Depends on algo, for ETH values that give significant rate are located in RAS/CAS.
Topic: Custom RAM Timings for GPU's with GDDR5 - DOWNLOAD LINKS - UPDATED - page 50. (Read 155685 times)
March 11, 2017, 11:30:02 AM
March 11, 2017, 11:08:05 AM
Custom.
mind sharing that strap, or at least give a hint at some values you changed?
March 11, 2017, 03:07:06 AM
Custom.
March 11, 2017, 01:41:28 AM
What strap do you guys use for samsung? Custom or 1625 strap?
March 10, 2017, 04:43:13 PM
what VDDC offset?
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
-69V From Bios . pulling around 880W ATW from 6 cards .
Here's my latest update on Linux --> 3x Sapphire Nitro+ RX 480 OC 8GB, Sapphire Nitro+ 2x RX 480 8GB, 1x MSI Armor 470 4G all Samsung
{ "gpu_temp": " 61 61 60 61 62 61", "gpu_fanspeed": " 40 60 40 23 33 21", "gpu_core": " 1165 1100 1145 1165 1165 1145 ", "gpu_memory": " 2120 2050 2120 2120 2050 2120 " }
GPU0 -100mV, GPU1 -100mV, GPU2 -125mV, GPU3 -100mV, GPU4 -100mV, GPU5 -125mV -> ATW consumption 816W
Here's what these are doing on windows --> Almost the same config but 1 Nitro+ OC was at 2120 not 2050(probably bad batch, so I lowered it to get it stable)
March 10, 2017, 03:01:50 PM
what VDDC offset?
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
-69V From Bios . pulling around 880W ATW from 6 cards .
March 10, 2017, 10:54:15 AM
Hello, can someone please tell me if these values are correct?
----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
TCKSRE = 2, TCKSRX = 2, TCKE_PULSE = 3, TCKE = 19, SEQ_IDLE = 7, TCKE_PULSE_MSB = 0, SEQ_IDLE_SS = 0----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
By my calculations. Else is fine.
EDIT: I wouldn't touch PMG timing
Thank you! I won't touch PMG, not sure what is its purpose anyway. Not very experienced at this stuff. I'll just play with RAS, CAS, MISC.... brick my card maybe...
March 10, 2017, 09:24:58 AM
what VDDC offset?
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
Try those on linux
Also I didn't push the gpus too far, so they're a bit loosened..I'll post my best results on windows later.
March 10, 2017, 04:45:28 AM
840W ATW 6x Sapphire Nitro+ RX 480
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
Same clocks as you (Rejected shares from bad connection ){ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
March 10, 2017, 04:18:31 AM
Hello, can someone please tell me if these values are correct?
----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
TCKSRE = 2, TCKSRX = 2, TCKE_PULSE = 3, TCKE = 19, SEQ_IDLE = 7, TCKE_PULSE_MSB = 0, SEQ_IDLE_SS = 0----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
By my calculations. Else is fine.
EDIT: I wouldn't touch PMG timing
March 10, 2017, 02:44:23 AM
840W ATW 6x Sapphire Nitro+ RX 480
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
Really nice, currently i'm at 800W ATW with 4 RX 470 and a R9 290 for 140Mh
March 10, 2017, 01:55:58 AM
Hello, can someone please tell me if these values are correct?
----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
----PMG----
TCKSRE = 2
TCKSRX = 2
TCKE_PLS = 3
TCKE = 83
SEQ_IDLE = 3
TCKE_PLS_M = 1
SEQ_IDLE_SS= 0
----ARB1----
ACTRD = 21
ACTWR = 15
RASMACTRD= 41
RASMACTWD= 47
----ARB2----
RAS2RAS = 148
RP = 39
WRPLUSRP = 49
BUS_TURN = 22
hynix 1500 strap
777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
Thx!
March 09, 2017, 04:01:42 AM
I got my 2 Sapphire 470 Nitro+ 4GB with Samsung rock solid @ 29.5MH/s on eth.
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
Can you post the strap you are using? I'm not having much luck getting my Sapphire 470 over 27Mh. That's running memory at 1900 with the 1500 strap. Using the 1375 strap gives me errors mining ZEC.
Here's the 1375 & 1500 straps from the stock BIOS:
Code:
333000000000000022CC1C008CCD593AC0570D13AA09B4070048C7007A0014207A8900A002000000140D272E7B252B15
555000000000000022CC1C00AD515A3EC0570E142D4A64080048C700030114207A8900A003000000150E2A3186272E16
March 08, 2017, 09:13:37 PM
I want to jump on editing the straps, so far i have a general idea of what each of the values mean and i'll use the cheatsheet at http://www.tweakers.fr/timings.html#tRP once i can get to edit them, but i'm not sure on how to get the info for my specific memory to know where is each of the memory timings.
Where should i start?
Thanx guys!
Best regards
Where should i start?
Thanx guys!
Best regards
March 07, 2017, 02:47:11 PM
Each card is different.
I got 2 identical GPUs with 8G samsung memory and 1342 stock core I believe Sapphire Nitro+ 480 OC is the right model.
One of them did 32.5 with Claymore at 1200/2225 and was stable without errors, the other crashes after a minute on 2100 clock... so test each card individually.
PP: As it is already said dagger-hashimoto performs better with loosened timings and higher memory clock. Don't expect miracles on clocks below 2000.
I got 2 identical GPUs with 8G samsung memory and 1342 stock core I believe Sapphire Nitro+ 480 OC is the right model.
One of them did 32.5 with Claymore at 1200/2225 and was stable without errors, the other crashes after a minute on 2100 clock... so test each card individually.
PP: As it is already said dagger-hashimoto performs better with loosened timings and higher memory clock. Don't expect miracles on clocks below 2000.
March 07, 2017, 01:16:41 PM
I got my 2 Sapphire 470 Nitro+ 4GB with Samsung rock solid @ 29.5MH/s on eth.
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
Can you post the strap you are using? I'm not having much luck getting my Sapphire 470 over 27Mh. That's running memory at 1900 with the 1500 strap. Using the 1375 strap gives me errors mining ZEC.
Here's the 1375 & 1500 straps from the stock BIOS:
Code:
333000000000000022CC1C008CCD593AC0570D13AA09B4070048C7007A0014207A8900A002000000140D272E7B252B15
555000000000000022CC1C00AD515A3EC0570E142D4A64080048C700030114207A8900A003000000150E2A3186272E16
stock 1625mhz strap:
Code:
555000000000000022CC1C00CE596B44D0570F1531CB2409004AE7000B0314207A8900A003000000170F2E36922A3217
1150 / 1900mhz = 27.5mh (MSI 470 Armor 4GB)
Using Claymore in Windows, 16.11.5 drivers
I've noticed some odd behavior though... on my initial attempt I was able to gradually raise clocks on one card as high as ~2100mhz (I saw 29.5mh!), but it only seems to work if I raise the clocks while miner is already running and then pause/unpause, the initial miner / DAG loading does not seem stable with these timings at high clocks.
My other test card I seemingly had mining stable up to 2050mhz, only to find that it can't create the DAG at anything above 1965mhz without crashing the system
I've also noticed that the Samsung 4GB equipped cards doesn't seem to report any GPU memory errors in Hwinfo64, even when memory clocks are pushed high enough to cause errors / crashes in Claymore.
March 07, 2017, 11:06:28 AM
I got my 2 Sapphire 470 Nitro+ 4GB with Samsung rock solid @ 29.5MH/s on eth.
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
This is on Linux box... Maybe win would be a bit faster.
I got 30+ but it's not that stable...
Can you post the strap you are using? I'm not having much luck getting my Sapphire 470 over 27Mh. That's running memory at 1900 with the 1500 strap. Using the 1375 strap gives me errors mining ZEC.
Here's the 1375 & 1500 straps from the stock BIOS:
Code:
333000000000000022CC1C008CCD593AC0570D13AA09B4070048C7007A0014207A8900A002000000140D272E7B252B15
555000000000000022CC1C00AD515A3EC0570E142D4A64080048C700030114207A8900A003000000150E2A3186272E16
March 07, 2017, 12:54:24 AM
840W ATW 6x Sapphire Nitro+ RX 480
http://i63.tinypic.com/6rmxxu.png
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
http://i63.tinypic.com/6rmxxu.png
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
Is this the rx480 4gb or 8gb and also what memory. I have the sapphire nitro+ rx 480 4gb elpida. I currently run anorak's OC rom and can get 28.1 per card but thats it.
March 06, 2017, 11:34:17 PM
840W ATW 6x Sapphire Nitro+ RX 480
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
{ "gpu_temp": " 61 61 61 62 61 60", "gpu_fanspeed": " 45 40 40 27 29 20", "gpu_core": " 1150 1150 1150 1150 1150 1150 ", "gpu_memory": " 2125 2125 2125 2125 2125 2125 " }
Is this the rx480 4gb or 8gb and also what memory. I have the sapphire nitro+ rx 480 4gb elpida. I currently run anorak's OC rom and can get 28.1 per card but thats it.
March 06, 2017, 11:27:24 PM
Evilop;
some love for my ref MSI RX480 4gb hynix please?
1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
777000000000000022339D00CE5153379055111230CB440900208400740114206A8900A00200312 0150F292F94273116
1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312 018112D34A42A3816
1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312 019123037AD2C3A17
2000: BBB000000000000022889D0073EE8D53805515133ECF560C004E26017E0514206A8900A00200312 01C143840C5303F17
Thank you..
some love for my ref MSI RX480 4gb hynix please?
1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116
777000000000000022339D00CE5153379055111230CB440900208400740114206A8900A00200312 0150F292F94273116
1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312 018112D34A42A3816
1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312 019123037AD2C3A17
2000: BBB000000000000022889D0073EE8D53805515133ECF560C004E26017E0514206A8900A00200312 01C143840C5303F17
Thank you..
Small change
(just so you know, i'm not going to do this on a daily base.. :p)
Greetings!
Try it not stable for me, but after change it from 79 to 98 it got stable with same speed.
777000000000000022339D00CE5153398055111230CB440900208400740114206A8900A002003120150F292F94273116
Maybe cause my card not good enough, or cause I still playing game with my pc.
would i be able to use these timings on my two asus rog strix oc rx470 hynix 4gb?
i have copied the 1500 timings to all the higher values and flashed that. if i try to OC the cards mem to 2000 using afterburner or wattman i cant seem to keep it stable. im running win 7 64bit.
Jump to: