Deleted - page 3. | Bitcointalksearch.org

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: puwaha on October 08, 2014, 08:47:54 PM

Quote from: notlist3d on October 08, 2014, 04:21:55 PM

Quote from: MrGreenHat on October 08, 2014, 11:16:54 AM

Quote from: notlist3d on October 07, 2014, 03:49:33 PM

Quote from: MrGreenHat on October 07, 2014, 02:38:31 PM

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

No, if you use paperclip in wrong spots it could be bad. You are dealing with electricity.

What if I want I don't want to put it in the right spot?

Then you could be dealing with more current. Could possibly hurt yourself or psu. The proper spots are important.

Uh... I think he's trying to be silly notlist3d. Cheesy

I have a feeling so to. Just incase now he can't say i didnt warn him

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: notlist3d on October 08, 2014, 04:21:55 PM

Quote from: MrGreenHat on October 08, 2014, 11:16:54 AM

Quote from: notlist3d on October 07, 2014, 03:49:33 PM

Quote from: MrGreenHat on October 07, 2014, 02:38:31 PM

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

No, if you use paperclip in wrong spots it could be bad. You are dealing with electricity.

What if I want I don't want to put it in the right spot?

Then you could be dealing with more current. Could possibly hurt yourself or psu. The proper spots are important.

Uh... I think he's trying to be silly notlist3d. Cheesy

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: MrGreenHat on October 08, 2014, 11:16:54 AM

Quote from: notlist3d on October 07, 2014, 03:49:33 PM

Quote from: MrGreenHat on October 07, 2014, 02:38:31 PM

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

No, if you use paperclip in wrong spots it could be bad. You are dealing with electricity.

What if I want I don't want to put it in the right spot?

Then you could be dealing with more current. Could possibly hurt yourself or psu. The proper spots are important.

MrGreenHat

full member

Activity: 173

Merit: 104

Quote from: notlist3d on October 07, 2014, 03:49:33 PM

Quote from: MrGreenHat on October 07, 2014, 02:38:31 PM

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

No, if you use paperclip in wrong spots it could be bad. You are dealing with electricity.

What if I want I don't want to put it in the right spot?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: MrGreenHat on October 07, 2014, 02:38:31 PM

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

No, if you use paperclip in wrong spots it could be bad. You are dealing with electricity.

RodeoX

legendary

Activity: 3066

Merit: 1147

The revolution will be monetized!

I have a PSU shorted with a paper clip that has worked for years. Not for mining but for my electroplating rig. It does not seem to have damaged the clip or the power supply.

MrGreenHat

full member

Activity: 173

Merit: 104

Quote from: notlist3d on October 06, 2014, 12:27:01 PM

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

Hey, is it OK if i use a paperclip but put it in the wrong spot?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: FUR11 on October 06, 2014, 07:55:21 AM

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

Yes it is very small thats why a paperclip is commonly used. If put in wrong spot is the thing you have to make sure not to do.

FUR11

sr. member

Activity: 378

Merit: 250

FURring bitcoin up since 1762

Well, I guess they only need to establish an electric conductivity and support a couple of tiny mA, right? I don't see why a paper clip shouldn't do the trick or even damage your PSU! Then again, be warned, I'm no electrician or anything!

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: philipma1957 on October 05, 2014, 10:12:09 AM

Quote from: rsx19 on October 05, 2014, 12:52:16 AM

all it is, is a signal wire

the danger is small if you find correct holes and keep it from shorting.

Assuming you are able to do the trick i would use electrical tape to keep it in place. If done correctly it is something many do and it works fine. Just have to get the right pins.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: rsx19 on October 05, 2014, 12:52:16 AM

all it is, is a signal wire

the danger is small if you find correct holes and keep it from shorting.

but frankly just buy this

http://www.ebay.com/itm/JUMP-START-PSU-EPS-ATX-24-PIN-24p-POWER-SUPPLY-JUMPER-ON-OFF-switch-cable-50cm-/141416477255?pt=US_Power_Cables_Connectors&hash=item20ed143247

or one of these

http://www.ebay.com/itm/JUMP-START-ON-OFF-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261256302157?pt=US_Power_Cables_Connectors&hash=item3cd416ce4d

having the switch means something on a lot of psu's turning it off via the switch in the device above is better then turning it off via the switch on the back of the psu.

rsx19

full member

Activity: 182

Merit: 100

all it is, is a signal wire

kaykawa

hero member

Activity: 574

Merit: 500

Quote from: betterangels on October 02, 2014, 01:57:28 AM

i'm using paper clips since 1 year (with TT PSUs of 850w), without problem.
Just, don't conect the wrong pins.

cheers

Me too, i'm using paper clips without problem, 6 months with ants s1.

kingcolex

sr. member

Activity: 254

Merit: 1258

Quote from: defcon23 on September 26, 2014, 07:30:34 AM

no problem with the "paper clip" jumper Wink

Well my jumpers are taking a bit to come in i guess i will just have to paper clip until they do, maybe i am just being over cautious due to a psu exploding last week with no load.

betterangels

sr. member

Activity: 294

Merit: 250

i'm using paper clips since 1 year (with TT PSUs of 850w), without problem.
Just, don't conect the wrong pins.

cheers

vm1990

legendary

Activity: 1540

Merit: 1002

Quote from: kingcolex on September 26, 2014, 07:56:27 AM

Quote from: defcon23 on September 26, 2014, 07:30:34 AM

no problem with the "paper clip" jumper Wink

Well my jumpers are taking a bit to come in i guess i will just have to paper clip until they do, maybe i am just being over cautious due to a psu exploding last week with no load.

iv gone through 4 1000w PSUs and 2 main breakers on the Fuse box (who knew 4 HD4870 used so much power) did take over a year of maxing it all out for it to crap out.

anyway back to paperclips if your that worried then get a little bit of wire strip off both end and keep a bit of rubber in the middle. put the wire in the right slots and tape the entire 24pins up with electrical tape XD

defcon23

legendary

Activity: 1120

Merit: 1002

no problem with the "paper clip" jumper Wink

kingcolex

sr. member

Activity: 254

Merit: 1258

Quote from: notlist3d on September 24, 2014, 07:50:48 AM

Quote from: vm1990 on September 23, 2014, 06:04:32 PM

iv used paper clips and od bits of wire for years. teres such a small current going through it it really dosnt matter what you use aslong as it can be kept securely in place

Yep if you ever look at a motherboard is it very very small gauge wire sticking up to connect power switch to it even. As long as you get right holes its low current and many things work in its spot.

I have gone ahead and ordered some Antminer jumpers I guess out of a phobia that the paperclip will result in a short.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: kingcolex on September 24, 2014, 08:14:08 AM

Quote from: notlist3d on September 24, 2014, 07:50:48 AM

Quote from: vm1990 on September 23, 2014, 06:04:32 PM

iv used paper clips and od bits of wire for years. teres such a small current going through it it really dosnt matter what you use aslong as it can be kept securely in place

Yep if you ever look at a motherboard is it very very small gauge wire sticking up to connect power switch to it even. As long as you get right holes its low current and many things work in its spot.

I have gone ahead and ordered some Antminer jumpers I guess out of a phobia that the paperclip will result in a short.

Only thing i would do with those is cover up solder on opposite side with electrical tape if near metal.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: vm1990 on September 23, 2014, 06:04:32 PM

iv used paper clips and od bits of wire for years. teres such a small current going through it it really dosnt matter what you use aslong as it can be kept securely in place

Yep if you ever look at a motherboard is it very very small gauge wire sticking up to connect power switch to it even. As long as you get right holes its low current and many things work in its spot.

Topic: Deleted - page 3. (Read 5898 times)