cheers
Foofighter
Topic: Custom Case Design for Bitfury SHASH Miners// and Burnin FURY Miners - page 2. (Read 4994 times)
October 02, 2013, 04:24:22 PM
Finally I got the cases, but I had no time for further examination so far.
cheers
Foofighter
cheers
Foofighter
September 20, 2013, 08:38:01 AM
Shouldn't the case read "S-HASH MINER powered by BITFURY"?
September 20, 2013, 06:00:43 AM
A small heat sink and a single fan in front should be plenty. The Bitfury chips don't create a lot of heat.
yeah, but this is a small enclosed case have to test this
Best for cooling is if you can force the air through a channel in only one direction. For example something like an airflow pipe.
Also reduce the unused space between, to increase the airflow.
Check out Serverhardware its the same principle, most common problem is the loudness of such designs.
Youre design is nice to look at.
September 12, 2013, 10:50:40 AM
I like your design
But It'll be expensive.
I'll come out with not so fancy , but cheaper desighn.
I can still produce this if you want
But It'll be expensive.
I'll come out with not so fancy , but cheaper desighn.
I can still produce this if you want
September 08, 2013, 04:12:35 PM
Of course, test it. But you're looking at maybe 40 watts, tops. It's not going to take much air movement to cool it.
September 08, 2013, 04:02:48 PM
A small heat sink and a single fan in front should be plenty. The Bitfury chips don't create a lot of heat.
yeah, but this is a small enclosed case have to test this
September 08, 2013, 04:00:32 PM
A small heat sink and a single fan in front should be plenty. The Bitfury chips don't create a lot of heat.
September 08, 2013, 01:28:38 PM
Hey guys,
this Case design was made in close contact with intron and cscape the devs of the most Bitfury based Boards.
The Basic idea is to house 1-2 hash cards and cool them accordingly, we are not yet sure if the cooling is perfect but will test this soon when case protos arrive.
As the Shash cards can be OCed a lot and the purpose of the Shash cards was primarily to provide some standalone Miners we decided it doesnt make sense in the first place to make a bigger Case for more Cards, but this could still be a possibility.
Please note: Iam not sure if that many Fans are needed, this is just for OC testing, maybe just a front Fan and bigger Heatsinks are sufficient. If its ok to use a smaler Heatsink the Case could also be smaller accordingly
################################################################################################################################################
Shash Solo/duo Case
Features:
#space for up to 3 - 92mm Fans
#one addtional 60mm Fan can be mounted when using only 1 SHash board
#safely transportable
#stackable
#Basic dimensions bxhxt =124x114x202mm
Pictures:
3D pictures
Manufaturer pictures:
Finished and assambled case pictures:
################################################################################################################################################
this Case design was made in close contact with intron and cscape the devs of the most Bitfury based Boards.
The Basic idea is to house 1-2 hash cards and cool them accordingly, we are not yet sure if the cooling is perfect but will test this soon when case protos arrive.
As the Shash cards can be OCed a lot and the purpose of the Shash cards was primarily to provide some standalone Miners we decided it doesnt make sense in the first place to make a bigger Case for more Cards, but this could still be a possibility.
Please note: Iam not sure if that many Fans are needed, this is just for OC testing, maybe just a front Fan and bigger Heatsinks are sufficient. If its ok to use a smaler Heatsink the Case could also be smaller accordingly
################################################################################################################################################
Shash Solo/duo Case
Features:
#space for up to 3 - 92mm Fans
#one addtional 60mm Fan can be mounted when using only 1 SHash board
#safely transportable
#stackable
#Basic dimensions bxhxt =124x114x202mm
Pictures:
3D pictures
Manufaturer pictures:
Finished and assambled case pictures:
################################################################################################################################################
Jump to: