Corsair RM1000 powering 2 Antminers S3

dsheaffer

member

Activity: 98

Merit: 10

Quote from: aurel57 on August 01, 2014, 04:31:03 PM

I have that same corsair. The other thing is once you put the paperclip in the PSU fan will not run and it's hard to tell it's powered up. The fan will not kick on until the load gets high enough and really gets pretty warm before that happens. I have a small case fan running to keep it cooler.

Odd...I have six CX500s using the paperclip method (put a piece of electrical tape over the clip to prevent inadvertent electrical contact)...When I power the PSUs, the fans spin right away.

aurel57

legendary

Activity: 1232

Merit: 1000

I have that same corsair. The other thing is once you put the paperclip in the PSU fan will not run and it's hard to tell it's powered up. The fan will not kick on until the load gets high enough and really gets pretty warm before that happens. I have a small case fan running to keep it cooler.

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Quote from: vortexz on August 01, 2014, 08:46:01 AM

ok cheers !
thanks for patience with a noob like me.
now setting the 2nd PSU will be a piece of cake Cool

First, congrats on your foray into mining... it's addictive.

Each S3 requires a minimum of 2 PCI-e connectors. The RM1000 has 8, so you're good to go. The PSU has 6 PCI-e connection points which are clearly labeled. You'll also have 6 PCI-e cables, 2 of which will have a "double" end giving you the total of 8 available connections. You plug the 8-pin end into the PSU, and the 6-pin end into your S3 (the 6-pin end is actually a 6+2 setup... pull the "2" away and plug the 6 into the S3). Make sure you plug 1 PCI-e connector into each side of the S3... don't plug them both into the same side.

For the paper clip, go here: http://www.corsair.com/en-us/rm-series-rm1000-80-plus-gold-certified-power-supply and click on the "FAQ and Support" tab, then the "PSU Paper Clip Test". Scroll down to see a picture of the ATX plug with the proper holes highlighted. Shove your paper clip into those holes.

vortexz

legendary

Activity: 1120

Merit: 1001

ok cheers !
thanks for patience with a noob like me.
now setting the 2nd PSU will be a piece of cake Cool

jimmothy

hero member

Activity: 770

Merit: 509

Both work.

vortexz

legendary

Activity: 1120

Merit: 1001

now i'm confused again.is it right or wrong ?

should be like this: 2 pins open to the right

or like this: 3 pins open to the right

Gogreen

sr. member

Activity: 392

Merit: 250

it works for me Grin

jimmothy

hero member

Activity: 770

Merit: 509

Quote from: vortexz on August 01, 2014, 08:27:15 AM

Quote from: Gogreen on August 01, 2014, 08:22:37 AM

Yes. Wait I think you got the wrong pinin it?

why wrong ? I have 3 pins uncovered to the right? the paper clip goes into the 4th and 5th pin,shouldn't that be right ?

You've got it right.

You only need to connect the green pin to a black one.

Also found a corsair endorsed tutorial: http://www.corsair.com/en-us/blog/2011/may/testing-your-corsair-power-supply

Gogreen

sr. member

Activity: 392

Merit: 250

Quote from: Gogreen on August 01, 2014, 08:31:33 AM

Quote from: vortexz on August 01, 2014, 08:27:15 AM

Quote from: Gogreen on August 01, 2014, 08:22:37 AM

Yes. Wait I think you got the wrong pinin it?

why wrong ? I have 3 pins uncovered to the right? the paper clip goes into the 4th and 5th pin,shouldn't that be right ?

2 pin should be

i will post my

vortexz

legendary

Activity: 1120

Merit: 1001

I can see 3 pins in this picture:

is it wrong in this picture ?

Gogreen

sr. member

Activity: 392

Merit: 250

Quote from: vortexz on August 01, 2014, 08:27:15 AM

Quote from: Gogreen on August 01, 2014, 08:22:37 AM

Yes. Wait I think you got the wrong pinin it?

why wrong ? I have 3 pins uncovered to the right? the paper clip goes into the 4th and 5th pin,shouldn't that be right ?

2 pin should be

vortexz

legendary

Activity: 1120

Merit: 1001

Quote from: Gogreen on August 01, 2014, 08:22:37 AM

Yes. Wait I think you got the wrong pinin it?

why wrong ? I have 3 pins uncovered to the right? the paper clip goes into the 4th and 5th pin,shouldn't that be right ?

Gogreen

sr. member

Activity: 392

Merit: 250

Yes. Wait I think you got the wrong pinin it?

vortexz

legendary

Activity: 1120

Merit: 1001

Quote from: jimmothy on August 01, 2014, 07:58:02 AM

Here are the connections you need:

2 pci-e connected from the psu (8 pin) to the miner (6 pin). Also make sure you don't put them both on the same board.

1 20pin cable (with a paperclip) plugged into the psu.

Then just plug the psu power cable into the wall outlet and when you flip the switch it should turn on.

ok, got the first part, 2 pcie (8 win) into the psu and 6 pin into the miner.

now on the 20+4 cable

I have put the paperclip like this, and have to connect the other part of the cable into the PSU, right ? the other end is 10 PIN + 14 PIN (24 PIN total). I have to put all pins into the PSU ?

Gogreen

sr. member

Activity: 392

Merit: 250

Well is she hashing? No?

jimmothy

hero member

Activity: 770

Merit: 509

Here are the connections you need:

2 pci-e connected from the psu (8 pin) to the miner (6 pin). Also make sure you don't put them both on the same board.

1 20pin cable (with a paperclip) plugged into the psu.

Then just plug the psu power cable into the wall outlet and when you flip the switch it should turn on.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: vortexz on August 01, 2014, 07:16:48 AM

Hello.I just bought a RM1000 PSU to power 2 antminers S3 but I have no ideea how to set it up.

1.I have many many cables coming with the PSU I don't know which ones to use ???which ones have to go into the PSU and which ones into the S3 ?
can someone give me some examples with screens??

2.In this tutorial https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653 it says I need to insert a paper clip into the green and black wires, but all my wires are black, how am i supposed to know where to insert the paperclip Huh

stop everything you sound like you will fry your gear. go to ebay and got to this seller

http://www.ebay.com/itm/JUMP-START-EPS-ATX-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251324032532?pt=US_Power_Cables_Connectors&hash=item3a84146614

http://www.ebay.com/itm/BLACK-JUMP-START-ATX-EPS-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261384576914?pt=US_Power_Cables_Connectors&hash=item3cdbbc1f92

http://www.ebay.com/itm/JUMP-START-EPS-ATX-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029042274?pt=LH_DefaultDomain_0&hash=item3a727f3462

http://www.ebay.com/itm/JUMP-START-ON-OFF-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261256302157?pt=US_Power_Cables_Connectors&hash=item3cd416ce4d

http://www.ebay.com/itm/JUMP-STARTATX-20-PIN-PS-JUMPER-W-ROCKER-ON-OFF-SWITCH-MADE-IN-AMERICA-/261303017587?pt=US_Power_Cables_Connectors&hash=item3cd6dfa073

http://www.ebay.com/itm/JUMP-START-EPS-ATX-24-PIN-PS-JUMPER-W-ROCKER-ON-OFF-SWITCH-MADE-IN-AMERICA-/261302980079?pt=US_Power_Cables_Connectors&hash=item3cd6df0def

I do not make any money from him
make an offer for some of them. I purchased about 1 dozen from him.

I am anti-paper clip ! This cost more then a paperclip, but for guys like you it is the correct item to buy.

notlist3d

legendary

Activity: 1456

Merit: 1000

With this PSU you will have to do some counting. It has a sleek all black cable's. So no colors, but if you look at picture or another psu you can count as all cables are black.

As always be careful with electiricity/psu. Don't count wrong or from wrong side.

If paperclip is in right slots... you just plug it in and it turns on. If you question if you did it right you can get a switch online.

Gogreen

sr. member

Activity: 392

Merit: 250

Quote from: vortexz on August 01, 2014, 07:43:34 AM

ok, yes, it is 20+4
I have put the paperclip in,now what ? where do i put the cable to start the PSU ?
Sorry for these extremely noob questions, never used a PSU before.

Setting up using 8pin hole from the psu with the 8pin pciexpress cable . The cable with one end of 8pin and the other end is 6pin pice.

vortexz

legendary

Activity: 1120

Merit: 1001

ok, yes, it is 20+4
I have put the paperclip in,now what ? where do i put the cable to start the PSU ?
Sorry for these extremely noob questions, never used a PSU before.

jimmothy

hero member

Activity: 770

Merit: 509

Quote from: Gogreen on August 01, 2014, 07:40:45 AM

Quote from: ?? on ??

I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh

the first 4 pin is removable from either side look carefully

I've got an RM750 and only the 4 pins on the right side are optional (with the latch on top)

Gogreen

sr. member

Activity: 392

Merit: 250

Quote from: ?? on ??

I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh

the first 4 pin is removable from either side look carefully

Just follow photo from https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970 the pin lock facing you and count from the right side

jimmothy

hero member

Activity: 770

Merit: 509

Quote from: ?? on ??

I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh

Should be 20+4 pin.

Gogreen

sr. member

Activity: 392

Merit: 250

https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
Setting Up the PSU (ATX Computer Power Supply)

Setting up using 8pin hole from the psu with the 8pin pciexpress cable . The cable with one end of 8pin and the other end is 6pin pice. Get it?

jimmothy

hero member

Activity: 770

Merit: 509

You need 2 pci-e (6 pin) for powering the miner (should be labeled and the only ones that fit)

For starting the psu just count the pins. It's the same as colored ones.

vortexz

legendary

Activity: 1120

Merit: 1001

Hello.I just bought a RM1000 PSU to power 2 antminers S3 but I have no ideea how to set it up.

1.I have many many cables coming with the PSU I don't know which ones to use ???which ones have to go into the PSU and which ones into the S3 ?
can someone give me some examples with screens??

2.In this tutorial https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653 it says I need to insert a paper clip into the green and black wires, but all my wires are black, how am i supposed to know where to insert the paperclip Huh

Topic: Corsair RM1000 powering 2 Antminers S3 (Read 2526 times)