Topic: CryptoDredge 0.27.0 — CUDA Miner - page 33. (Read 86186 times)

Yes, I tried that and it worked. Thank you!
Yet miner still crashed though (even though it runs well with Lyra2z with the same OC).
Well, I guess I need to lower the OC.

Try "--intensity=5"

Hi cryptodredge dev. Please help.
I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10).
I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti.
Is this a bug? Need your advise. Thank you.

Excellent work on improving CryptoDredge.
Had used version 0.40 to mine neoscrypt,

Just downloaded ver 0.91 to compare hashrates on phi2 between it z-enemy 1.20 32bit

On my 1080  hashrate rose from 5.1mh to 6.8mh (pl 100 mem +450 core +80)
On my 1080ti hashrate rose from 7.2mh to 9.0mh(pl 120 mem +450 core +150) (9.2mh with ethenlargementpill and mem +290 but miner was unstable)

3.5mh increase in performance over two cards is fantastic.
I tip my hat to you good sir 

I get on avg. 5800mhs@197wt with 1080Ti's and 4520mhs@152wt with 1080's in lyra2z and 77.5mhs@195wt with 1080Ti's and 58.5@148wt with 1080's in lyra2rev2.

getting 5.1MH/s of lyra2z @ 63% tdp and mild overclocking on a 1080ti

Hello CryptoDredge
I am running windows 8.1. I have one 1080Ti. Both the newer and older versions of cryptodredge crashes my card after the dev fee session is over. Any help would be greatly appreciated. Thanks

[21:17:48] INFO  - Received new job #0000008681c94b00
[21:17:49] INFO  - GPU0 Zotac GTX 1080 Ti : 74.89MH/s (Avr 74.90MH/s) : 415.9KH/W : T=66C Fan=66%
[21:17:49] INFO  - GPU1 EVGA GTX 1080 : 59.20MH/s (Avr 58.35MH/s) : 395.0KH/W : T=63C Fan=63%
[21:17:49] INFO  - GPU2 EVGA GTX 1080 : 58.77MH/s (Avr 58.60MH/s) : 393.8KH/W : T=61C Fan=61%
[21:17:50] INFO  - GPU3 EVGA GTX 1080 : 55.71MH/s (Avr 56.91MH/s) : 386.5KH/W : T=65C Fan=65%
[21:17:50] INFO  - GPU4 MSI GTX 1080 : 56.85MH/s (Avr 56.95MH/s) : 390.7KH/W : T=61C Fan=61%

i got around 30mh/sec increase on my rig compared to nicehash v2 miner, TDP 70% and some oc, that is lyra2v2 algo, on lyra2z i got double hashrate both on nicehash servers

I am testing cryptodredge miner I am getting the following hashrate.

For the DEV: the link for linux says cuda 9.2 but it's 9.1

[21:32:22] INFO  - 309/1 Accepted : diff=0.0645552 : 31.98MH/s
[21:32:35] INFO  - 310/1 Accepted : diff=0.154513 : 31.99MH/s
[21:32:39] INFO  - 311/1 Accepted : diff=0.410497 : 31.99MH/s
[21:32:43] INFO  - 312/1 Accepted : diff=0.159228 : 31.99MH/s
[21:32:47] INFO  - 313/1 Accepted : diff=3.03792 : 31.99MH/s
[21:32:55] INFO  - 314/1 Accepted : diff=0.107269 : 31.99MH/s
[21:33:03] INFO  - Received new job #367
[21:33:05] INFO  - 315/1 Accepted : diff=0.0659558 : 31.99MH/s
[21:33:10] INFO  - 316/1 Accepted : diff=0.256149 : 32.00MH/s
[21:33:14] INFO  - 317/1 Accepted : diff=0.165821 : 32.00MH/s
[21:33:20] INFO  - 318/1 Accepted : diff=0.0632887 : 32.00MH/s
[21:33:20] INFO  - 319/1 Accepted : diff=0.288156 : 32.00MH/s
[21:33:21] INFO  - 320/1 Accepted : diff=0.0783204 : 32.00MH/s
[21:33:46] INFO  - 321/1 Accepted : diff=3.99957 : 32.01MH/s
[21:33:50] INFO  - 322/1 Accepted : diff=0.277357 : 32.01MH/s
[21:34:05] INFO  - 323/1 Accepted : diff=0.0627724 : 32.01MH/s
[21:34:07] INFO  - Received new job #368
[21:34:14] INFO  - GPU0 Zotac GTX 1080 Ti : 5504KH/s (Avr 5409KH/s) : 29.69KH/W : T=68C Fan=80%
[21:34:14] INFO  - GPU1 Zotac GTX 1070 Ti : 3839KH/s (Avr 3763KH/s) : 29.75KH/W : T=58C Fan=75%
[21:34:14] INFO  - GPU2 Zotac GTX 1070 Ti : 3960KH/s (Avr 3876KH/s) : 30.55KH/W : T=57C Fan=75%
[21:34:14] INFO  - GPU3 Zotac GTX 1070 Ti : 3770KH/s (Avr 3803KH/s) : 30.39KH/W : T=58C Fan=75%
[21:34:14] INFO  - GPU4 Zotac GTX 1070 Ti : 3930KH/s (Avr 3860KH/s) : 30.45KH/W : T=58C Fan=75%
[21:34:14] INFO  - GPU5 Zotac GTX 1060 6GB : 2275KH/s (Avr 2222KH/s) : 26.31KH/W : T=56C Fan=75%
[21:34:14] INFO  - GPU6 Zotac GTX 1060 6GB : 2318KH/s (Avr 2269KH/s) : 26.13KH/W : T=56C Fan=75%
[21:34:14] INFO  - GPU7 Zotac GTX 1060 6GB : 2318KH/s (Avr 2268KH/s) : 26.01KH/W : T=59C Fan=75%
[21:34:14] INFO  - GPU8 Zotac GTX 1060 6GB : 2293KH/s (Avr 2246KH/s) : 26.17KH/W : T=53C Fan=75%
[21:34:15] INFO  - GPU9 Zotac GTX 1060 6GB : 2327KH/s (Avr 2298KH/s) : 26.46KH/W : T=58C Fan=75

cryptodredge 0.9.1 works like a charm on hive os on rig with 7x 1080ti
doesnt work at all on 13x 1070ti, it is just giving zero hashrate

tho cryptodredge is working on simpleminingos with 13x 1070ti rig

Now the download page gives an unsafe connection warning, is there an issue with the official website ?

Also is there any improvement for 1080 TI's from 0.9.0 to 0.9.2, or soon to come up in future updates ?..

I think "-r" option could use a quick fix. First: param "0" should fail the connection after first try and exit the binary. That way we can finally achieve algo switching with CryptoDredge (just like it works in ccminer). Also, changing "-r" param to 1, 2, 3.. and so one has no effect. CryptoDredge re-tries to connect to the pool indefinitely. Can we please have this fixed in the next release?

Is there any improvement on algos with CUDA 9.1 vs CUDA 9.2 ?

If anyone has a similar issue, the way I fixed this was by putting the settings into the config.json file, and running the .exe on it's own without using a .bat file. For some reason running the .bat file for what I was mining just refused to work.

Hi guys anyway to get this working with CUDA 3.5 as just got a Nvidia Geforce-Gtx Titan which is 3 years old.

Running 64bit windows 10 and latest nvidia driver.

Thanks for the help.

cool app . i should use it

I get this weird issue -

https://i.imgur.com/fMOU3Bg.png

Windows 7 64 Bit ,have tried 388.71 / 398.36 / 399.07 / 399.24 drivers. Have disabled AV. Have tried Cuda 9.1 and 9.2 versions

@cryptodredge

On release 0.8.0   I was getting 1.25 kh/s on my 750ti compute 5.0 cards. On 0.9.1 I only get 900 kh/s.  And 0.8.0 won't let me hash now..I get an error message [14:36:47] ERROR - Not authorized [14:36:47] ERROR - Operation was aborted by timeout.
Any way to mine with 0.8.0 ?
The drivers are 398.82. And the newer drivers have an issue.   Thx  

EDIT: I forgot to say on phi2 algo . And only gives that error message on phi2 algo.
CryptoDredge_0.8.0_windows-7-28-2018.exe -a phi2  -d 0,1  -i 6 -o stratum+tcp://yiimp.eu:8332 -u  addy -p LUX,HC

anyone else having problems with lyra2z / lyra2v2 on current dredge / driver versions?
Other algos run fine, but lyra2(z andv2) crash almost immediately.

I too have seen the CN Heavy errors. I put in an issue request on Github, and emailed Cryptodredge per their website.
Hopefully, they get a look at this soon!