Topic: DeepBit pool thread for newbies - page 2. (Read 68897 times)

I'm still waiting for reply.
At the moment I wouldn't mine for this pool.
It only makes sense when you have the chance to get paid 

Hi! I'm new to mining. Have been mining with GUIMiner and 50miner for about 24 hours with ~50 MH/s. I see in my account at deepbit.org that I have more then 550 shares accepted. But my balance is still 0.00000000 BTC. Does anybody know if it can be OK? Or there is a problem there?
P.S.: Mining in "proportional" mode

Tycho and I emailed back and forth until he finally realized that he had to manually set my address to the original one due to issues with my e-mail.
I could not get the confirmation emails and he basically said: ok, I see now. The address is not set.
But of course if I set it: deepbit sends a confirmation email and I cannot receive that email so again the address cannot be set and no bitcoins sent to my wallet!

It is pretty crazy.
I've sent emails for weeks while staring at the charts watching bitcoin climb and climb (and fall a bit).
Can't believe I cannot get my bitcoins out to take part in the market.
It is most annoying because he said he understood the problem but still has not solved it!

Send an E-Mail to [email protected] - cause I'm still waiting for the coins.

Would be nice if somebody from the staff of the site could give us a hint.

Looks like a couple of us have this issue, I am glad it's not just me. I really wouldn't mind paying the fees out of my DeepBit account, because I could have sold my bitcoins last night for $2800 of my currency, and now they'll exchange for $1700! I really hope it doesn't take too much longer.

Hello everyone,
I have got a problem with the payout.
I have send  0,07 bitcoin about 2 days ago but until now nothing arrived.
Is anybody from the deepbit stuff here who could check my account?
My username is the same as here.

Thanks a lot
alcopop

Do you guys support cgminer or bfgminer??

What can i achieve with a 4,2ghz processor and a dual hd6870 (OC) around 500mhs ?

I have the same problem. Status of transaction is "Seen by 1 peer".

Why don't you answer me? Some people and my question?

This is the state I am now in as well. I believe in order for the transaction to propagate, a small fee like .0001 BTC is necessary to be paid by the sender. Does Deepbit not do that?

Somebody can get thier payments ? BTC left from  deppbit account but no any transaction appeared on address where i sent btc.

I am now have this message to.

 I have received a payout from DeepBit to a brand new wallet, and the transaction appears in MultiBit, but the status has been at "Seen by 4 peers. Pending/unconfirmed" for 17 hours. Is there anything I can do to confirm the transaction, or is there a problem?

Did I mess up by using a brand new wallet to receive the bitcoin? I performed the instant payout within one minute of creating the wallet.

If I try to look for the transaction on blockchain.info, it says that the "transaction is not found".


All help appreciated.

Hi guys, haven't logged into my account in a while, getting this message. I won't lie, its driving me up the wall right now:

Please_wait_for_autopayment!

In bfgminer, when looking at the pool information I see:

In My Account (https://deepbit.net/account) I only see two(2) shares accepted.

Am I missing something?
Why is there a delta?

hi.tycho! i would like to change my adress.But I can't seem to accept mail to your mail. Is not normal to send to you.

Delivery to the following recipient failed permanently:

     [email protected]

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain deepbit.net by mail.deepbit.net. [46.4.121.119].

The error that the other server returned was:
550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in virtual alias table

----- Original message -----

DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=gmail.com; s=20120113;
        h=mime-version:date:message-id:subject:from:to:content-type;
        bh=QlUVz5dsp+OgfCmeALmkaqcVnwixCR7Uef1vd3nwwno=;
        b=sh6EBd3A9Ekq87bvttidTlzDh+KYYZ1rsO1ebO/B4ZDEOEQPGCZOGudKI/wkVVXnb0
         BlNqbmjuocinoEXxY9PLYV3FVJb4Bot5Z5eLohX/NSVJhFJrqSYvaCnyYDQDpl9x9eHE
         dSfSes0uNruZ5eFSS2bgqAlbFfb/UgEik+Da57t483G57TVMkpfjtO9bJUfs9tZ1m/qO
         WbWn5ylTDo4S+VnUEaj/nzxNhfgnc73NkaBmpV3pUZoR8qK/frNiR/5zFKTwN7j7kGEH
         R23lrQIvMw0yW3pNZ/rKJi36cQXbJYGhjrkiLdPpmlv++lt7BJsAb69w7O9lE5RceV86
         pW8A==
MIME-Version: 1.0
X-Received: by 10.182.233.228 with SMTP id tz4mr1675149obc.56.1384438994777;
 Thu, 14 Nov 2013 06:23:14 -0800 (PST)
Received: by 10.60.43.104 with HTTP; Thu, 14 Nov 2013 06:23:14 -0800 (PST)
Date: Thu, 14 Nov 2013 22:23:14 +0800
Message-ID:
Subject: dear Support.
From: andez afern <[email protected]>
To: [email protected]
Content-Type: multipart/alternative; boundary=001a11c306007f3e5804eb23d2c0

Hello all!

I am completely new and I decided to make deepbit my first pool. I have a few questions though. My equipment isn't here yet but I am just testing things out ahead of time, so when it gets here I can just plug and go. My questions are

When I run "CGminer nogpu" it just crashes it is something like this

URL
deepbt.net:8332
Username
My email
Password
My password

Then it just pauses and crashes. Could it be that the computer I am doing it on is old? I am running the old school Acer Aspire One. Could it be that I do not have my equipment set up? I think this is the reason really, but I assumed that "CGminer nogpu" would just be able to connect to the server at least. Also, I am getting an Avalon 60 gh/s, and I cannot run regular "CGminer" because it says that my computer cannot find Opencl.dll if these make a difference.

Here's to hoping that Avalon Asic miner works with GUIminer


I am going to read throughout this thread to try and learn something, sorry if this was already answered in this thread

EDIT: I tried on a newer, but still old computer and now it says "Network diff set to 511M" then it says "CGminer.exe has stopped running" and closes. Again probably due to the fact that I do not have my equipment. I think I am getting some where.

EDIT: Turns out I did not have a .bat file made one and now I am in it. Of course it says no USB detected. It also says "Long-polling activated for http://deepbit.net:8332/listenChannel" whatever that means. I think I am in. No crashing or nothing. Now it is just time to wait for my equipment. Hopefully the set up of my Avalon is easy. I'll post here so you guys can laugh at my newbness. Thanks for the awesome thread! It made it a lot easier than i thought.

I was typing a reply to you, and it became working :-)
Thanks.