Topic: Custom Firmware Release for S7 and S5 Miner all Batches - page 2. (Read 9976 times)

just bought a copy for my s5 gonna give it try .


This does work on a S5 and the License key keeps putting me in the old style firm ware with CG miner 4.8 . not the new one unless it doesn't work on a S5 if that's so id change your tittle and make it more clear what it dies work on fix the web site when we hit English it actually doesn't switch to full English, there is to much missing stuff.

or is there a better walk thu some place i can trouble shoot by to see what i may have dome wrong.

I had to use a translator pretty much sense it wouldn't switch over right in English to buy the software .


edit : got it working kind of  I had to re burn the image that let me in, found were it says s5 and tired changing it to S5 can't get it to save any setting in the new look but it will in the old look but only in the S7 mode .
 can't change the ip or don't understand how to yet .

Hmm, why was I am developing this software?

Because I was updating my miner with the original bitmain software and after that my bbb was bricked by this bs software, then I discovered that there was an sd slot and started from this moment my development.

And now my miner is running only from sd card.

You can try it. Buy it, test it and if your miner still does not work, let me know and I will send you your money back as fast as you paid for.


The bitmain bbb has 9 sections on Nand chip, the main reason why it is bricked is the section 1-5 (where section 4 is every time empty) I think your miner cant access the kernel on section 5 because the section 1,2 and 3 are redundant, but not the kernel and for this:

YES it will recover your board.

Next week when I have more positive feedback about the firmware I will publish a flashing one, which you can use (flash) from the old front page.

It will also contain a hacked part to open all 9 ports on the mining board (not tested jet) I have programmed it jet, but atm the kernel do not load it atm because
the original kernel is programmed to load a driver part only from nand.



 

I thought the same when reading it. Does this mean it is running from the SD card on S7?  As that was a amazing feature on S4's and C1's.  And if so would give your custom firmware a serious bump in coolness.

If it does run from SD can you run it on a S7 that has a bad flash and bricked?  Or does it need to have the original firmware still working on the BBB?

SD card on s7?

I am all for paying, I just want to make sure in the end it saves me money or makes me money.

Yes it is fixed! Inside the original firmware. You can change the voltage from 0600 to 0900 on my firmware.

The effect? I don't know atm. what are the differences.

Thanks for this, would love to try this on my S7 with a "dead" board!

But, does the S7 use SD card? :O

Edit: You want 20EUR for your firmware, per machine? Nevermind! ^^

Can't wait to try it

Edit: how much less power on average are they consuming with a S7

Does the undervolt actually work? I assumed the voltage was fixed for the S3,S5,S7

I wish you 10 on BlockFriday

Got the copy and will download and install tonight.  Can't wait to find some blocks 

Now on SALE again !

edit: 24th June 2016

We released a brand new Firmware for Bitmain Antminer S5 and S7 (called MinToRRo) here:
https://bitcointalksearch.org/topic/mintorro-bitmain-antminer-firmware-s5-s7-the-flash-one-1512744


We have now an agreement with the Cryptoglance Team (statement here https://bitcointalksearch.org/topic/m.15346329)
-------------------------------------------------------------------------------------------------------------------------------------------------

This firmware (as it is) needs a permission from the developers of http://cryptoglance.info/

Custom Firmware Release für S7 ans S5 Miner all Batches!




Demo Video: https://www.youtube.com/watch?v=F6IcHAj8vzs

german support: https://bitcointalksearch.org/topic/biete-antminer-s7-and-s5-custom-firmware-all-batches-1299240

Features:

* with cgminer 4.9.2 (world first for Bitmain Hardware) and 4.8.0 (the old one)

* cgminer-api fresh compiled

* this firmware recovers nearly every beagleboard! (if you was using the bitmain upgrade and your board is death)

* basis crypto glance software

* overvolt

* undervolt

* temperatur controll

* 4 Mode system: Z-480, Z-492, Overkill, Old-Mod

* pool change on the fly (without restart)

* open cgminer config (you can make changes without ssh into you system)

* sFtp service

* set suggested diff (better pool handling)

* many experimental settings
  - Timeout
  - Voltage
  - Mhz

* less power consumption

* error control

* more hash power
  (better settings / handling with errors, timeout, slots/chips = better error correction
    Changes on Bitmain driver, also under the hood of Cgminer Software 4.9.2 (Overkill - Mode), also with your own settings!)

* temperature and fan control app (built in)

* automatic reboot on detecting bad chips:  ooooooo xooooxo ooooxoooooooooooooox ooooooox

* api control: api listen, api port, api groups (manual setting)

* sFTP-Account

* automatic pool worker: ex. you set: worker.    and the system sets:  worker.87897389748

* redundant os system and settings

* recover death mining boards, if they stops working (give them a kick - button)

* Wallet panel

* Pool panel

* fresh compiled lighttpd, with Php and sCurl support

Fixes:

to many to post them all (atm)

How to upgrade:

* download the image file from our portal, (password for the file: zwilla)
   - burn it on uq - sd card,  - plug it into you miner and reboot

* Use this Program please to burn the SD-Card image:
    Windows: https://sourceforge.net/projects/win32diskimager/
    OSx: http://ivanx.com/raspberrypi/files/PiFiller.zip
    Ubuntu Desktop: Use the diskimager (but unmount all partitions before)
    Linux command line: ex. dd if=SD-IMAGE-ZWILLA-MOD-v019.img of=/dev/sdb

* we do not touch your original firmware!

HOW TO CHANGE NETWORK SETTINGS: https://youtu.be/5QD8NRQTLNE
Proof of stable work on cgminer 4.9.2 https://youtu.be/8lfyZcIKQ10

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

If you are a reseller of mining hardware, let us know and we send you a free copy.


More informations here:
https://www.zwilla.de/faq-items/custom-firmware-antminer-s7/



























Licenses and more:

You pay for:

• Our services
• hosting configurations
• access protections
• instant miner access
• notification services
• customer support service
• custom(er) adjustments
• our own developed software

You do not pay for (free software)

• crypto glance -> http://cryptoglance.info/
• cgminer -> https://github.com/ckolivas/cgminer
• Angstrom linux os -> http://www.angstrom-distribution.org/
• Bitmain original Firmware -> https://github.com/bitmaintech/Antminer_firmware
• uBoot -> http://git.denx.de/?p=u-boot.git;a=summary
• Boulder Dash -> https://github.com/jakesgordon/javascript-boulderdash
• and many many others -> https://www.github.com