Pages:
Author

Topic: [closed]USA/Canada [Buy #3 @135/50] ASICMiner Erupter USB 2.03636 each @ 5 units - page 2. (Read 12284 times)

legendary
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
Does anyone here know which 10 port USB hub other than ANKERs,  works?

D link has least errors with cooling.

https://bitcointalksearch.org/topic/m.2326671
full member
Activity: 164
Merit: 100
Does anyone here know which 10 port USB hub other than ANKERs,  works?
donator
Activity: 2352
Merit: 1060
between a rock and a block!
Thank you Stale for your generous tip!! Grin
member
Activity: 116
Merit: 10
Wooo!  Happy green shipping statuses!   Grin
donator
Activity: 2352
Merit: 1060
between a rock and a block!
All green SHIPPING statuses have shipped out.
I'll PM tracking numbers later.
member
Activity: 84
Merit: 10
folks, I'll have an update in an hour -1.5 on message status signing...
most everything should be out today.

Thanks for the update with the verification status! Now I get to figure out how to  F5 my physical mailbox Wink
donator
Activity: 2352
Merit: 1060
between a rock and a block!
folks, I'll have an update in an hour -1.5 on message status signing...
most everything should be out today.
donator
Activity: 2352
Merit: 1060
between a rock and a block!
snip...
I don't know why you've singled out batch 3 for poor communication. You're doing a great job with batch 4, which is sort of annoying. You really need to work on your communication with this thread. Batches 1,2 and 4 seem to provide much clearer feedback and the vague accusations blaming us for not knowing how to sign a message is grating.


He's mining with batch 3 ;-)
no, i'm not doing that... and I will not give in to your temptation attempts!!
sr. member
Activity: 258
Merit: 250
Canary,

Updating the status of verified messages in your original post like you have done in group 1 and 2 and now in group 4 serves two purposes. Many of us see that post long before we check PM. Once verified we can also stop worrying about it. I had trouble sending a verified message intially because I was a newbie. I'm certain I could do it flawlessly now. However, I don't want to send you a second one lest I just confuse the issue. So I am waiting for you to update the original post for group 3. I know you have a day job. Frankly I don't know how you can handle this load. Keep it up. Thanks.
Well said!
I had so much trouble just not understanding that you could send a verified message from an address without sending a payment...So it jailed me for a week!
You guys are right, this whole send message with payment as opposed to just sign any message with an address and send the text is confusing everyone... that's got to be it, I can totally see how it's confusing...

--- i'm going to be incognito for 1 hr, need to finish entering shipping info into insurance system... got 1 hr till cutoff

The updated OP of this thread shows most of us didn't get the signed message right. I have resent you a signed message, the short version, per your instructions in the group 4 thread https://bitcointalksearch.org/topic/m.2343943

Here's hoping you can get group 3's orders out today.

PS - when do you sleep?
Ive done the same. The first pm i sent you wasnt formatted correctly, but now it should be an easy copy and paste to varify.
legendary
Activity: 1554
Merit: 1009
Makes me wonder how much coin could be made IF we all went in on a pool for two weeks @ 600units.

let's see...

0.15/kWh elec, 2.5W per unit, 333MH/s, one units earns BTC0.0138 per day

so 0.0138 x 14 days x 600 units = BTC115.92!!

that's over $14,000usd!

we'd have to divide the profit evenly, let's say by how many units each person had

profit per unit for two weeks: 115.92/600 = BTC0.1932

0.1932/14 = BTC0.0138 per unit per day

where do i sign up?  Cool
hero member
Activity: 630
Merit: 500
Wow, so many unverifiable messages were in batch 3, I barely got any orders out.... I did complete getting batch 2 out.  ran out of time with post office for 3. so that's tomorrow after I get verifiable messages.

It's amazing that even after posting an example with 3 lines only, I still get very long messages that have all kinds of line breaks and spaces that make it impossible for me to verify...

I can't count how many times I keep PM'ing reference to post #2...

Allright... off to FedEx now before it closes...

i believe i sent you a proper PM with the info.  let me know if there are any problems.
newbie
Activity: 12
Merit: 0
Canary,

Updating the status of verified messages in your original post like you have done in group 1 and 2 and now in group 4 serves two purposes. Many of us see that post long before we check PM. Once verified we can also stop worrying about it. I had trouble sending a verified message intially because I was a newbie. I'm certain I could do it flawlessly now. However, I don't want to send you a second one lest I just confuse the issue. So I am waiting for you to update the original post for group 3. I know you have a day job. Frankly I don't know how you can handle this load. Keep it up. Thanks.
Well said!
I had so much trouble just not understanding that you could send a verified message from an address without sending a payment...So it jailed me for a week!
You guys are right, this whole send message with payment as opposed to just sign any message with an address and send the text is confusing everyone... that's got to be it, I can totally see how it's confusing...

--- i'm going to be incognito for 1 hr, need to finish entering shipping info into insurance system... got 1 hr till cutoff

Canary,

After my newbie confusion and the signed message snafu, I wrote up a HOW TO and posted it to the newbie section.  It may eliminate some confusion.  Feel free to link to it. 

https://bitcointalksearch.org/topic/m.2351293

PulsarAV
legendary
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
snip...
I don't know why you've singled out batch 3 for poor communication. You're doing a great job with batch 4, which is sort of annoying. You really need to work on your communication with this thread. Batches 1,2 and 4 seem to provide much clearer feedback and the vague accusations blaming us for not knowing how to sign a message is grating.


He's mining with batch 3 ;-)

Makes me wonder how much coin could be made IF we all went in on a pool for two weeks @ 600units.
full member
Activity: 182
Merit: 100
snip...
I don't know why you've singled out batch 3 for poor communication. You're doing a great job with batch 4, which is sort of annoying. You really need to work on your communication with this thread. Batches 1,2 and 4 seem to provide much clearer feedback and the vague accusations blaming us for not knowing how to sign a message is grating.


He's mining with batch 3 ;-)
legendary
Activity: 2576
Merit: 2267
1RichyTrEwPYjZSeAYxeiFBNnKC9UjC5k
Relax everyone, Canary is NOT BFL!!! THANK GOD!
Are we sure?  I haven't gotten anything from either yet!   Wink

Well, I haven't seen him cuss at anyone and call them stupid so I think we're in good shape so far.
member
Activity: 84
Merit: 10
You guys are right, this whole send message with payment as opposed to just sign any message with an address and send the text is confusing everyone... that's got to be it, I can totally see how it's confusing...

--- i'm going to be incognito for 1 hr, need to finish entering shipping info into insurance system... got 1 hr till cutoff

You have now added verified to a few messages on the first post, but not marked failed messages. I have not received a PM saying there is a problem, but it seems like you've been saying that most of the messages you received from this thread failed verification. So I guess if we are not marked verified we must assume that verification has failed. I sent the message days ago, it would have been nice to have feedback before it affected shipping. I don't know why you've singled out batch 3 for poor communication. You're doing a great job with batch 4, which is sort of annoying. You really need to work on your communication with this thread. Batches 1,2 and 4 seem to provide much clearer feedback and the vague accusations blaming us for not knowing how to sign a message is grating.

I have checked and rechecked the message in my outbox and I am able to verify it so it's not clear whether I have signed incorrectly, whether you are unable to verify messages, or whether you have not gotten around to checking mine yet. So I guess I just have to assume that you are unable to verify it.

I have resent a shorter message containing only the mailing address, hopefully you will have less trouble verifying that.

Yes, I am slightly annoyed because you seem to have spent your time starting Batch 4 early, and giving them feedback about verifying their addresses rather than communicating with us about any problems. Now you've got our devices in hand and this has caused delays in shipping.
full member
Activity: 182
Merit: 100
Canary,

Updating the status of verified messages in your original post like you have done in group 1 and 2 and now in group 4 serves two purposes. Many of us see that post long before we check PM. Once verified we can also stop worrying about it. I had trouble sending a verified message intially because I was a newbie. I'm certain I could do it flawlessly now. However, I don't want to send you a second one lest I just confuse the issue. So I am waiting for you to update the original post for group 3. I know you have a day job. Frankly I don't know how you can handle this load. Keep it up. Thanks.
Well said!
I had so much trouble just not understanding that you could send a verified message from an address without sending a payment...So it jailed me for a week!
You guys are right, this whole send message with payment as opposed to just sign any message with an address and send the text is confusing everyone... that's got to be it, I can totally see how it's confusing...

--- i'm going to be incognito for 1 hr, need to finish entering shipping info into insurance system... got 1 hr till cutoff

The updated OP of this thread shows most of us didn't get the signed message right. I have resent you a signed message, the short version, per your instructions in the group 4 thread https://bitcointalksearch.org/topic/m.2343943

Here's hoping you can get group 3's orders out today.

PS - when do you sleep?
newbie
Activity: 59
Merit: 0
Actually just checked my original PM, which did have line breaks, and the problem turned out to be that when I copy the signature from the PM and paste it into bitcoin-qt, an extra space appears in the middle of the signature.  No idea why.  This causes bitcoin-qt to report that the signature could not be decoded.  Simply deleting that space from the signature allows the message with blank lines to verify.  Sucks that I lost a day with my miners because of this, but there are worse things in life.   Smiley
donator
Activity: 2352
Merit: 1060
between a rock and a block!
Canary,

Updating the status of verified messages in your original post like you have done in group 1 and 2 and now in group 4 serves two purposes. Many of us see that post long before we check PM. Once verified we can also stop worrying about it. I had trouble sending a verified message intially because I was a newbie. I'm certain I could do it flawlessly now. However, I don't want to send you a second one lest I just confuse the issue. So I am waiting for you to update the original post for group 3. I know you have a day job. Frankly I don't know how you can handle this load. Keep it up. Thanks.
Well said!
I had so much trouble just not understanding that you could send a verified message from an address without sending a payment...So it jailed me for a week!
You guys are right, this whole send message with payment as opposed to just sign any message with an address and send the text is confusing everyone... that's got to be it, I can totally see how it's confusing...

--- i'm going to be incognito for 1 hr, need to finish entering shipping info into insurance system... got 1 hr till cutoff
newbie
Activity: 36
Merit: 0
Canary,

Updating the status of verified messages in your original post like you have done in group 1 and 2 and now in group 4 serves two purposes. Many of us see that post long before we check PM. Once verified we can also stop worrying about it. I had trouble sending a verified message intially because I was a newbie. I'm certain I could do it flawlessly now. However, I don't want to send you a second one lest I just confuse the issue. So I am waiting for you to update the original post for group 3. I know you have a day job. Frankly I don't know how you can handle this load. Keep it up. Thanks.
Well said!
I had so much trouble just not understanding that you could send a verified message from an address without sending a payment...So it jailed me for a week!

The process is really quite trivial after you have done it once. I have been in the tech field for 34 years with degrees from three universities. Still I botched it. Sometimes you just need a little hand holding. Maybe I am too old??? LOL!

Canary, My wife does technical writing. Maybe she could simplify the instructions for the retail crowd! Or maybe you should have kept us newbies in the cage longer than four hours!
Pages:
Jump to: