that we have long ago, ROI...
September 15, 2013, 02:13:12 PM
If I am not mistaken, next group buys for these will start under 0.1 each in the next few hours.
what source do you have for a .09 a stick price?
SilentSonicBoom said the price is coming down today but he hasn't been told what the new price will be(as of 10 hours ago at-least)
I'm hoping asic blades drop to under 3BTC so I can pick up another one.
I'm not worried about the usb asics as once you include the usb hub the $/mh/s is way higher than the blades.
I did not believe they would be .09 btc which is why I asked him. I will most likely stick with canary but my support is with both you and canary as the two of you have been around for a while.
Not knocking the new guy but the sales are dying off on ebay as I type. what we really need is a better stick. not a third reseller.
September 15, 2013, 02:11:38 PM
There are 3 US resellers and we can handle all the orders just fine. There's not a lack of resellers, but there's a lack in demand as difficulty rises. Most demand nowadays is spurred by when the next price drop comes...
To add more sellers would mean that there's more useless throat cutting for 4-5 days following a price drop. There are resellers who always misprice ASICMiner gear which leads to a reduction of interested sellers on eBay for example. (Theres no margin for them). So more resellers (who are really distributors, not resellers) would wipe out those who sell on other outlets. Which will decline overall sales.
ASICMiner doesn't need more distributors, it needs more resellers who buy from distributors, IFF distributors would price items correctly.
I'm going to go with Canary on this one. Unfortunately with lack of further evidence as a reseller (especially a statement from Friedcat) I'm putting my BTC with the resellers that have been providing me with good service, good product, GREAT shipping and great communication. Adding another reseller would just boggle this up.
Don't mean to thread-crap here just my .02BTC
September 15, 2013, 02:05:15 PM
What advantages do you have over the existing distributors of ASICMiner hardware and what references? You say directly from Friedcat but he doesn't list you as an authorized retailer?
I have units in hand and my handling fees are reasonable. Canary and Silent are great sellers, I've purchased units in the past from both of them. However, it is apparent that 2 distributors may not be enough to handle all USA orders. I've asked friedcat to be considered for USA distribution, and this is my first shipment.
I'm in Dallas Texas, a major shipping hub, so units will be coming in and going out as quickly as possible.
SilentSonicBoom
September 15, 2013, 01:55:18 PM
If I am not mistaken, next group buys for these will start under 0.1 each in the next few hours.
what source do you have for a .09 a stick price?
SilentSonicBoom said the price is coming down today but he hasn't been told what the new price will be(as of 10 hours ago at-least)
I'm hoping asic blades drop to under 3BTC so I can pick up another one.
I'm not worried about the usb asics as once you include the usb hub the $/mh/s is way higher than the blades.
September 15, 2013, 01:47:04 PM
I don't like it, your not very responsive, nor active as a seller. you tell me to PM you, I do, and you still haven't replied, BUT you have replied to this thread.
Check your PM. I'm on the road today, I will respond to the bulk of PMs tonight. I have been an active seller on the forums for the past 2 years.
September 15, 2013, 01:41:27 PM
I don't like it, your not very responsive, nor active as a seller. you tell me to PM you, I do, and you still haven't replied, BUT you have replied to this thread.
September 15, 2013, 01:33:05 PM
What advantages do you have over the existing distributors of ASICMiner hardware and what references? You say directly from Friedcat but he doesn't list you as an authorized retailer?
I have units in hand and my handling fees are reasonable. Canary and Silent are great sellers, I've purchased units in the past from both of them. However, it is apparent that 2 distributors may not be enough to handle all USA orders. I've asked friedcat to be considered for USA distribution, and this is my first shipment.
I'm in Dallas Texas, a major shipping hub, so units will be coming in and going out as quickly as possible.
To add more sellers would mean that there's more useless throat cutting for 4-5 days following a price drop. There are resellers who always misprice ASICMiner gear which leads to a reduction of interested sellers on eBay for example. (Theres no margin for them). So more resellers (who are really distributors, not resellers) would wipe out those who sell on other outlets. Which will decline overall sales.
ASICMiner doesn't need more distributors, it needs more resellers who buy from distributors, IFF distributors would price items correctly.
BTCGuild is not selling at wholesale prices. From my point of view, there are 2 resale distributors available. I've experienced shipping delays first hand from both distributors when units are in hand. I've also paid exorbitant shipping fees for coupon units in excess of 50 units($300+ at .05BTC per unit). I've expressed my concerns with friedcat and he has agreed to consider me as another distributor.
This is not a bad thing guys, it means higher availablity for buyers and less workload on the current distributors. This is my first run with bulk units from from friedcat. If all goes well, I expect he will be adding my name to the list of authorized sellers.
September 15, 2013, 01:01:49 PM
What advantages do you have over the existing distributors of ASICMiner hardware and what references? You say directly from Friedcat but he doesn't list you as an authorized retailer?
I have units in hand and my handling fees are reasonable. Canary and Silent are great sellers, I've purchased units in the past from both of them. However, it is apparent that 2 distributors may not be enough to handle all USA orders. I've asked friedcat to be considered for USA distribution, and this is my first shipment.
I'm in Dallas Texas, a major shipping hub, so units will be coming in and going out as quickly as possible.
To add more sellers would mean that there's more useless throat cutting for 4-5 days following a price drop. There are resellers who always misprice ASICMiner gear which leads to a reduction of interested sellers on eBay for example. (Theres no margin for them). So more resellers (who are really distributors, not resellers) would wipe out those who sell on other outlets. Which will decline overall sales.
ASICMiner doesn't need more distributors, it needs more resellers who buy from distributors, IFF distributors would price items correctly.
This.
Although for special one-time large orders for customers it would be nice if emailed friedcat wasnt Russian ruelette.
September 15, 2013, 12:57:57 PM
What advantages do you have over the existing distributors of ASICMiner hardware and what references? You say directly from Friedcat but he doesn't list you as an authorized retailer?
I have units in hand and my handling fees are reasonable. Canary and Silent are great sellers, I've purchased units in the past from both of them. However, it is apparent that 2 distributors may not be enough to handle all USA orders. I've asked friedcat to be considered for USA distribution, and this is my first shipment.
I'm in Dallas Texas, a major shipping hub, so units will be coming in and going out as quickly as possible.
To add more sellers would mean that there's more useless throat cutting for 4-5 days following a price drop. There are resellers who always misprice ASICMiner gear which leads to a reduction of interested sellers on eBay for example. (Theres no margin for them). So more resellers (who are really distributors, not resellers) would wipe out those who sell on other outlets. Which will decline overall sales.
ASICMiner doesn't need more distributors, it needs more resellers who buy from distributors, IFF distributors would price items correctly.
September 15, 2013, 12:34:30 PM
10+ units and will ship anywhere, PM me, thanks!
Update 05:54 AM UTC 2013-09-16:
International shipping only available for zones not covered by official distributors. Please contact teek for canada orders.
Update 05:54 AM UTC 2013-09-16:
International shipping only available for zones not covered by official distributors. Please contact teek for canada orders.
September 15, 2013, 12:16:46 PM
You are able to ship to Canada right?
September 15, 2013, 11:58:33 AM
I am on the road and will respond to questions this afternoon.
September 15, 2013, 11:42:55 AM
your shipping rates are not logical.
a small flat rate box is about .05 btc it will fit 14 sticks so shipping of .12 btc for 11 sticks is too high.
a small flat rate box is about .05 btc it will fit 14 sticks so shipping of .12 btc for 11 sticks is too high.
Shipping rates include handling.
September 15, 2013, 11:40:30 AM
What advantages do you have over the existing distributors of ASICMiner hardware and what references? You say directly from Friedcat but he doesn't list you as an authorized retailer?
I have units in hand and my handling fees are reasonable. Canary and Silent are great sellers, I've purchased units in the past from both of them. However, it is apparent that 2 distributors may not be enough to handle all USA orders. I've asked friedcat to be considered for USA distribution, and this is my first shipment.
I'm in Dallas Texas, a major shipping hub, so units will be coming in and going out as quickly as possible.
Jump to: