Topic: DiabloMiner GPU Miner (Read 866491 times)
Hi all, is DiabloMiner working with stratum+tcp ?? I need to mine BTC with GPU, but can't get it working, don't tell me about profit, just tell me how to mine BTC with GPU, R9 270X or GF9500GT.
Hey all. I would like to see the source code for diablominer updated to handle stratum mining. I am working on a research project and this would greatly help me considering I only know java. Otherwise I would use cgminer.
Learn C. This would be invaluable for you.
Hey all. I would like to see the source code for diablominer updated to handle stratum mining. I am working on a research project and this would greatly help me considering I only know java. Otherwise I would use cgminer.
Hi here! On my Radeon HD 5570, the hashing rate is about 34.3 Mhash/s after 24 hours of testing. Is it normal? Seems it's very slow to mine at least 0.01 BTC.. 
Welcome to 2014. GPU mining used to be profitable in 2010-2012. You need ASICs to mine BTC now. Everything else is futile, and you will spend a lot more on electricity than you will ever make in BTC. Throw that card away, and buy an ASIC on a USB stick which mines at 5 Ghash/s in 2.5 W. Seriously. Forget about mining BTC on a GPU.
Hi here! On my Radeon HD 5570, the hashing rate is about 34.3 Mhash/s after 24 hours of testing. Is it normal? Seems it's very slow to mine at least 0.01 BTC..
你好好机
This project has been closed. I would suggest CUDAminer.
Does it work with NVIDIA GTX 780 graphics card?
some performance difference between sgminer end diaboloMiner?
IS there a setup DIY for windows?
I can't find a thing about setting up a config file, Only command line.
Is it faster than Cgminer (with the - k diakgcn flag)?
I can't find a thing about setting up a config file, Only command line.
Is it faster than Cgminer (with the - k diakgcn flag)?
DiabloMiner has been discontinued, please use cgminer instead
Thanks for all your work on DiabloMiner - it was the first real miner I used.
I have a look, thx
DiabloMiner has been discontinued, please use cgminer instead
Thanks for all your work on DiabloMiner - it was the first real miner I used.
DiabloMiner has been discontinued, please use cgminer instead
noo say it isn't so.Thank you for the time and effort you put into your software, it was the first miner software I used and it was simple.
I will look into cgminer, thanks again.
FGPA/ASIC support is just too difficult to manage in a cross platform way in Java.
cgminer was written by a good friend of mine who I introduced to Bitcoin, and I myself have switched over to cgminer. The DM kernel is available through cgminer as well, so its not a hard choice if you're still GPU mining.
DiabloMiner has been discontinued, please use cgminer instead
noo say it isn't so.Thank you for the time and effort you put into your software, it was the first miner software I used and it was simple.
I will look into cgminer, thanks again.
DiabloMiner has been discontinued, please use cgminer instead
can anyone help me out, I am getting HW error and noting is getting accepted. Everything used to work a few months ago then I stopped mining and now I'm trying to get it stated again.
Mobo: Asus p8z68-v pro
Ram: Corsair 4gb
HD: 32gb
Video Card: radeon 5970(sapphire and xfx)
powersupply: Coolmasters 1300w
OS: Ubuntu 12.04(64bit)
I installed amd drivers following these direction:
http://wiki.cchtml.com/index.php/Ubuntu_Raring_Installation_Guide
I installed java following these directions:
http://www.blogs.digitalworlds.net/softwarenotes/?p=41
I got diablo miner from this site:
https://en.bitcoin.it/wiki/DiabloMiner
and I am using Slush's pool with Stratum mining proxy
I don't think I'm missing anything, but if I am please let me know, any suggestions and help would be appreciated.
Mobo: Asus p8z68-v pro
Ram: Corsair 4gb
HD: 32gb
Video Card: radeon 5970(sapphire and xfx)
powersupply: Coolmasters 1300w
OS: Ubuntu 12.04(64bit)
Code:
[12/4/13 1:24:25 PM] Started
[12/4/13 1:24:25 PM] Connecting to: http://x.x.x.x:xxxx/
[12/4/13 1:24:25 PM] Using AMD Accelerated Parallel Processing OpenCL 1.2 AMD-APP (1124.2)
[12/4/13 1:24:29 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:29 PM] Added Cypress (#1) (20 CU, local work size of 256)
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling long poll support
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling roll ntime support, expire after 60 seconds
[12/4/13 1:24:30 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:33 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:33 PM] Added Cypress (#2) (20 CU, local work size of 256)
[12/4/13 1:24:35 PM] DEBUG: Invalid solution 1 from Cypress (#2)/1, possible driver or hardware issue
[12/4/13 1:24:36 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:36 PM] Added Cypress (#3) (20 CU, local work size of 256)
[12/4/13 1:24:39 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:40 PM] Added Cypress (#4) (20 CU, local work size of 256)
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:42 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:43 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:44 PM] DEBUG: Invalid solution 2 from Cypress (#2)/1, possible driver or hardware issue
[12/4/13 1:24:48 PM] DEBUG: Invalid solution 3 from Cypress (#1)/1, possible driver or hardware issue
[12/4/13 1:24:49 PM] DEBUG: Invalid solution 4 from Cypress (#3)/0, possible driver or hardware issue
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/0: Refresh work: range expired
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/1: Refresh work: range expired
mh: 1194.7/836.4 | a/r/hwe: 0/0/4 | gh: 8.6 7.7 6.7 5.7 | fps: 62.0^C
[12/4/13 1:24:25 PM] Connecting to: http://x.x.x.x:xxxx/
[12/4/13 1:24:25 PM] Using AMD Accelerated Parallel Processing OpenCL 1.2 AMD-APP (1124.2)
[12/4/13 1:24:29 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:29 PM] Added Cypress (#1) (20 CU, local work size of 256)
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling long poll support
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling roll ntime support, expire after 60 seconds
[12/4/13 1:24:30 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:33 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:33 PM] Added Cypress (#2) (20 CU, local work size of 256)
[12/4/13 1:24:35 PM] DEBUG: Invalid solution 1 from Cypress (#2)/1, possible driver or hardware issue
[12/4/13 1:24:36 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:36 PM] Added Cypress (#3) (20 CU, local work size of 256)
[12/4/13 1:24:39 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] BFI_INT patching enabled, disabling hardware check errors
[12/4/13 1:24:40 PM] Added Cypress (#4) (20 CU, local work size of 256)
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:42 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:43 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring
[12/4/13 1:24:44 PM] DEBUG: Invalid solution 2 from Cypress (#2)/1, possible driver or hardware issue
[12/4/13 1:24:48 PM] DEBUG: Invalid solution 3 from Cypress (#1)/1, possible driver or hardware issue
[12/4/13 1:24:49 PM] DEBUG: Invalid solution 4 from Cypress (#3)/0, possible driver or hardware issue
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/0: Refresh work: range expired
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/1: Refresh work: range expired
mh: 1194.7/836.4 | a/r/hwe: 0/0/4 | gh: 8.6 7.7 6.7 5.7 | fps: 62.0^C
I installed amd drivers following these direction:
http://wiki.cchtml.com/index.php/Ubuntu_Raring_Installation_Guide
I installed java following these directions:
http://www.blogs.digitalworlds.net/softwarenotes/?p=41
I got diablo miner from this site:
https://en.bitcoin.it/wiki/DiabloMiner
and I am using Slush's pool with Stratum mining proxy
I don't think I'm missing anything, but if I am please let me know, any suggestions and help would be appreciated.
Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
So here is the problem i have:
Code:
[09/10/13 12:44:38] Started
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
Your GPU is too old to support OpenCL.
so... i should give up on gpu mining, at least on the PCs with that GPU, thanks
Do to how high difficulty is now, no GPU is profitable anymore.
Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
So here is the problem i have:
Code:
[09/10/13 12:44:38] Started
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
Your GPU is too old to support OpenCL.
so... i should give up on gpu mining, at least on the PCs with that GPU, thanks
Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
So here is the problem i have:
Code:
[09/10/13 12:44:38] Started
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/
[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.
So with my basic knowledge i think is all about the drivers on my GPU,
I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?
Your GPU is too old to support OpenCL.
Jump to: