Topic: CNC Pool Report - All your CNC Pool Talk - page 6. (Read 13337 times)
My hashrate is the same since I started and I'm getting paid less and less at the pushpool pool's. It seems I get disconnected every couple of minutes and my cgminer is constantly switching between pools and even local when all my pools go down. This has caused me to make 4x less than I did 48 hours ago. Not sure if p2pool's are better because the DOA/Orphan percentages are like 40%+?? Seems horrible.
I have so many stales, seems like sth is wrong with the network
I've been mining all night at about 700kh (my average on LTC was 1200) and I just got 4 CNC! My daily estimate is 120-150. What happened?
Thanks
Thanks
Pool list is up and running: http://cnc.strament.com/poollist.php
Pool owners:
If you would like me to make changes private message me with what to change
If you would like to have your pool added, PM me with the following:
Pool name
Pool type
Pool fee
Pool website
Pool location
Pool owners:
If you would like me to make changes private message me with what to change
If you would like to have your pool added, PM me with the following:
Pool name
Pool type
Pool fee
Pool website
Pool location
I decided to setup a new P2Pool here:
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
WAY better stale rate than other shitty p2pools. about 20% in my client. You have a link for figuring out my stale/reject on the server side? still don't quite understand p2pool so good.
I decided to setup a new P2Pool here:
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
WAY better stale rate than other shitty p2pools. about 20% in my client. You have a link for figuring out my stale/reject on the server side? still don't quite understand p2pool so good.
Set up a new p2pool at http://188.95.224.183:8800 . Swedish server, latency should be goood. Fees at 3% atm. Hashes and feedback welcomed!
I'm working on a pool list for http://cnc.strament.com
Should have the basic thing done in a few minutes, then we'll add pools.
Should have the basic thing done in a few minutes, then we'll add pools.
Nice 1!
I'm working on a pool list for http://cnc.strament.com
Should have the basic thing done in a few minutes, then we'll add pools.
Should have the basic thing done in a few minutes, then we'll add pools.
Nice thread !
About http://chn.bounceme.net:44397 pool I am still running it but only for whitelisted workers IP.
If you want to try it out, just PM me with your worker IP information.
Bitcoin.Greece can you update the topic about that ?
About http://chn.bounceme.net:44397 pool I am still running it but only for whitelisted workers IP.
If you want to try it out, just PM me with your worker IP information.
Bitcoin.Greece can you update the topic about that ?
all pools suck for me with 99% rejected shares, used above link also still insane amount or rejected and stales
I also get 99% rejected solo mining is that normal?
Sounds like a problem with your setup if all the pools and solo mining is that way.
the setup works fine for every other coin, I get high rejects solo mining, but I still found 3 blocks in a few hours.
all pools suck for me with 99% rejected shares, used above link also still insane amount or rejected and stales
I also get 99% rejected solo mining is that normal?
Sounds like a problem with your setup if all the pools and solo mining is that way.
I also get 99% rejected solo mining is that normal?
all pools suck for me with 99% rejected shares, used above link also still insane amount or rejected and stales
Make sure you have latest cgminer
Remove all your drivers and install latest AMD beta 13.3 drivers
Run this command in your command prompt before mining
Code:
setx GPU_MAX_ALLOC_PERCENT 100
Best i got for you right now
have that will try new cgminer
all pools suck for me with 99% rejected shares, used above link also still insane amount or rejected and stales
Make sure you have latest cgminer
Remove all your drivers and install latest AMD beta 13.3 drivers
Run this command in your command prompt before mining
Code:
setx GPU_MAX_ALLOC_PERCENT 100
Best i got for you right now
all pools suck for me with 99% rejected shares, used above link also still insane amount or rejected and stales
For those who use p2pools and need to get less stales, please check this thread out https://bitcointalksearch.org/topic/anncncp2pool-for-chncoin-on-100mbit-line-with-low-latency-193216
He got pretty nice p2pool setup
He got pretty nice p2pool setup
I decided to setup a new P2Pool here:
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
http://chnpool.yourcoins.org:8400
Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM
Thanks. Sorry for my ignorance: how do i set up my worker username and pass?
Hi all!
New TEST pool...please check
fee: 3%
http://p2pool.web2go.hu:8400/
cgminer example:
cgminer --scrypt -o p2pool.web2go.hu:8400 -u yourCNCaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0
Thanks
New TEST pool...please check
fee: 3%
http://p2pool.web2go.hu:8400/
cgminer example:
cgminer --scrypt -o p2pool.web2go.hu:8400 -u yourCNCaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0
Thanks
Jump to: