Other config in ethOS local.conf
dpm 3
cor 1276
mem 2220
power usage of 126 watts pr card.
The cards runs stable with this config for me.
Topic: Conclusion Sapphire RX580 with Hynix are not that bad. (Read 14112 times)
Hi! i have 3 card of sapphire rx 580 pulse 4gb 113-4E353CU-O4B SK HYNIX. I currentley mining eth on ethOS with claymore 11.9. i get hashrate of 32.2 pr card with temprature around 55-57 celsius. I have bios moded the cards with 1 click bios mod, PolarisBiosEditor 1.6.7
Other config in ethOS local.conf
dpm 3
cor 1276
mem 2220
power usage of 126 watts pr card.
The cards runs stable with this config for me.
Other config in ethOS local.conf
dpm 3
cor 1276
mem 2220
power usage of 126 watts pr card.
The cards runs stable with this config for me.
nice brag
minde sharing straps?
minde sharing straps?
Its here: https://anorak.tech/community/t/tutorial-setting-up-your-sapphire-rx570-rx580-mining-rig-high-hashrate/83269/
nice brag
minde sharing straps?
minde sharing straps?
Some funny conclusions here..
Running all of my Hynix RX580's on 31.4Mh/s from each for past 5 months.
You know where to find additional info
https://image.ibb.co/cOPW67/Screen_Shot_2018_05_05_at_12_52_24_AM.png
https://image.ibb.co/hN1B67/Screen_Shot_2018_05_05_at_12_51_52_AM.png
Startup: EthDcrMiner64.exe -dcri 14 -mvddc 875 -cvddc 875 -tstop 70 -cclock 1200 -mclock 2200 -epool eu1.ethermine.org:4444 -ewal XXXX.xxxxx -epsw x
Drawing 870W from the wall per 6 cards rig.
Running all of my Hynix RX580's on 31.4Mh/s from each for past 5 months.
You know where to find additional info
https://image.ibb.co/cOPW67/Screen_Shot_2018_05_05_at_12_52_24_AM.png
https://image.ibb.co/hN1B67/Screen_Shot_2018_05_05_at_12_51_52_AM.png
Startup: EthDcrMiner64.exe -dcri 14 -mvddc 875 -cvddc 875 -tstop 70 -cclock 1200 -mclock 2200 -epool eu1.ethermine.org:4444 -ewal XXXX.xxxxx -epsw x
Drawing 870W from the wall per 6 cards rig.
i have 6 sapphire rx580s 8gb pulses and can get to 191mh/s. 31mh/s each but over 1100 watts at the wall to 1400.
i have now played with them for a week and get 181.324 avg 30.225 on each BUT only 95 watts a card or so
my rig is now 970 at wall, i have been told i should be at 880 at wall, so a few more plays to do
i have now played with them for a week and get 181.324 avg 30.225 on each BUT only 95 watts a card or so
my rig is now 970 at wall, i have been told i should be at 880 at wall, so a few more plays to do
Anyone has a mod ROM for Sapphire Pulse RX580 8GB with Micron memory. I have 28mhs with 1gpu... I also own models with Hynix memory and after bios rom update it runs with 30mhs.
rx580pulse8GB_30mhs_hynix.rom https://us.v-cdn.net/5021640/uploads/editor/yw/1bv631yaxvnu.zip
---------------------------------------------------------------
Donate here:
BTC: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
ETH: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
Thanks!
Hi for Sapphire RX580 8GB with Micron memory eth 31.5 mh/s low energy mod: http://dosya.co/ifjlk1t8dpsj/Sapphire_Radeon_RX580_8GB_micron_31.5_mhs_eth.rom.htmlrx580pulse8GB_30mhs_hynix.rom https://us.v-cdn.net/5021640/uploads/editor/yw/1bv631yaxvnu.zip
---------------------------------------------------------------
Donate here:
BTC: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
ETH: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
Thanks!
Anyone has a mod ROM for Sapphire Pulse RX580 8GB with Micron memory. I have 28mhs with 1gpu... I also own models with Hynix memory and after bios rom update it runs with 30mhs.
rx580pulse8GB_30mhs_hynix.rom https://us.v-cdn.net/5021640/uploads/editor/yw/1bv631yaxvnu.zip
---------------------------------------------------------------
Donate here:
BTC: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
ETH: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
Thanks!
rx580pulse8GB_30mhs_hynix.rom https://us.v-cdn.net/5021640/uploads/editor/yw/1bv631yaxvnu.zip
---------------------------------------------------------------
Donate here:
BTC: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
ETH: 0xd9e73dfc83c037c247cfcd1f688021549e97ca69
Thanks!
Stop talk a shit about 30,5-31 mh/s with rx 580!!! Yes, its possible to get 31 mh/s but how long?? Rig will shut down after 1 hour, 3 hour..in the best case rig will shut down after 24 h.
No, it doesn't. All of my RX 580 has does 31+ (Hynix and Elpidas). Some even do 32+ but aren't stable.
Hi everyone,
I'm a total novice and having trouble getting my Asus rx580 8g OC Dual Hynix (not Strix) to hash over 20mh. Tried some roms from anorak and it didn't do anything for me. Would the 1.6 one click timing patch be something I could try? Does anyone else have experience with this card and getting it to hash at least in the high 20's? If so, what did you do?
Any help is greatly appreciated (and again, I'm a total beginner) thanks!
I'm a total novice and having trouble getting my Asus rx580 8g OC Dual Hynix (not Strix) to hash over 20mh. Tried some roms from anorak and it didn't do anything for me. Would the 1.6 one click timing patch be something I could try? Does anyone else have experience with this card and getting it to hash at least in the high 20's? If so, what did you do?
Any help is greatly appreciated (and again, I'm a total beginner) thanks!
Asus STRIX RX 580/480's 8GB, Sapphire Pulse RX 580 4GB and a Sapphire Nitro+ RX 570 4GB. All were modded using the 'one click timing patch' from PBE v1.6.
https://bitcointalksearch.org/topic/m.21668411
https://bitcointalksearch.org/topic/m.21668411
Cool, I have a Pulse also and have never gotten over 28 Mh/s. I'll try the once click patch.
Asus STRIX RX 580/480's 8GB, Sapphire Pulse RX 580 4GB and a Sapphire Nitro+ RX 570 4GB. All were modded using the 'one click timing patch' from PBE v1.6.
https://bitcointalksearch.org/topic/m.21668411
https://bitcointalksearch.org/topic/m.21668411
Stop talk a shit about 30,5-31 mh/s with rx 580!!! Yes, its possible to get 31 mh/s but how long?? Rig will shut down after 1 hour, 3 hour..in the best case rig will shut down after 24 h.
I have 3 Sapphire RX 580 8GB Special Edition cards (blue faceplate) with Samsung + Hynix dual timing straps. Easily got them to 30-31 MH/s with 855-865 MH/s DCR dual mining after just flashing the cards using the PBE v 1.6 'one click timing patch' bundled performance straps Bios mod. Cards run very stable with zero memory errors using a 1150 MHz core clock, 2100-2200 MHz memory, -96 mV undervolt and -15% power limit. Awesome cards!
Where do you get this "one click timing patch"?
What are those other cards that are getting less than 30 Mh/s?
Stop talk a shit about 30,5-31 mh/s with rx 580!!! Yes, its possible to get 31 mh/s but how long?? Rig will shut down after 1 hour, 3 hour..in the best case rig will shut down after 24 h.
I have 3 Sapphire RX 580 8GB Special Edition cards (blue faceplate) with Samsung + Hynix dual timing straps. Easily got them to 30-31 MH/s with 855-865 MH/s DCR dual mining after just flashing the cards using the PBE v 1.6 'one click timing patch' bundled performance straps Bios mod. Cards run very stable with zero memory errors using a 1150 MHz core clock, 2100-2200 MHz memory, -96 mV undervolt and -15% power limit. Awesome cards!
Where do you get this "one click timing patch"?
Hello guys.
I have troubles with Sapphire Pulse Rx 580 8gb (Hynix)
With bios mod i can reach only 25 max (stock was 21) with drops .
Maybe someone can share their bios mod with me ?
Email me : [email protected]
ps. Straps with modding were from 2:1750 to 2:2250
Thanks!
I have troubles with Sapphire Pulse Rx 580 8gb (Hynix)
With bios mod i can reach only 25 max (stock was 21) with drops .
Maybe someone can share their bios mod with me ?
Email me : [email protected]
ps. Straps with modding were from 2:1750 to 2:2250
Thanks!
Stop talk a shit about 30,5-31 mh/s with rx 580!!! Yes, its possible to get 31 mh/s but how long?? Rig will shut down after 1 hour, 3 hour..in the best case rig will shut down after 24 h.
I have 3 Sapphire RX 580 8GB Special Edition cards (blue faceplate) with Samsung + Hynix dual timing straps. Easily got them to 30-31 MH/s with 855-865 MH/s DCR dual mining after just flashing the cards using the PBE v 1.6 'one click timing patch' bundled performance straps Bios mod. Cards run very stable with zero memory errors using a 1150 MHz core clock, 2100-2200 MHz memory, -96 mV undervolt and -15% power limit. Awesome cards!
Stop talk a shit about 30,5-31 mh/s with rx 580!!! Yes, its possible to get 31 mh/s but how long?? Rig will shut down after 1 hour, 3 hour..in the best case rig will shut down after 24 h.
Hello everyone,
I'm fairly new into mining and I just want to share with you my experience with a Radeon RX 580 GPU paired with Hynix memory.
My card is a Sapphire RX 580 8GB Nitro+ Special Edition (blue card; dual bios, factory OC: GPU @ 1430MHz / Mem @ 2100MHz) with 1x 8-pin and 1x 6-pin power ports.
I'm currently mining ETH and Decred on Windows 10, AMD blockchain driver and using Claymore 10.0 dual miner.
Going with the stock bios this card got me around 15-16 Mh/s, while the OC version went up to 18 Mh/s.....a little disappointed as everybody else (from what I've read online) gets 24-25 Mh/s stock (correct me if I'm wrong here ). I overclocked the memories a little bit more and gained a max 20 MH/s, but temps went even higher ~74 degrees Celsius, fans louder and eventually memory errors started to show up in HWInfo.
Then I started do modify the stock non-OC bios with SRBPolaris V3 and changed the 1750, 2000 and 2100 straps from the Hynix section with this (found on anorak.tech):
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
Now, running claymore with the GPU @ 1150Mhz / 950mV and mem @ 2250MHz / 950mV (values sent as parameters to claymore), the card gets me ~30.8 MH/s (ETH) + ~919.300 Mh/s (Decred), while drawing ~120 Watts (reported by GPU-Z). My system has been mining for 2 days straight with no GPU memory errors reported and temperatures are staying at ~55 degrees Celsius, fans 49%.
With all these mods done to the card I am quite satisfied with it and I'm planning on getting more
Sorry for the long post and I do hope that the above info will be of some help to people who have RX 580 GPUs with Hynix memory.
Cheers!
I'm fairly new into mining and I just want to share with you my experience with a Radeon RX 580 GPU paired with Hynix memory.
My card is a Sapphire RX 580 8GB Nitro+ Special Edition (blue card; dual bios, factory OC: GPU @ 1430MHz / Mem @ 2100MHz) with 1x 8-pin and 1x 6-pin power ports.
I'm currently mining ETH and Decred on Windows 10, AMD blockchain driver and using Claymore 10.0 dual miner.
Going with the stock bios this card got me around 15-16 Mh/s, while the OC version went up to 18 Mh/s.....a little disappointed as everybody else (from what I've read online) gets 24-25 Mh/s stock (correct me if I'm wrong here
). I overclocked the memories a little bit more and gained a max 20 MH/s, but temps went even higher ~74 degrees Celsius, fans louder and eventually memory errors started to show up in HWInfo.Then I started do modify the stock non-OC bios with SRBPolaris V3 and changed the 1750, 2000 and 2100 straps from the Hynix section with this (found on anorak.tech):
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
Now, running claymore with the GPU @ 1150Mhz / 950mV and mem @ 2250MHz / 950mV (values sent as parameters to claymore), the card gets me ~30.8 MH/s (ETH) + ~919.300 Mh/s (Decred), while drawing ~120 Watts (reported by GPU-Z). My system has been mining for 2 days straight with no GPU memory errors reported and temperatures are staying at ~55 degrees Celsius, fans 49%.
With all these mods done to the card I am quite satisfied with it and I'm planning on getting more
Sorry for the long post and I do hope that the above info will be of some help to people who have RX 580 GPUs with Hynix memory.
Cheers!
16 MH/s stock is insanely low. I have two Sapphire 580 4GB (Hynix) and got 24 out of the box. With Anorak's power save BIOS I get 27.x. Not great but I haven't been able to get any more than that. Anorak's memshift BIOSes were no better. I'll try your posted clock value later, would love to get 30 even if it's a bit power hungry.
Most Sapphire RX 570/580 cards have two sets of memory timings, each from a different brand. My Sapphire Pulse RX 580 4GB has Elpidia in the 1: set of timings and Hynix for the 2: timings. PBE v1.6 'one click timing patch' will apply the performance strap for each set of straps based on which memory type it detects.
I would try the PolarisBiosEditor v1.6 'one-click timing patch' bundled performance strap. I have a Sapphire Pulse RX 580 4GB. With the PBE bundled strap, 1150 MHz core clock, 2050 MHz memory clock, -96 mV underclcok and -15% power limit in Afterburner -dcri 30 I get 29.8 MH/s ETH and 895 MH/s DCR dual mining with 125-145W shown in GPU-Z.
https://github.com/jaschaknack/PolarisBiosEditor
https://github.com/jaschaknack/PolarisBiosEditor
Nice !! Thanks a lot, I'll try that right away
Edit : what is the brand of your card's memory ? Hynix or Samsung ?
I would try the PolarisBiosEditor v1.6 'one-click timing patch' bundled performance strap. I have a Sapphire Pulse RX 580 4GB. With the PBE bundled strap, 1150 MHz core clock, 2050 MHz memory clock, -96 mV underclcok and -15% power limit in Afterburner -dcri 30 I get 29.8 MH/s ETH and 895 MH/s DCR dual mining with 125-145W shown in GPU-Z.
https://github.com/jaschaknack/PolarisBiosEditor
https://github.com/jaschaknack/PolarisBiosEditor
Jump to: