[CLOSED][GRIDSEED SHIPPED] As Low as $93 Plug&Play 5-Chip Miners | $1375 Blades - page 12.

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: dp007 on March 24, 2014, 05:46:02 PM

Can anyone confirm if their factory controller is able to mine 10 devices?
Mine seems like only nine are mining but the 10th one is not.

I'm assuming it's the Gridseed wiibox - yes, it can handle 10 units. Find out which one is not mining, swap cables, maybe you have a bad connection. If the controller can see the device but no shares are submitted make sure to give it enough time. It may take 20 minutes on a high difficulty pool to start accepting shares.

dp007

newbie

Activity: 18

Merit: 0

Can anyone confirm if their factory controller is able to mine 10 devices?
Mine seems like only nine are mining but the 10th one is not.

dp007

newbie

Activity: 18

Merit: 0

Quote from: suchmoon on March 24, 2014, 02:48:57 PM

Quote from: dp007 on March 24, 2014, 02:08:36 PM

So far what I learned from the package I received is, seems like is not really a plug and play. Looks like I will have to spent lot of time on PSU connections.
Anyone know where to find instructions? Please help.

What do you have? "Pigtails" with a barrel connector on one end, and two naked wires on the other end? And a PSU with screw terminals? This shouldn't take more than 15 minutes, get a screwdriver and make sure to connect the wire from the center of the barrel connector (probably a red one) to the "+" terminal and the other one to the "-".

Edit: stole this picture from another thread (don't trust the colors, verify polarity):

http://i.snag.gy/owEyi.jpg

http://i.snag.gy/owEyi.jpg

Thank you for your response.

I googled it found the instructions here.
https://litecointalk.org/index.php?topic=16620.msg135696#msg135696

So far, I was able to connect all by cutting the wire ends etc...

Now I am also able to get to the controllers web page where I think I need to setup the pool info.
That page comes in Chinese language.... Somehow guessed to put URL, user and password, hit the blue button (I guess that's the save button)... waiting to see what's next ...

almightyruler

legendary

Activity: 2268

Merit: 1092

Quote from: suchmoon on March 24, 2014, 02:48:57 PM

Quote from: dp007 on March 24, 2014, 02:08:36 PM

So far what I learned from the package I received is, seems like is not really a plug and play. Looks like I will have to spent lot of time on PSU connections.
Anyone know where to find instructions? Please help.

What do you have? "Pigtails" with a barrel connector on one end, and two naked wires on the other end? And a PSU with screw terminals? This shouldn't take more than 15 minutes, get a screwdriver and make sure to connect the wire from the center of the barrel connector (probably a red one) to the "+" terminal and the other one to the "-".

Not sure about dp007 but the pigtails I received only have very short amounts stripped from the internal wires (maybe 3-4mm) and the sheath covering them (10mm). To fit them to the power supply will require further work.

FWIW, I'd be really really careful wiring a mains cord to a PSU. I have experience with mains wiring but I'm playing it safe * by using an ATX PSU instead.

* You can still cause sparks or a fire with an ATX PSU if you short the output, and it doesn't have sufficient protection (or it's a high amp rail), but at least you don't have semi-exposed mains terminals that could potentially electrocute you.

Fassade

member

Activity: 71

Merit: 10

Hi! I already get the miners, are all connected but I got a detail, the Wiibox said: confine/define.php is not existes.

What can I do? Huh

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: dp007 on March 24, 2014, 02:08:36 PM

So far what I learned from the package I received is, seems like is not really a plug and play. Looks like I will have to spent lot of time on PSU connections.
Anyone know where to find instructions? Please help.

What do you have? "Pigtails" with a barrel connector on one end, and two naked wires on the other end? And a PSU with screw terminals? This shouldn't take more than 15 minutes, get a screwdriver and make sure to connect the wire from the center of the barrel connector (probably a red one) to the "+" terminal and the other one to the "-".

Edit: stole this picture from another thread (don't trust the colors, verify polarity):

http://i.snag.gy/owEyi.jpg

dp007

newbie

Activity: 18

Merit: 0

So far what I learned from the package I received is, seems like is not really a plug and play. Looks like I will have to spent lot of time on PSU connections.
Anyone know where to find instructions? Please help.

dp007

newbie

Activity: 18

Merit: 0

Atari & Team,

I received the kit today (batch-4). But I did not get the raspberry pi controller as described, instead I see a tiny PCB with one ethernet and a USB port (I guess that the factory controller).
I could not find instructions either in the box. Could you please send instructions to setup?
Let's see its really a plug and play?

shootme

newbie

Activity: 32

Merit: 0

According to DHL, my order is waiting in SHENZHEN - SHENZHEN - CHINA, PEOPLES REPUBLIC since Friday. What is the delay?

pakole69

full member

Activity: 266

Merit: 100

OPEN Platform - Powering Blockchain Acceptance

Quote from: gruber_69 on March 24, 2014, 08:55:36 AM

Atari can You confirm shipping date 25th?
I can't afford any further delays in shipping. You stated that package will be delivered to me on 25th...

Same as you, and in this coin world time is money...

Flep182

legendary

Activity: 938

Merit: 1007

Any news on my refund?

almightyruler

legendary

Activity: 2268

Merit: 1092

This thread needs public updates rather than invitations to PM. Yes, there may be some specific issues with specific orders, but in general.....

I've now received my product (batch 3) but it was very difficult to get a straight answer in PM. It wasn't until I posted in this thread that I finally received a tracking number.

I understand that atari02 has probably been overwhelmed by the response, but it seems really unfair that people from the same batch as me were receiving their miners a couple of days after the ship date, while mine didn't even leave China until at least a week later. I think some of #4 may have even shipped before mine.

Again, public updates would help. A promise such as "I will update you during the day" carries a much higher expectation of fulfillment if it's posted publically.

darkjed

member

Activity: 68

Merit: 10

Hi atari02

It's been a couple weeks since I sent you payment for 10 miners. I'm part of batch 4 Just wondering when mine will get shipped?

gruber_69

newbie

Activity: 33

Merit: 0

Atari can You confirm shipping date 25th?
I can't afford any further delays in shipping. You stated that package will be delivered to me on 25th...

pakole69

full member

Activity: 266

Merit: 100

OPEN Platform - Powering Blockchain Acceptance

have you sent some package from batch 5?

24Kilo

sr. member

Activity: 672

Merit: 250

Alex,

I need a shipment of Gridseeds sent to Australia, wanted to get in on the shipment tomorrow(Tuesday, 25 March), but have not received an invoice or payment details from you..

Please contact me by Skype or PM ASAP.

24Kilo

Edit: as always it was great chatting to you... am awaiting invoice so payment can be made... thanks!

atari02

member

Activity: 112

Merit: 10

Quote from: dp007 on March 21, 2014, 02:49:14 PM

BATCH#4:

Checked my email box and PM inbox.
Nothing in it, either tracking info or about the refund info.
For the refund I have already PMed you my BTC wallet address on 18th.
I am not sure if you are getting my PMS, but they do show up in my outbox.

I got your PMs, sorry for the late reply. Instead of the BTC, the paypal refund is working now. Check paypal you should be able to see it in your account sometime today.

Alex

atari02

member

Activity: 112

Merit: 10

Quote from: manfred87 on March 24, 2014, 05:01:05 AM

atari02, you did not reply to my pm-order from 18 March 2014, 11:34
that is a little too slow, i am not interested anymore..

Hi, I thought I did reply you. I'm sorry to hear you decided that.

For you or any other customers, we have moved over all retail operations to www.gawminers.com. The support there is superb and we have a special deal with them for the current groupbuy which includes free 1 year hosting. Check them out if you are interested.

Cheers

atari02

member

Activity: 112

Merit: 10

Quote from: Kapz786 on March 24, 2014, 02:59:00 AM

Quote from: atari02 on March 22, 2014, 02:08:40 PM

Quote from: Kapz786 on March 22, 2014, 09:54:29 AM

Atari I'm a batch 4 customer who has been given promises of "shipping next day" for over a week and have no tracking information

I would STRONGLY discourage other members from purchasing until this is addressed there are far better and cheaper competitors out there

Hi Kapz786,

Sorry consecutively disappointing you. As we were going to finish the last 10% of batch 4 on Saturday. It didn't happen due to an unforeseen problem in the warehouse that day. I have PM you with details on how we want to make this up to you.

We have bene overwhelmed with the fulfilment of order and have recently partnered up with a big group to solve this issue. Moving forward, the process will be a lot smoother for all our customers. For anyone one that has yet to receive a tracking number for batch #4 please PM.

Cheers

Hi Atari02 I still need a tracking number and confirmation of the deal you offered me please respond

hi, PM resent. I sent you one on 22 March. In this PM tracking number is there too.

Cheers

manfred87

full member

Activity: 201

Merit: 100

atari02, you did not reply to my pm-order from 18 March 2014, 11:34
that is a little too slow, i am not interested anymore..

Topic: [CLOSED][GRIDSEED SHIPPED] As Low as $93 Plug&Play 5-Chip Miners | $1375 Blades - page 12. (Read 36061 times)